HP 255 G3 Notebook PC: Controller USB 28 error Code

Similar Questions

• HP 15-r033tx Notebook PC: get the 0xC0000005 error code during installation windows 8.1 x 64

  Please help me...

  I get error 0xC0000005 new installation code copy Windows 8.1 x 64

  When the installation process happens to 87% every time I get an error code saying that the installation is not possible.

  I can't install windows 8.1 x 64 version on my laptop.

  Please tell me how to fix and install windows 8.1 x 64 version on my laptop.

  I tried with dvd - rom and usb as well, but the result is the same... just stuck to 87%...can may not be installed...

  How to overcome it... Please...

  @Achintya only,

  Given that the material all past, and he could install another version of windows without problem, I suspect a problem with the 8.1 Windows installation disc x 64. IT may be a good idea to contact Microsoft about this.

  I did a little research and found this on the equivalent of Microsoft of this Council.

  Install Windows Pro 8.1 (detail) fails in step 2 with the error Code: 0xC0000005 -answers.microsoft.com

  There are a few suggestions on this post you can try.

  I hope this helps.

• Ports USB 19 error code

  USB ports not working and having an error code 19.  New driver download does not help...

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You would remove all instances of problem hubs and devices, then restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Camcorder to one of the ports usb gives error code 43

  Original title: when I try to connect my camcorder to one of my usb ports it gives me an error code 43? How can I solve this
  I'm trying to connect my camcorder Panasonic HDC - HS250 HD for my dell inspiron with windows 7. It comes up with an error code 43?  How can I connect my camcorder?

  Hello

  1. don't you make changes on the computer before the show?
  2 is the issue limited to camcorder Panasonic HDC - HS250 HD?

  Error code 43 is an error in Device Manager which means the following:
  Windows has stopped this device because it has reported problems. (Code 43)

  Method 1:
  You can try the steps in the link and check.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  
  Method 2:
  You can update the drivers for the device on the manufacturer's Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference links:
  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

• Broadcom 440 x 10/100 integrated controller Gets the error code 22 in Vista

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 22. What is the solution?

  Hello

  The error code indicates that the device is disabled.

  The solution to this problem is to enable the device in Device Manager.

  I suggest you open Device Manager.

  To open the Device Manger refer to the link below

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Device-Manager

  (a) once you open device manager scroll down and look for network adapter

  (b) click network adapter and expand the list.

  (c) right click on the Broadcom 440 x 10/100 integrated controller and Select enable

  (d) restart the system and check if the problem persists.

• Renesas/SIIG USB Installer error Code 10 3.0 host adapter

  Windows 7 Edition Home Premium. USB 3.0 card installed, but get error Code 10 when the system tries to install the drivers

  Please check the answer.

• BlueScreen: usb bug error code

  Hello

  I get random bluescreen that occur with errors USB_BUG_CODE.  I dug it in Event Viewer:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: fe
  BCP1: 0000000000000005
  BCP2: FFFFFA800FCE51A0
  BCP3: 0000000080863B3C
  BCP4: FFFFFA800FA5CC50
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000fe (0xfffffa800fce51a0, 0x0000000080863b3c, 0 x 0000000000000005, 0xfffffa800fa5cc50). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 010411-20919-01.

  Anyone know if it's a software or a hardware error?  If anyone knows how to give a sense of the dump files that would be great - thanks

  JEM

  Motherboard: with controller DP55SB intel core i7 870, Marvel

  Hello

  Are you overclocking? If so you should stop doing that until these issues are resolved.

  Results verified with BlueScreenView DumpCHK and WinDBG.

  Be sure and check these KB articles and other methods in solving the problems.

  All the Bug + controls were FE.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Size of the dump file	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Full Path	Number of processors	Major version	Minor version
  010611-22058 - 01.dmp	2011-01-06 12:34:26 AM	343 544	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fc901a0	00000000' 80863b3c	fffffa80'106e7c50	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010611-22058-01.dmp	8	15	7600
  010411-20919 - 01.dmp	04/01/2011 16:30:14	343 360	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fce51a0	00000000' 80863b3c	fffffa80'0fa5cc50	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010411-20919-01.dmp	8	15	7600
  010411-19500 - 01.dmp	2011-01-04 01:44:23	343 576	BUGCODE_USB_DRIVER	0x000000FE	00000000'00000005	fffffa80'0fd181a0	00000000' 80863b3c	fffffa80'10b498e0	USBPORT. SYS	USBPORT. SYS + 2de4e	Driver Port USB 1.1 & 2.0	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6002.18005 (lh_sp2rtm.090410 - 1830)	x 64		C:\Windows\Minidump\010411-19500-01.dmp	8	15	7600

  The CAUSE of all three was usbehci.sys which is a component of Windows that means something
  otherwise it led into error.

  One of the minidumps involves nvlddmkm.sys which is part of the Nvidia video/display driver.
  This could have a roll in the 3 so I would look for updated driver Nvidia if yours is 8/10.
  2010. There may be more recent and specific driver could have problems. Check with support from Nvidia,
  their drivers and ask in their forums known issues.

  1. BIOS update, low and other chipset drivers drivers available from Intel for the DP55SB.

  2 update drivers for Nvidia display/video and ask their forums and support for known issues.

  3 speedfan.sys on the system version is very old (2006) so I want to uninstall it.

  4 are looking for an update of ALSysIO64.sys which is part of CoolIt - I don't know if it's a
  an integral part of the installation you have - liquid cooling - however if not I would like to uninstall - if your
  the installer it needs and then look for updates and check with their support for known problems.

  5. check the updates for the Thor Marvell SATA/IDE controller if available (via Intel).

  =====================

  Intel DP55SB
  http://www.Intel.com/products/desktop/motherboards/DP55SB/DP55SB-overview.htm

  Intel® Desktop Board DP55SB - tools and software
  http://www.Intel.com/products/desktop/motherboards/DP55SB/DP55SB-tools.htm

  Update BIOS - 16/11/2010
  http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+5+Series+Chipset+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+DP55SB&OSVersion=OS+Independent

  Driver updates - check to see if you need a
  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=desktop+boards&ProductLine=Intel%C2%AE+5+series+chipset+boards&ProductProduct=Intel%C2%AE+Desktop+Board+DP55SB

  ---------------

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ---------------

  CoolIt Systems
  http://www.coolitsystems.com/

  ---------------

  Refer to the previous problems.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• device USB 43 error code

  Ive got a didital nine unused usb just lost the manual photo frame, ive plugged into my laptop and windows tells me there is a problem with it (code 43) what is the code 43 and what can I do to use my unit ive tried updating drivers and it still says theres an error please help! Thank you

  Hi Paulwhitaker,

  You can read the following article and try to run the fixit of material.

  Hardware devices do not work or are not detected in Windows

  For more information, you can consult the following article:

  Code 43: Windows has stopped this device because it has reported problems

  Hope this information is useful.

• My ports USB 37 error code

  They worked and now they are no - thought it was a printer problem, but the computer does not recognize the USB.  I have uninstalled and rebooted several times, I've unplugged, turned off, pulled the battery, tried to re - install updates & can't get something to work.  I need my printer & USB.  What is a computer these days without USB.  Also add problems with my Player CD/DVD but that fixed with the upper filter, lower dismantling the filter & hoped that would solve the USB issue but has no

  Hello

  Check in Settings/Setup (BIOS/CMOS) often F2 when you start then look at the screen and make sure that
  that USB is enabled. This problem could be material and a real computer store (no leeks and)
  glances at a BestBuy or other BigBox stores) or system manufacturer support is necessary.

  ------------------------

  Windows cannot initialize the device of this hardware driver. (Code 37)

  The driver returned error in its DriverEntry routine. Uninstall the driver and then click on scan
  for the hardware changes reinstall or upgrade the driver.

  On the General properties of the device tab, click on troubleshoot

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Serial com port USB displays error code 10

  When I did a check up on my computer (Windows 7 OS) this morning he said my serial port USB COM 3 would not start and had a code 10.  I went to the Device Manager and checked, and it says the same thing.  I clicked on update of drivers and it said that I had updated the drivers.  I plugged the USB things in the USB port and it worked fine.  I went to Device Manager and it still has the yellow mark with code 10.  How can I correct something that seems to work correctly?

  Thank you

  Shirley

  Hello

  1. did you restart the computer after uninstalling the USB device?

  I suggest to restart the computer and let Windows install the drivers automatically, or you can use the link below.

  Update drivers: recommended links

   

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this helps and keep us posted.

• Ethernet, controller USB controller and SM Bus controller drivers required for windows 7 64

  HI, I recently switched to my windows notebook 8 for windows 7 and now the following hardware drivers are not found:

  Ethernet controller

  SM Bus controller

  Controller USB Universal Serial bus

  Do anyone know how I can find the drivers for these items on Windows 7, I have no desier to return to windows 8?  I have a laptop HP PC 15-e073ca.

  Thanks for your help.

  Or try a different USB Intel:

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56164.exe

• Where can I buy this Toshiba Notebook Docking Station/USB hub?

  Where can I buy this product in the Denmark or in an online store at the Denmark/Europa?

  * Toshiba Notebook Docking Station/USB hub *.

  Product link: http://www.ubergizmo.com/15/archives/2006/07/toshiba_notebook_docking_stationusb_hub.html

  Thank you.

  Danish:

  Kuhu kan jeg kobe ovenstaende USB Docking med 5.1 Dolby Digital? I Danmark/Europa online store?

  Tak

  You will find this Option on ebay or many other online shops. Just look for the Toshiba PA3390E or PA3390E-1MPM partnumber with google or eBay.
  I hope this will help you.
  CU

• HP 15-be005TU: network controller, USB controller, no driver not found BCM43142A0.

  Bought a new laptop HP 15-be005TU. :=) Installed Windows 7 Ultimate (64 bit).

  Unable to connect to the network. No Wifi, Lan.

  After a few trials including finding Network Controller, controller USB and BCM43142A0 "No. Drivers."

  Help, please.

  Roland DS

  Hello:

  You need these drivers...

  WiFi:

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  Bluetooth:

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72617.exe

  Ethernet:

  This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74233.exe

  USB:

  This package contains the controller driver eXtensible host of Intel USB 3.0 for some laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74851.exe

• Satellite P10: Controller USB and IEEE 1394 do not work after WXP re - install

  Does anyone know how to fix this problem?

  I recently reinstalled WXP home on my satellite p10 computer laptop and then installed all drivers and utilities from the support CD that follows with Notepad.

  Everything works except for USB and Firewire.
  Very strange screen system shows me that I have bad driver for usb controller, but when I run the utility chipset problem remains. I even downloaded the drivers on the Toshiba support home page in the hope that it would be a different version and they would work, but nada... same problem persists.

  Someone knows how to solve this problem, or what is suitable driver for the controller USB on satellite p10 554 and where can I find this driver (without the entire chipset utility?)

  Thank you in advance for your help!
  David

  Hello

  the funny thing is that USB is IN the chipset. The problem is that you can extract some drivers you need, given that utilities chipset intel are a complete set.

  So, I suggest you go to the website of intel (www.intel.com) and then download the chipset utility. Don t forget to update your windows (Service pack, updates, bugfixes) because the operating system has sometimes problems with the hardware installed, then an update will solve this...

  I hope that you have little luck with the original software of the chipset intel.
  Give a few comments after completing the makings and let us know if it worked.

  Good bye

• Pavilion 15: Device drivers HP PAVILION 15 E7G15EA #ACB Network Controller/USB controller/Unkown

  My operating system has been reinstalled (Windows 7 ultimate, 64-bit) and I downloaded the drivers from HP Support - software downloads and the driver. I think everything worked more or less (the wifi has been constantly yellow keyboard until I downloaded the drivers and the laptop finally started to identify the ethernet cables). Note may not always detect the wifi, I use another laptop that is currently using the wifi, but flag does not detect anything. In my device manager there are symbols of yellow exclamation mark under Network Controller, USB controller and unknown device. Here is the hardware ID:

  NETWORK CONTROLLER

  PCI\VEN\_1814 & DEV_3290 & SUBSYS_18EC103 & REV_00

  PCI\VEN\_1814 & DEV_3290 & SUBSYS_18EC103

  PCI\VEN\_1814 & DEV_3290 & CC_028000

  PCI\VEN\_1814 & DEV_3290 & CC_0280

  USB CONTROLLER

  PCI\VEN\_8086 & DEV_9C31 & SUBSYS_2166103C & REV04

  PCI\VEN\_8086 & DEV_9C31 & SUBSYS_2166103C

  PCI\VEN\_8086 & DEV_9C31 & CC_0C0330

  PCI\VEN\_8086 & DEV_9C31 & CC_0C03

  UNKNOW DEVICE

  * HPQ6007

  Help, please

  You are the very welcome.

  Try this bluetooth driver instead.