HOWTO estimate of progress during the use of parallelism of the iteration?

Similar Questions

• Poor performance during the iteration/update rows of a tree table

  Hello
  
  We have a tree table based on a VO and EO (with transitional attributes). One of the attributes is an indicator.
  The original Version is filled with a complex query with several thousand lines.
  
  Now, when the user clicks on a node, all children are updated (their flag is set to true) recursively.
  
  It's really really slow. It may take several minutes, while a similar update via PL/SQL on a real table would take a few seconds.
  
  Is it possible to improve the performance? We have already applied all the tunings on EO as VO mentioned in the Oracle Documentation, but they had almost no effect:
  -keep the viewlink iterators set line
  -indicators of query
  -Use the batch update
  
  The algorithm we use is the following:
  

      private void checkTreeNodes(JUCtrlHierNodeBinding node, Boolean check) {
          if (node == null) {
              return;
          }
  
         TreeVORowImpl nodeRow = (TreeVORowImpl)node.getRow();
          if (nodeRow != null) {
                  nodeRow.setFlag(check);
          }
  
          List<JUCtrlHierNodeBinding> children = null;
          if (!nodeRow.getLevel().equals("4"))  // no more than 4 levels
              children = node.getChildren();
  
          if (children != null) {
              for (JUCtrlHierNodeBinding _node : children) {
                  checkTreeNodes(_node, check);
              }
          }
      }

  Hello

  try to move the logic of the definition of the transitional indicator at the service of the company (method exposed on the client interface) and then refresh the tree instead of a record thousand on the client component analysis.

  Frank

• I use the helper downloader (ver. 2.2) when you save a video of WWII, during the reading period, I get some equidistant points from the screen and Flash

  I use the helper downloader (ver. 2.2)
  When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download?

  [email protected]

  Which may be caused by a problem with the codec that is used by this video and who is not taken care of correctly.

  You can open this video in another video player to see if it works there?

  What kind of video is it?

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Use the phone activation, do not meet all the prompts until the opportunity to talk to a real person

• Error during the downloading of any software on the computer: you do not have the necessary permissions to use all the features of the program you are about to run. You can run this program...

  Original title: administrator password

  Hi, I'm Jays

  I am running a windows vista, dell computer operating and so I would like to download a software on it, he asks an administrator password. The problem is that I don't have an admin password.

  There is one account on this computer, and it is not password protected.

  The entire message says:

  You do not have the necessary permissions to use all the

  features of the program you are about to run. You can run this

  program under a different name or continue to run the program as the

  current user.

  [checkbox] Current user (Dell-Dell-PC)

  [checked] Run the program as the following:

  User name: administrator

  Password: [BLANK]

  If I click on the area of the current user, it will not let me continue

  as I don't know the password, it displays a message when enter is pressed.

  What's wrong?

  Hello

  1. don't you make changes on the computer before this problem?
  2. I would like to confirm if you have found this quick installation of programs or by downloading programs? If you get this fast downloading then which browser do you use?

  If get you this error message during the installation of a program and then try to run or install the program with administrator privileges.

  Steps to run the file with administrator privileges:

  1. right click on the executable file of the program and select run as administrator

• An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file. I use ipconfig /renew6.

  Hi all

  I use version 2.1 of WINPE. It works with ipv4 network services.

  I have a "Windows2008R2" machine in my network. In this server I am running a DHCPv6 server in my network. This server is the allocation of IPv6 addresses to all computers that have the OS Vista and Win7, etc (for vista and above).

  But I'm not able to receive the ipv6 address for winpe2.1 pc which is my test pc.

  What are the basic things I should do to receive the IPv6 ip address.

  If you please suggest me that how I can solve this problem.

  I tried to have run the command as "ipconfig /renew6" but he throwed an error

  An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file.

  It is very urgent for me. I ask if anyone knows the steps so that the WINPE2.1 system get IPV6 will be appreciated.

  Thank you very much.

  Andy

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in the community of Windows Server above with your questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Has conducted an assessment of WEI, and, the window according to the analysis is complete, but progress seems to be about 95% and wrote "this may take a few minutes. Your screen may blink during the process.

  Original title: WEI

  I recently did a full scan of the system with all the tools available and used windows manufacturer to scan the hard drive, HARD drive program. Everything is cleaned up and updated. I conducted an assessment of WEI, and the window said the analysis is complete, but advances seem to be about 95% and wrote "this could take a few minutes. Your screen may blink during the process. "It was about 20 minutes so far and the box on the bottom, said"Cancel ". I'm going to be it, but ask yourself what can be the issue. Any help/ideas would be appreciated.

  Yes, I think that he / she forgot to mail the scanner :)

  The link I posted has a Mr. fixit for me on this matter use you it?

  You can scan with mbam free :/

  https://www.Malwarebytes.org/antimalware/

• ID package already in use, an error has occurred during the recording of output ' 1.1.0"to the database.

  Hello

  I currently have an application called "Apa Doanya' (id 33020976) for BB 7 and below. Now, I created another version of it for BB10. To publish this version BB10, I created a new application named also "Apa Doanya' (id 46317888), download the file bar, but not yet to introduce the new application for review. Later, I changed my mind, I want to release this BB10 version under the name of my current application so that I can keep the sides and the current download figures. So in my application, I added a new version, download the folder bar and increment the version 1.1.0. But I got an error when recording on step 5, he said:

  Package already in use ID
  An error has occurred during the recording of output ' 1.1.0"to the database.

  I tried several times but no luck. What has caused this? Is - it because I already download the bar file to another application (id 46317888)? Just to be sure, I remove bar app 46317888 file and download a dummy cod file (so that the application can be saved). Then repeat the previous step (add a new version and so on) but I still have the same error.

  Really appreciate any help.

  -Hammemi - D

  Hi erik,
  Thanks for reminding me

  Yes, the problem is now RESOLVED. It was, I think, a bug/error on their part (support of the seller) so they erased the package id (I quote: "the package ID has been deleted.").

  Thank you very much :-)

• My computer fills up during the night with 50 GB of additional storage used. Why would he do that?

  I have a 500 GB hard drive. He "filled." 0 bytes left. I bought an extra external hard drive and have installed 250 GB on the new hard drive. I did NOT use the computer during the night. In the morning, the original hard drive was new. Why would he do that?

  I suggest you use a utility like the size of the folder to try to identify where the records are piling up.

  (for example I recently used it to track down a mystery space where it turns out the user contained a diagnostic trace activated accidentally in a safety program that created constant log files in a deeply nested subfolder.)

  Download it here.  With any freeware watch carefully for dishes bug prompts during installation.

  http://www.Mindgems.com/products/folder-size/folder-size-download.htm

  Also, I've seen some hard to find root kits that Norton probably would not find cause this problem. I suggest that you run these additional free tools-

  TDSS Killer
  http://support.Kaspersky.com/5353?El=88446

  By downloading and installing these be sure to get the free version. Say no
  for all offers free trial or the auto update during installation to keep the functional free version.

  Malwarebytes
  http://www.Malwarebytes.org/products/malwarebytes_free/

  SUPERAntiSpyware
  http://www.SUPERAntiSpyware.com/

• How to use several adf 12 shape and insert the form data in to table during the click on "submit" button

  How to use several adf 12 shape and insert the form data in to table during the click on "submit" button. Can we use several form from adf or not?

  Make sure that you dragged the VO based EO.

  Also make sure that the VO attributes based EO Updatable property.

  The query according to VO is used only to add LOV to the column of the original VO ModelId.

  See you soon

  AJ

• MISP track changes made to a digitized table used during the conversion?

  I need to convert several databases in AL32UTF8, which is 2 TB or so of size.  I want to reduce the outage window.  Most of the data is ASCII, but the character set is WE8ISO8859P15, so it is possible to get the non-ascii character in there.  My plan was to analyze the database while it is live, then run MISP during the blackout without a full re-analysis.  But I fear that a non-ascii character could go in there from scanning the failure.  The MISP track changes since the last scan, so just check the lines that have been added or changed since the scan?  In my tests limited until now, so it seems that complete analysis would take longer than the window of failure, a progressive solution would be wonderful.  However, I don't see how to make this happen.

  
  

  Thank you

  Mike has
  

  No, the CDS is not currently able to track incremental changes. However, you could try to categorize paintings like those who can get new non-ASCII characters and those who cannot. The fact that a given table has at least one non-ASCII character is a pretty good approximation of this classification. In this way, you could just rescan the tables which are likely to get new non-ASCII characters. Depending on the size of the problem tables this may shorten the time to restart the analysis considerably.

  Note that all need conversion CLOB columns, even if they contain ASCII only.

  To minimize the window of downtime, we recommend a solution with GoldenGate. GoldenGate is, however, not a free product.

  Thank you

  Sergiusz

• Use vCenter custom during the VRO flow specification

  My group and I are currently working on a compute cloud workflow where customers request a VM and it gets automatically configured using vRO/vRA.  We already have a specification in vCenter for Windows create the local administrator password and join the guest to the area.  We currently built in flow "Clone, with several network adapters and the Windows credential" for most working with hard-coded credentials.  What we have is either find a way to take the custom specification and enter the data that we need to place, or somehow apply the spec together personalised to the VM during the clone process.  I know means 2nd option, we need to go far from the built circulation to create our own, but if it's the only way then so be it.

  Any help would be appreciated,

  Thank you

  Hello

  It is possible to get a vCenter's existing customization specification and pass it to the customizeVM_Task() method, not sure if there is a workflow of library of ready-to-use for this.

  Check out these links for examples (they are "well aged" :-) but should still work in current versions):

  Need help to start with the cloning by specification of customization

  Deploy the model with customization

  and http://www.vcoportal.de/2011/04/customize-a-virtual-machine/

  customizationSpec

  I found it generally easier to use an object existing specification, and replacing just the settings I want to change a programming than to create a new suit from scratch. You might get some that mistakes a specified parameter was"not correct" back from vCenter, missing a few pieces of the specification.

  Make sure, for example, the number of network adapters configured for the virtual computer is the number of network adapter settings in the book loads.

  Could also contribute to Onyx: click through the process manually and get calls from code and the api necessary... Onyx for the Web Client

  Kind regards

  Joerg

• Not able to change the plan of the quality during the inspection of reception using the task of ACEM.

  Hi all

  I am not able to change the plan of the quality during the inspection of reception using the task of ACEM.

  Please suggest what to do on the priority.

  Thank you and best regards,

  Piyush Kudawalee

  Hello

  If you use functions much jump, then you must add a new plan of the quality in the settings of jumps.

  Please go to the root of quality > process lots Skip parameters > application process of Skip lot number attached to the elements > go to settings to jump > add plan new collection...

  This will show you the two quality LIMM and Oracle plans. You can add as many plans as you want and can restrict their in asigning to specific jump lot.

  The quality plan is failing because there can be only plan quality attached to jump a lot.

  NOTE: Please indicate the post as helpful or answered if the update has really helped you. This would also bring the wire to the logical conclusion and will be useful for viewers.

  Thank you

  GHG