Satellite A210-14 is not set the economy mode when I close energy

Similar Questions

• Satellite M70-159: how to set the APM mode on the HARD drive?

  Hello.
  I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
  I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
  How can I configure Mode APM?

  1.11 advanced Power Management (APM)

  The hard disk automatically switches to the mode according to energy saving the
  setting the APM mode under the inactive state.
  The APM mode can be selected with a number of sector register of ALL
  Control FEATURES (EF).
  The disk complies with the three types of modes of the APM which a command
  from the host is necessary.
  EN = 05 h: enable APM
  SC = C0h - FEh: Mode-0 Active Idle? Idle low power
  SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
  SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
  EN = 85 h: disable APM (Game Mode-0)
  Active Idle: The head is in a position of extreme inner disc
  Middle. (VCM Lock)
  Overview of the unit
  1-14-C141-E224
  Low power Idle: the head is unloaded the disc.
  The spindle motor.
  Standby: the motor stops.
  In Mode APM-1, which is the default APM mode, operational status moves until it
  Finally reached "low power idle."
  Table 1.7 Advanced Power Management
  APM mode
  Idle assets
  (VCM Lock)
  Idle low power
  (Unloading)
  Standby
  (Spin-off)
  Mode-0 0.2 to 1.2 s min. 15 s/o
  Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
  2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
  When was the maximum period during which the hard disk waiting for orders
  exceeded:
  Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
  Inactive power in 15 minutes.
  Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds.
  Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
  Low power idle mode goes into sleep mode.
  Note:
  The default values for these settings are reflected in the values of WORD 91 of the
  Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
  (the default) to power off.
  The above mentioned is time until the transition to each mode of power based on the point
  that the reader becomes a State of waiting for order.

  How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

  Where do I put? Please help me.

  Hello

  You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
  Here, you can change the settings for the APM mode.
  Unfortunately the other options to disable the APM Mode are not known to me.

• Satellite A210-248 does not recognize the 840 ECO mSATA SSD

  I want to build in my Satellite A210-248 on the port of msata ssd.

  When I build in the ssd bios dind't find the ssd, so I can't install windows in the ssd

  Hello

  Satellite A210 does not support port mSATA and therefore the mSATA SSD module cannot be used.
  Probably, you have found a mini-PCI on the motherboard slot. It certainly looks like mSATA but its not the same thing.

• Satellite C870 - 19L can not set the correct resolution

  I have a new laptop and my problem is that the maximum resolution that can be adjusted is 1366 x 768, although the screen has a resolution of 1600 x 900. The problem is, that only 80% of the desktop is displayed, the area to the right is not displayed.

  I couldn't find an .inf file in the download section.

  What can I do?

  In Notepad, specification is clearly written that your laptop comes with preinstalled Win8 64 bit and this preinstalled OS (recovery image) contains the right display driver. Default factory settings resolution must be set to the native display resolution.

  The question is: you use this original preinstalled operating system and if not what exactly do you do?

• I'm not setting the 'RADIUS' widgets when I create new forms.

  I'm NEW to Illustrator, but a user of long date PS.

  I just started trying to learn to use Illustrator.

  I use at the moment, on a Win7x64 CS6 machine.

  The first tutorial that I started watching showed the appearance of 'Ray widgets' in the corners of a new rectangle that allow to change the radius of the corners. Similar widgets seem to allow to change the number of sides in a polygon.

  Am I failing to implement properly?

  I use a version that doesn't do this?

  Is this something that only works in a MAC environment?

  Can someone take the time to let me know before I waste a lot of time, trying to do something that my other special/OS/or version... won't.

  Thank you

  JP

  CS6 didn't live corners.

• Satellite A210-16F - part number for the chassis need HARD drive

  Hello

  does anyone know what what is the * part number of hard drive for toshiba satellite A210-F16 chassis *.

  The model number is * PSAELE-01S009G3 *.
  I had a frame of HARD drive with a V00927210 part number that does not match this pattern.
  If anyone knows of a reference number or if it can display an image, at least, I would be very gratefull!

  Thank you!

  Hello

  I put t know what HARD drive chassis you re meaning precisely because the HARD drive in my A210 notebook can not find in any media
  It s just connected to the connectors in the HARD drive Bay.

  Anyway, if you need a few laptop parts (not looking at this as part it is) then I recommend you contact the ASP (certified partner) in your country in order to get a part for the Satellite A210 laptop model.

  See you soon

• Satellite A210 restore failed (error: run the Chkdsk utility)

  I have a Toshiba Satellite A210... When I tried to reform. There, an error came (about 47% in the 'process'); blablablabla... This file is corrupt, run Chkdsk utility...
  Help please?
  Then. Should I try call Toshiba or send it?

  Help me please, anyone? :))

  It's not easy to say what the problem is.

  On the Toshiba website, I founded a updated firmware for drives optical drives in Satellite A210.
  Then, look at the Toshiba site and try this update of the firmware if you have such a unit.

  The next step if you have no success with the update of the firmware, you should try a Microsoft installation disc.
  In addition, it could also be a problem with the HARD drive.
  You can do a test drive with Drive Fitness Test.

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.

• Can not set the print properties

  Just loaded FireFox 4.0.1
  When I click on
  file
  print
  and the print window opens if I click
  Properties to define the quality or black etc. only I get
  an error box that says:
  Error
  Prop Res DLL not loaded

  I tried exactly the same thing using Windows internet explore and the Word for windows, and these all are working
  perfectly. I can click Properties in the print window and
  the value of what I want on my printer.

  I rebooted and no help.

  I'm about to go back to the previous version of Firefox
  Since I print a lot of websites and I often
  you want to set the print mode project to save time and ink.

  Can you offer any suggestions other than coming back
  the earlier version?
  Thank you!
  KyDan
  Louisville KY

  This seems to be a problem for a long time with the Lexmark printers who has just started to happen in Firefox 4.

  An example
  
  http://forums.techarena.in/MS-Office-support/596409.htm

  This Google search.

  Check out this thread for support for a solution that has worked in 2006 for a similar problem with another Lexmark printer. I hope that something like this will work for you.

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• Satellite P - games do not recognize the graphics card

  Hello

  My Satellite does not recognize the GT540M Nvidia when I play a game, simply select the embedded (Intel HD Graphics Family). I have already installed the drivers of toshiba and the nvidia site Web site.

  What should I do?

  Hey Buddy,

  > nvidia Web site.
  I recommend you to install display drivers Toshiba that only they are pre-tested on your system. This could be the reason why games don t recognize your graphic card. Then please remove the nVidia and download the latest driver of Toshiba display.

  In addition, it would be interesting to know which laptop computer, the operating system and the games you have. Otherwise, it would be a never-ending story ;)

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• I have not set the date on the camera, how do I change the date on the picture

  I have not set the date on the camera, how do I change the date on the picture

  Thank you

  Maybe some help here: http://windows.microsoft.com/en-US/windows-vista/Change-the-date-and-time-a-picture-was-taken

• Windows could not set the offline locale information. Error code: 0x80FE0000

  Windows could not set the offline locale information. Error code: 0x80FE0000

  Handsome,

  Found that I got the same error (0x80fe0000) while trying to reinstall Windows Vista, Service Pack 1 on a Dell Inspiron 1545. Originally, the BSOD's happened and repair Windows has been in vain. Formatting the drive did not resolve the issue

  Replace the player has solved this problem for me. It seems that the disc has been/is damaged and would fail to resettlement.

  time of installation of $60 later and two hours and everything is fine.

  I hope this helps!

  DrMardo

• WARNING: could not set the limit of asynch I/O

  Each night database generation of trace with WARNING below
  Anyone know what this means?
  
  WARNING: could not set the limit asynch I/O to 252 for SQL direct I/O. It is set to 200
  
  
  Oracle Version: 11.1.0.7
  AIX 5.3

  This is the bug number, you must place it in the bugs database.
  Search for metalink notes is easy (as well that I mentioned) and then click bug.