HP 1018 - Installation of the driver - problem - uninstall (Windows 7 64-bit)

Similar Questions

• Got the drive HARD and Windows 7 64 bit

  I buy 500 secure HARD drive. I'm very nomadic and connect to any type of computer.

  My laptop is: Windows 7 64-bit
  At home, I have: Vista 32 bit
  On the site of the customer: any type of OS

  I'm not able to install the supplied software (biologin) in Windows 7. The error I'm getting refer to a bad digital signature.

  There is a driver for this OS?
  I can't find one in support & downloads.

  Have you noticed this problem on Win7 64-bit only?
  Have you checked Toshiba support page to download the software?
  Visit http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• After the installation of the driver software my windows 2008 Server gives a blue screen. How can I go bak to original configuration?

  I get a blue screen after installing the drivers for my TM-T88IV from the internet. So I now can't log on because of the blue screen.
  How to return to the original state.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Windows Server général assistnce more far.

• Installation of the XenAppWeb.msi for Windows Vista 32-bit file

  Need a valid file (XenAppWeb.msi) to install

  Hello

  Post the question in this forum:

  http://community.Citrix.com/

• Satellite M40: Question about the installation of the driver

  Dear Toshiba

  I have Toshiba Satellite M40, when I installed with win Xp recovery CD, I found everything is ok except the following:

  When I go to 'connection area action' and press 'install' botton to install client for netware... I have the following message:
  "unable to find the drivers for this device...". If you have a disk that contains the driver update or windows search click ok"

  Help, please
  Thank you

  Hello Mohamed

  It seems that your laptop is trying to install the network driver, but the operating system can find t he or you the driver source is false.
  In this case you must download from Toshiba Web site network driver and install it.

  Good bye

• Installation of the Sims 2 on Windows 7 stuck at 52%

  Original title: installation of the sims 2 on windows 7.

  Hiya me and my friend are both trying to install the sims 2 on 2 different laptops (both with Windows 7), but were both stuck, mines at 52% and he says that the current files is TSData/Res/Sound/Build.package and my friend to 49%. We are all both are on the second attempt.

  Can you help us because we wouldn't be able to play new games

  Hello

  You can copy the content of the game on your hard drive & then try to install the game.

  Step 1
  
  If you have the Sims 2 game CD, you can create a new folder on your drive hard by following this link.
  Create a new folder

  Step 2
  a. open the content of the game CD, copy & paste the content to the new folder.
       Copy and paste a file
  b. When finished, run the configuration file in the copied folder.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can use a vista re install the drive on a windows xp?

  You can use a vista re install the drive on a windows xp?

  No.............

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

• I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down. I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  EU the link below to download the ISO of Windows Vista. It's totally free.
  The site is Digital River. It is 100% legitimate. It is recognized and supported by Microsoft.

  The link also teach you how to burn the iso file on a bootable install DVD.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  Although it says Dell at the top of the page, it applies to both Dell or other than Dell.

  Make sure that you select the correct version of bit.

  x 86 32-bit version =

  x 64 = 64-bit version.

• I saw the problem with Windows Live Mail gel but I have the same problem with Windows Mail.

  I saw the problem posted on Windows Live Mail gel but I have the same problem with Windows Mail. Sometimes, while mouse refuses I can scroll vertically with the keyboard, but not always... I changed to another wireless mouse, and this has not changed. I run Vista and can't find the update, that you reference. The reopening and closing program usually fixes it, but it's annoying. It happened for about 6 weeks or so.

  Can anyone help?

  I run Vista and can't find the update, that you reference.

  What update WHO refers to?

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  And search for malware with the free version of this tool.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• Satellite A200-1AX - overheating of the graphics card in Windows 7 64 bit

  Hello.

  Model of my laptop Satellite A200-1AX possessing a Mobiliti Radeon 2600 video card.

  After installing Windows 7 64 bit can't find the correct work display driver.
  Fan does not work quickly, by the suite and heavy applications is overheating and the laptop is turned off.
  Not able to find a driver for Windows7 64 bit or Vista 64-bit for my card on the Toshiba site.

  The site of AMD.com a driver for Radeon 2XXX series:
  Windows 7-64 bit ATI Catalyst a? ¢ Display Driver Version: 9.9, Edition Release
  Date: 09/09/2009. -Drivers do not help.

  I tried to increase the fan speed you programs 'ATI Tray Tools', has not helped.

  Please help me with my problem. Sorry for my English

  Hello

  The drivers of Toshiba laptops are a bit different and not the same thing as the drivers from the manufacturer of the graphics card.
  The original ATI drivers are made for office use and not for mobile use. Drivers Toshiba takes supported thermal protection that allows to control the performance of gpu and the dissipation of the heat.
  If you want to use a page ATI driver then your GPU could create more heat as usual which leads to the unexpected shutdown.

  I installed Win 7 on my A210. I didn't install the driver of ATI graphics card because the Win 7 automatically recognizes the graphics chip.
  After installation, I went to the Device Manager. Then, I chose the graphics chip and looked for the driver automatically. Windows has found the right driver and installed this
  Since the unit works perfectly with Win 7

• 0x100000EA and other problems on Windows 7 (64 bit) on HP Pavilion dv6-1330 ep

  I got the blue screen a few times with this error report, tried to recovery through partition; that could not, end up having to start from the Cd to reinstall windows 7.

  The problem remains, even after installation of the drivers available on the HP page or via the wizard.

  I also tried F2 on startup and writes a check, he revealed no problem on the disk or memory.

  Published: also, this usaly occurs when opening gif´s

  Error message is:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 2070

  More information about the problem:
  BCCode: 100000ea
  BCP1: FFFFFA8007B03640
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Checked the inforamtion SYSTEMS and also got the following info:

  

  Edit: found the drivers Id: ACPI\HPQ0004 and ACPI\ENE0100.

  Problem still not fixed...

  Hello DM19,.

  Thank you for your reply and I hope you had a wonderful weekend!

  I understand that you did your installation on the Windows disc.  You now have all the drivers except the one that has a code 10 on it.

  Did you do all your updates to Windows, if only he can solve.

  Device Manager have you tried to just update the driver?

  Have you tried running MS difficulty ?

  Did you download and install the driver for your system and improvements to the operating system and software page QFE.

  If this has not resolved the driver problem, the page of software and the driver has a Manager option of recovery for you to download.

  I download it and follow the prompts.

  Once you complete this step, I would install all drivers of origin since the Recovery Manager

  Using Recovery Manager to restore the software and drivers (Windows 7)

  Now run the Wizard help HP to get the updates from HP.

  Good luck!

• device driver Bluetooth for windows 7 64-bit sony vaio

  Hello

  I need device driver bluetooth for windows 7 64 bit for sony vaio

  device driver Bluetooth for windows 7 64-bit sony vaio

  Please help me

  -Nicolas

  After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

  This is how to solve the "Bluetooth peripheral device is not a driver:
  I use the following materials in a dozen different tests:
  -Only for Broadcom based on USB from Belkin and Targus dongles
  -Windows 7 Professional 64-bit on four different computers
  -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
  -Bluetooth file transfer wasn't of interest, but I tested with two different phones
  This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
  -- -- --
  Step 1: Ignore 99% of you think that you have learned about this problem.
  It will be * probably * boil down to a missing COM port.
  Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
  (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
  Step 3: Stop looking for a driver for something called a "Bluetooth device device.
  There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
  -- -- --
  Unfortunately, most of the people reading this will have tried one or more of the following:
  1.) install this stupid Windows Mobile Device Center
  2.) install any number of drivers Bluetooth who-knows-what from who knows where
  (3.) running all kinds of utilities third driver
  4.), forcing several facilities from pilot to operate in Win98, XP or Vista
  5.) sacrificing countless animals
  The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
  -- -- --
  Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
  With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
  So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
  appeared during installation.
  1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
  2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
  .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
  (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
  (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
  4.) now attempt to pair the device of your choice
  .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
  5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
  6.) do not despair
  ! This happens the first time connect you a new Bluetooth device.
  7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
  8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
  9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
  Click on:
  a.) browse my computer for driver software
  (b) let me pick from a list of device on my computer drivers
  (c.) in the common hardware types list, select:
  --->>> Ports (COM & LPT)<>
  d.) d.) under manufacturer, select Microsoft
  e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
  f.) when you are prompted with the update driver warning, click 'yes '.
  g.) with joy to read the message that "Windows has updated the driver software.
  (h.) read for pleasure, and then click "close".
  (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
  10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
  -- -- --
  I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
  Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
  -- -- --
  Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
  I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
  I hope this saves people a lot of frustration.

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617