HP 15-d030se. computer laptop 15:15 - computer d030se 15 hp laptop not dΘmarre at all.

Similar Questions

• Laptop not dΘmarre - please help!

  Hello

  First of all sorry for my English

  I have a laptop DV6541ev and since yesterday it won't turn.

  When I press the button power lights light up for less than one second, and then the computer turns off.

  Turns on the power indicator when the power cord is connected to the laptop.

  I tried the hard reset, remove insert ram but nothing happened.

  Unfortunately, my battery is 'dead' for a long time and I can't check if I can turn it on only the battery.

  With the inserted battery the laptop powers for a little more and then the power led on the front of the pc flashes constantly, and which means insufficient power, cause my battery died.

  Also in the past, the power adapter lose contact with the laptop and I had to escape the cord until the contact is stable.

  Could be a motherboard problem or a problem with the Ac Dc Jack?

  Please help me

  Thanks in advance

  A pc technician checked my laptop... and he said that the motherboard is burned up/bad.

  I confirmed that too many others.

  I Don t go to replace it cause it s not worth the monay.

  I m going to buy a new laptop and sorry, it s not going to be an HP.

• Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new l

  Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new laptop.

  Make sure you use the correct serial number.  Quickly find your serial number

  If you do not disable the original installation, then it is possible that your two activations permits were used, and you need to reset your counter to activate.  For this you must contact the Adobe Support via chat and ask them to reset your activations.  If you ask for more than that they will tell you that they cannot offer you any support.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Computer doesn't recognize is not the readers

  Hello!

  So my girlfriends mid 2009 stock 13 '' MacBook Pro HD went crap and I bought a new. It is a Seagate 1 TB hybrid SSD and its a HD approved Seagate and is 100% compatible with the computer. In any case, I got the drive and installed. I have a bootable USB key with OS X El Capitan on it and proceeded to install a new OS on the drive, but about 5 minutes in the installation has failed and asked to restart or shut down and try again (it was also showing the log files).

  I rebooted and held down the option key to display the bootable disks and now nothing appears. I tried to use different external drives, tried to use even the recovery of the internet, different USB ports and nothing works - he plays just the startup sound and a white screen blank forever, until I press the power button to switch it again 10 minutes or later. This continues to be! I have a feeling that the motherboard has gone to sh * but I wanted to post on here to see if anyone had any ideas? I talked to AppleCare and they have nothing in addition to sending the computer in which I do not for the moment.

  I recently reset SMC, NVRAM, started in safe mode, etc all before I ordered and installed the new drive. Should I do it again just to make sure this isn't one of those issues?

  Also forgot to mention that when I installed the new HD, I was able to format of OS X journaled extended, then proceeded to install the new OS.

  Also sometimes the computer actually shows the Apple logo at startup and a status bar (before I select a boot drive) 3 minutes later this black-bordered code (which spans the top of the screen down) appears on the left side of the screen, and then the computer restarts again. -So who plays a role any in everything that's wrong with her.

  Thanks in advance!

  Josh

  Use the diskettes provided with the MBP original Leopard installation.  Your El Capitan USB Installer is maybe damaged.

  If possible, try to install El Capitan with another Mac.

  The Seagate 1 TB SSHD is certainly compatible because I had installed in my MBP.

  Ciao.

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp

  Hello

  I have Windows server 2003 I have the server license terminal server, but one of my XP machine, which I'm calling his error remote desktop by giving as below
  The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp.

  Thank you
  Deepak Labonté.

  Hello annelabonnote

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted.

  My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted. Did this happen when I had an update Windows online? Or a security update? How can I repair quickly and get back in the business? These drives came with my Dell Pentium 4 computer and are not external drives, by the way. And how can I keep it doesn't happen?

  Hello old gal,

  Thank you for your message.  Please visit the following link, there is a fix - it tool that should solve your problem.
  http://support.Microsoft.com/kb/314060/en-us/
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• My computer is runing but sends not the power of the moniter the mouse or the keyboard. What could be?

  Original title: does not!

  my computer is runing but sends not the power of the moniter the mouse or the keyboard. What could be?

  Hello

  These details are pointing to it is not material.

  If under warranty, I suggest you contact the manufacturer; or if not under warranty get it to a repair shop local and good.

  See you soon...

• I'm not able to open all the documents, computer says that WIN32 ERRORS won't let me open.

  I'M NOT ABLE TO OPEN DOCUMENTS. COMPUTER SAYS WIN32 LET ME NOT OPEN.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  Please quote the exact text of the error message. Do not paraphrase. Where are the documents? Please give the full path; that is C:\Users\your-username\Documents. What version of Vista are you running? The files are only one type of file; for example, Word documents? If Yes, which version of Word you?

  More details, you can answer on your system and the problem, the more focused, as you can get. MS - MVP - Elephant Boy computers - don't panic!

• Antimalware doctor has taken over my computer it wont let me not uninstall what I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: antimalware doctor has taken over my computer it wont let me not uninstall what I do?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to remove Antimalware Doctor (uninstall instructions)

  http://www.myantispyware.com/2010/02/20/how-to-remove-antimalware-doctor-uninstall-instructions/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think