HP 15-AB031TX: upgrade the OS and recovery

Similar Questions

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

  Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

  What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

  Yes, this is why I suggested the part numbers.  You have to match pairs.

• I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  AM2 are listed here:

  http://support.HP.com/us-en/document/c00714578

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• Upgrade the processor and the memory of SX280

  Hello

  I have OptiPlex SX280 bought 3 years ago

  which has Intel Pentium 4 530 memory and 2 GB.

  Given that I need to solve a problem of Supercomputing,

  I want to upgrade the processor and the memory instead of replace the computer.

  SX280 works with CPU Core2Duo E8200 having the same type of brooch (LGA775)

  and 4GByte momory?

  The SX280 BIOS is A09.

  Hope to hear a response.

  Thanks in advance.

  Message edited by yongminc on 10/19/2008 21:18
  
  

• Database is underway after the restore and recovery

  Database is in the waiting state after the restore and recovery.
  The database cannot start today and it displays an error message: 2 log file can be archived. Then I run the following command:

  SQL> select group#, sequence#, bytes, members, status from v$log;
  
      GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
  ---------- ---------- ---------- ---------- ----------------
           1        452   52428800          1 CURRENT
           3        451   52428800          1 INACTIVE
           2        450   52428800          1 INACTIVE
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
  
  Database altered.
  
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
  
  Database altered.
  SQL> alter database open;
  
  Database altered.
  
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  566231040 bytes
  Fixed Size                  1220580 bytes
  Variable Size             125829148 bytes
  Database Buffers          432013312 bytes
  Redo Buffers                7168000 bytes
  Database mounted.
  Database opened.

  But when I try to log on by using the EM console, it shows that the database is not open. Then I restore and recover the database by using the EM Console. But the database and then enter in pending status.
  What to do next?

  Stop the console 'EM, and then restart it. I hope all is well.

• WLC4402 - Questions to upgrade the AP and controller

  Hello

  I just upgraded an AIR-WLC4402-12-K9 to version 7.0.98.0 of the software, and I have a few questions-

  1. I have no APs to connect yet but when I do I'll have to check what software they run and perhaps demote the controller to get access up to v7 points?  To join the WLC v7 since v3.2 I had to make a few intermediate upgrades and I wonder if I have been a little premature and should have done updates after the APs have been associated, has new software pushed from the controller and then performed the steps in upgrade of WLC so the WLC and APs were synchronized in terms of software.

  2 - the memory usage is sitting at 60% with no associated APs.  I have just connected 4402-12 running 5.1.151.0 and he's sitting at 33% use of memory with associated access 11 points.  Have I spent in a too recent version for this controller?  What is a figure of the memory use of a 4402?

  Thanks in advance,

  Jason.

  Jason,

  A question.  You should be fine.  When the AP detects the WLC, it will do a code audit.  If this isn't the right code, it can extract the correct image of the WLC.  As long as the AP you are supported in 7.0, the recovery on the access point image won't matter.

  For question 2.  sounds of 60% of normal for 7.0, depending on the amount of memory is on the device itself.  I woulnd't ' t be too concerned about the memory usage until you points upward in the high 80 years.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• My iphone 6 pirate last year and I got two steps.  The hacker has changed the password and recovery key, and apple won't give me access to my itunes that has more than 2000 songs I paid a healthy price.  Help, please

  How can I access my itunes?  Last year my iphone 6 has been hacked and they took my apple ID all my emails and accounts as well as itunes.  Apple.  After a lot of stress, anger and begging has replaced all 3 of my iPhone.  However they refused to give me access to my itunes back!  which is what I want most.  More than 2000 songs of hard earned money are in my itunes and since I had stage 2 Audit not one * thing I could do.  I had over the phone.  and the pirates had changed the password and got a new recovery key!  I want my music thas it.  I've lost thousands of photos that when, in the cloud and that's life, but I paid a lot of money for these precious tunes I want them!  Can anyone help?

  Just provide evidence that the account is to you they probably asked.

• Satellite A500 - upgrade the processor and RAM void my warranty?

  I have a Toshiba Satellite A500, and I think to upgrade my processor CPU and RAM. If I open it invalidate or do I need a Toshiba authority to open it? Removes the card RAM will void the warranty?

  All I need to know is that can I put RAM and CPU processor without voiding the warranty

  Hey,.

  If you upgrade the CPU, you will cancel the warranty because this upgrade is not supported from Toshiba.
  In addition, I put t understand why you buy a laptop, and then you think of some hardware upgrades. In your case, I'd rather bought a laptop with faster processor and more RAM.

  See also this article from Toshiba:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://APS2.Toshiba-tro.de/KB0/TSB9401AX0001R01.htm]

  Finally and above all a RAM upgrade is not a problem. So check your user manual how to do this.

• Satellite 2800-200; is it possible to upgrade the memory and HARD drive capacity

  Hi all

  my computer is a Toshiba Satellite S2800-200 (old) and I wont to ask if it is possible to upgrade memory capacity and disk.

  Thank you

  Of course you can upgrade these laptop parts.
  The laptop seems to be equipped with an internal memory which is not removable.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7168&ft=m&St=3
  According to the website above, you can use only one memory for an upgrade slot.
  You can use the 144-Pin PC100 SODIMM 128 MB module. It's max.

  I m not 100% sure on the HARD drive, but as I m not trunk not the laptop came with 10 GB HARD drive. Generally, a 20 GB HARD drive should be possible.

  Good bye

• Satellite L655 - 14 d - upgrade the RAM and sound card

  I have the Satellite L655 - 14 d there 3 GB RAM, I would like to know if I can upgrade the RAM if yes how? I would also like to know if I can add a card his 5.1 or 7.1 internally or externally without problem.

  Help, please

  Hello

  Sound chip is part of the mobo. Impossible to upgrade this or replace this part.
  You can use an external sound card, but I put t know how it will work in your laptop.

  Regarding the upgrade of RAM;
  Yes, you can upgrade the RAM.
  Check the user manual and extra, you can consult this section of the forum:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=114

• Drive hard new for the car and recovery

  Hello

  I have a Pavilion dv4-2141nr S/N: [personal information deleted]. I installed a new model of disc hard WD WDBMYH0010BNC-NSPS, + 2.5 - inch SATA 3 Gb/s. I set the BIOS to start fron DVD/CD and it appears "no boot device - insert boot disk and press a key" on the screen. I tried to reset the hard drive several times and it always comes to the top. What I am doing wrong?

  Sorry, that didn't work.

  It could be a bad set of recovery discs, a bad DVD player, who knows?

  But there a sure fire way to know, if you're in the game.

  Make your own bootable installation of W7 Home Premium DVD.

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can use the support that you have installed windows (assuming that the set of recovery disks is bad).

  http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO Windows 7 Home Premium x 64 English

  Make sure you get the entire file to download.  Occasionally he sometimes displays a full download, but you don't have the file xx GB 3. integers download.

  Then use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.  This tool will also make a bootable media.

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you can boot from the DVD drive (assuming you make the DVD) so you can contact HP and ask to have your money back, or make another set of recovery discs you sent.

  If you cannot start from ther DVD once again, there is a hardware problem any.

  Try to put the ISO file on a 4 GB USB flash drive and if you can boot from that and install Windows, then you know that there is some sort of problem with the hardware with the DVD player.

• How to upgrade the system of recovery?

  First of all, I am a new user, not sure this is the right place for my question, if negative, I'm sorry then.

  It is:
  I received an alert this afternoon (time British), asked me undate recovery system (im using window7 64 bit).

  But im a pc hand very green, any expert user here can tell me how to do the following step by step:
  1 unzip the file downloaded on my hard drive.
  2. switch to the download folder and double-click the up.exe game to start the installation.

  While downloading, "you need to install this software on 64-bit Windows 7" shown!

  What should I do and how to do?

  Thank you guys very very well and your kind assistance.

  Hi mate

  I think everything has already been said.
  You must store the package to update the HARD disk; for example on C:\
  You will need to decompress the package because the folders with all files are compressed.
  To decompress the package, you can use WinRAR. It is a free tool and can be downloaded on the internet. Google simply.

  After you have unpacked the downloaded package, you must go to the place where the files were unpacked and there you have to choose .exe file. Above all it s setup.exe
  After installation, you will need to restart the device and that s it

  But note; These alerts are only a notification and no recommendation!
  Then, if your system is working properly, you n don't need to update anything.

• HP Envy m6 1125dx: how to upgrade the bios and uefi without a hard drive

  I can't install OS, including Windows 8.1 discs. After that I get so far along, installing Windows says there is no hard drive, but it's there!

  I see that my BIOS is outdated. When I download the new BIOS from hp.com, I get an executable file

  which of course does not work on a computer that does not start. I can't find the bios file when I run

  the executable file on another laptop.

  So, I want to update bios and uefi to see if that helps with my problem.

  The current Bios is F.11

  Fred

  oakman2 wrote:

  SP66782.exe is what I get when I download from the HP web site. It is a windows executable that updates the

  The BIOS on the computer that runs it.

  I don't think it will run without windows is also running.

  Quite true.

  See the image below.

  What is necessary to do is to extract the sp66782.exe file to a folder on the second computer.

  Rename A 018, 4. FD file to 018 has 4. BIN and save it to the root of the USB stick.

  Plug the key into a port on the computer laptop problem.

  Press the power button / stop the laptop and immediately press and hold the Windows key and the B key until the phone reacts and starts the BIOS recovery.

  If all goes well, that will recover the BIOS corrupted with the new copy which is on the flash drive.

  There is a detailed description of another method to do this on the thread of the forum according to 3rd party.

  https://www.BIOS-mods.com/forum/thread-success-solved-semi-bricked-a-HP-DV6-3225dx

  Using this method will result in certain risks that you have to accept if you decide to follow this way to unbrick your laptop. Any update of the BIOS manually is risky.