HOWTO check the type of flowgroupelement paragraph/div

Similar Questions

• How to check the type of memory installed (ECC or not)?

  all!

  I have some servers Dell PowerEdge R420 and I want to upgrade memory, install more...

  How to check the type of memory installed (ECC or not)?

  Dmidecode output here:

  Drive.google.com/.../View

  Hello.

  Unfortunately, we are not able to open the link you have provided. You can display information about your memory on the web iDRAC under hardware and memory interface. You see the type of error correction (ECC or Non ECC) within the information memory page. You can also view the same information on OpenManage Server Administrator and even make use of the memory part number to find out more information.

• How to check the type of connected database?

  Hello

  Our Application has some complications and depending on the type of database, he chooses necessary action.

  Need us:

  Is there any common query that can tell if the database is

  version 11g OR 12 c NO CBD GOLD CBD GOLD PDB 12 c 12 c.

  Our Application needs to do some prework (prechecks) before creating the schema in the data above.

  and this prework is different for each of them.

  The problem right now I m facing if I run a query "select name, CBD of v$ database" to check if the database is CBD or the CDB, NO.

  Same query executed on 11g gives an error, as the CBD is not defined in 11g.

  So, what is the best way to do it.

  Thank you.

  I imagine that if the application is an installer, it might want to be sure, there are enough Cancel to install a game potentially important objects.  I can't understand the question though.

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• How to open the file? Many types of files, check the type and call app to open it.

  HI.everyone.

  I am doing a project like dropbox.

  The problem is:

  server-side has several files of different types.

  such as: word, excel, file, file pdf image and so on.

  After the file is downloaded.

  How do I know what app is the type of file.

  and call this app to open the file?

  I can get the file type of the file name extension.

  But I do not know how to find the application that can open this file.

  or if this device have any application can open the file. Then, it will show you an alter.

  like dropbox app.

  Please help me.

  Thank you very much.

  Hello

  For above 4.3 and higher, you can use API call to achieve this. In regards to my understanding, it works as follows (Please correct if I am wrong).

  -All files (PDF, excel etc) readers save with BONE graft as "I am able to open the file whose mime the type XXX.

  - So, when you pass the path to the API Invocation, it searches for reader app there is place and request that you open the file. (I know not if more a reader installed in the device that achieved reference)

  Here's the code that worked for me,

  Invocation invocation = new  Invocation();
  invocation.setAction(ContentHandler.ACTION_OPEN);
  Registry registry = Registry.getRegistry("");
  registry.invoke(invocation);
  

  If none of the application saved in the requested file format it then throws the exception.

  Another option is to pass the path to the browser by using the private API to display the files...

  Let me know if it works for you...

  Thank you

• check the type VI for call by reference node

  Hi Ppl,

  I call a set of VI dynamically using call-by-reference node. And I have a type specifier linked to a component of a particular type connector. But at the time where the VI prototypes do not math I get the error from the open VI reference node. Is it possible to check if the components of connector VI matches before opening the refrence with the specifier of type VI?, or by using the error code is the only way to check if there was miss match to component connector VI.

  Thank you

  But what is the problem with error control?

  For example, I use the code like this in my application to detect what type of Dynamics VI should be used (decision based on the error output):

  

  Andrey.

• How to check the type of datamodel in case of response data from application of DataByConstraint in the plugin development web vsphere client

  Hello, I am new in plugin development web vsphere client.

  I need to send multiple DataByConstraintRequest (say A and B data model class) within a class of script simple action. But to handle events of response data, we use

  [ResponseHandler (name = "{com.vmware.data.query.events.DataByConstraintRequest.RESPONSE_ID}")]

  public void onVmListRetrieved (request: DataByConstraintRequest,)

  result: collection ArrayCollection): void {}

  The result is an ArrayCollection of MyVmData of the objects collection

  }

  Here how should I come to know this result variable is either A or class B data model. (including the result can be a collection of empty array)

  In case of DataByModel, we have events in response to the separate data for the data model class, but I couldn't find the same for DataByConstraint.

  You can define a unique ID_Demande for each DataByConstraintRequest and check in the response Manager.  'requestId' is a field of the class of basic DataRequest.

• How to put the type in a footer div which already has an image

  Very newbie question - but I can't seem to get the copy into the div.

  Here is my code:

  < div id = "footer" class = "footer" >

  < img src = "images / final images/surveys - footer02.jpg" alt = "Footer investigations, Inc." width = "950" height = "50" border = "0" / >

  Copyright & copy; 2011 investigations, Inc. • < a href = "mailto: " [email protected] "> [email protected] < /a > "

  < / div >

  Here's what it looks like:
  

  Thanks for taking a peek!

  Put your image in the background using CSS footer.  In addition, no not use spaces in file names or folder.  It can cause problems on the road.

  #footer {}

  Background: url (images/investigations - final footer02.jpg) no-repeat;

  Width: 950px;

  height: 50px;

  border-top: thin solid #666;

  Clear: both;

  }

  Nancy O.
  ALT-Web Design & A
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• HOWTO check the correct installation of Oracle...

  Hi all
  
  How can I check if my Oracle installation is complete and in good health? I am enter connection problems after you have created a database with the dbca Wizard. This is the track of the error:
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0
  
  This error I get when I try to log in to myself, being locally on the server. I have general connectivity issues, though more like tns-problems to research...
  
  Any idea, that I can help out the old message?
  
  Xenofon

  Make sure you have either init init.ora (GOLD).ora (OR) spfile.ora (OR)spfile .ora in location $ORACLE_HOME/dbs

  and then

  Start pfile='/u01/app/oracle/product/10.2.0/dbs/init.ora

  see your alerts and log
  Thank you

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• check the integrity of the installation program has faild: I couldn't install sogou Chinese pinying entry-type express program

  I want to type Chinese characters in a faster manner, so I decide to install sogou pinying grosgrain.  After I downloaded the program try to install it, I found that I was not able to install it.   I downloaded 2 of the program, two of them could not be installed.

  The computer shows:

  Check the integrity of the installation program has faild.  Common causes include incomplete download and damaged media.  Contact the author of the installer for a newcopy.  More information.

  http://nsis.sf.net/NSIS_Error.

  Hi Cheryy,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you can not install sogou Chinese pinying express in the computer.

  Method 1: Run the Fixit to solve common installation problems:

  Step 1:

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Open the troubleshoot program compatibility utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  Method 2: Temporarily disable the security software and firewall settings and check if you are able to install:

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put your computer in normal mode when you are done to solve the problem (as described in step 3 in the article above).

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• I'm figuring (add) a column on a PDF form and on the calculation tab, it doesn't let me select (check) the fields I want to calucalate.  It won't let me type in the fields of the box either.

  I'm figuring the shape (add) a column (sum) on a pdf file and on the calculation tab, it won't let me select (check) the fields I want to use in the calculation.  It won't let me type fields in the box either.  I'm doing something wrong?

  the mouse click on the name of the field and press the space key

• Check the file type after JavaScript File.openDialog ()...

  So I am on Mac OS and want my script obviously cancel on the bottle of 'Cancel', but also check if the selected file is a PDF file. I had some success with the code below, but some PDF, I select get cancelled with this script. While they inspected, the FilePath.type property returns "?" for some PDF files - anyone know why?

  var myFilePath = File.openDialog("Please choose a PDF file...", undefined, false);
  if((myFilePath == "") || (myFilePath == null)){
      exit();
  }
  else if(myFilePath.type != "PDF "){
      alert("Please choose a PDF file!") ;
      exit();
  }
  

  I'm quite new to scripting. Thank you!

  On Windows, all you can do is provide a file extension (the well-known "*.") PDF filter"), and it is wise to always add the catch-all" *. " ' * ' to 'all files '. In this way, a user can select a file, even if she has a bad job (and in this case, it is the responsibility of the user to ensure that the file is of the type expected nonetheless).

  Under OSX, there are two options:

  1. the file has the correct ' Creator/Type' metadata; and/or

  2. the file has the correct file extension.

  Historically, focused on the Macintosh OS used option #1 and software should not look at the actual file names. However, who soon became unfeasible when people tried to share files between Mac and (almost all) other systems. That lead to various tools to "attribute" Data Type/Creator of known file extensions, so they can be opened with the right software on Mac. Also the reverse that's happened; saving a file "without extension" on a Mac was not a problem, but to open it in Windows, you often had to add the right extension.

  So, somewhere around one or two versions of the system there, Apple has decided to return to the old, trust "File Extension." But OSX still records the Type/Creator metadata for files created on your Mac. Control of the 'type' should work then - but the problem is, what happens if you got your file also? The extension may be correct, but if she has any type of file, your script won't see it.

  Fortunately, the open a Mac OS x file dialogue box allows some pretty wicked customizations. Never forget a file filter, you can run a custom function which decides for each separate file and the folder should be adjustable or not. The function has access to all the file attributes. You can go up to check the name of the file and dismiss all files that contain a 'q', or the files are read-only, or that are smaller than 1 KB.

  Check out this piece of code (I wrote it myself, but various tips and tricks have been played on this same forum):

  if (File.fs == "Windows")
      pdfFile = Folder.myDocuments.openDlg( 'Load PDF document', "Adobe PDF:*.pdf,All files:*.*", false);
  else
      pdfFile = Folder.myDocuments.openDlg( 'Load PDF document', function(file) { return file instanceof Folder || (!(file.hidden) && (file.name.match(/\.pdf$/i) || file.type == "PDF ")); }, false );
  

  (I advise you to copy the fragment of Windows, just in case your script will ' world tour.)

• How to check the event.target type in the "if" statement

  Hi, I have "roll-over" event listener and I wish that only works with music videos (without textfields etc.). I would write something like this:

  if(Event.Target == MovieClip) {do something}

  else {do something}

  This does not work properly.

  How to check the event.target type in the "if"?

  Thanks for any help.

  :

  If (getQualifiedClassName (Event.Target) == 'flash. display::MovieClip') {do something}

  else {do something}

  .