HP 3520: HP 3520 while a printer print BLACK No.

Similar Questions

• Re: HP Deskjet 3520 - will not print black text

  Re: HP Deskjet 3520 - will not print black text

  so frustrating piece [language edited by moderator]

  Hi @Jaaanosik

  Please use the following document to solve the problem. Printer cannot print black ink or color ink, or prints blank Pages.

  If the problem persists, I would call you HP regardless of your warranty status. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP 3520 will not print black

  I have a HP 3520 which do not print black.  I tried all the solutions that HP has provided, I have changed all the toner cartridges and have new HP cartridges installed, but all 3 colors of fine print, but does not at all black ink print.

  Bought it is - 13 month so warranty HP is upward.

  Next steps other than buying a new printer?

  Thank you

  Hi taxtime.

  They call you able to contact HP support? If so, what was the result? If this isn't the case, please give them a call and let me know how it goes. Thank you.

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• HP Deskjet 3520 - will not print black text

  I have a Deskjet 3520 printer.  I installed a new HP ink cartridges, color printing works fine, but the black does not print.  Even if I force black only in the preferences to print gray nothing comes out.  The print head moves back and looks like it's printing, but the page is empty.  I also ran the cycle of cleaning heads.

  Help, please!

  Cheers, Ben

  Hi all

  My question seems to get fixed after I ran a printer 'clean' options available.

  If you guys have this problem, why not try to clean?

  Concerning

  MY YEO

• HP Deskjet 3520: My HP Deskjet 3520 won't print black after replacing the cartridge

  I just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless).  It prints fine colour, but not black.  I tried to clean the print head, align the cartridges, check the intake on the cartridges.  I have also just opened another black cartridge, thinking maybe my new was defective.  So now, I've just lost a cartridge.

  so frustrated! My printer is more than a year now.  So not guaranteed.  When I click on the printer ink levels, he is grateful I have full cartridges - but is not printing in black at all.

  FYI, never heard of anyone in case HP. himself seems to have resolved the day after. Now my black ink cartridge works.

• HP 3520: HP 3520 not printing black ink not

  My HP deskjet 3520 is not printing black even if the cartridge is new.  I have tried the cleaning tool print head, printer and on again, the re-sitting the cartridge, checked the vent, a partial reset of the printer, the resettled drivers.  Now, I'm just stressed!  Any thing left to try before tightening this printer and double pack of nine black cartridges?  Any help much appreciated.

  The message here is a troubleshooting document links to the Deskjet 3520.  If the steps it do not solve the problem, please contact HP Support, even if the printer is longer under warranty.  The Canada or the United States, call 1-800-HPINVENt, also see the document here to get our contact information.  If the foregoing is not satisfactory results so thanks for posting here.

• DeskJet 3520 not printing black

  With all the posts on the 3520 does not print black, why is not able to find a SOLUTION from HP?

  The PATCH should not be I'm going to buy a new printer.  I already have 3520 ink that I know what to do with... especially BLACK.

  If the printer needs to be reminded, remember!  I realize that I bought a printer $ 89... However, it should work the way it was intended... flawless......

  @TWBond007

  Sorry to hear about this, I can please advise that you call the Support team you may require a replacement...

  Phone numbers

  http:// Welcome.HP.com/country/US/en/wwcontact_us.html

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

• HP Deskjet Ink Advantage 3525: HP Deskjet 3525 not print black, but print [Black] symbols!

  Hello.

  I have HP Deskjet Ink Advantage 3525 e-all-in-one printer.

  The printer stop printing in black.

  I am trying:

  1. put the new cartridge HP 655 black original .

  2. I do several head cleaning cycles.

  3. I gave for printer.

  4. I remove the cartridges, turn the printer off, swith on the power cable, wait for mo to 60 seconds and plug everything back.

  5. I clean the vents and the surface of the black cartridge.

  6. I do everything, what I see in the paper by HP - Printers - HP Deskjet 3520, color or black ink not print

  And all of this does not help. My HP 3525 does not print black.

  Moreover, if I print a test page for the printer, I see racks, which are printed in black!

  At the same time, the black level is not printed!

  Please, help to repair!

  Hi @MobileWanted,

  The printer is probably using composite black. A mixture of the color cartridges will create black.

  The print head is probably clogged. This model has a permanent print head. Not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest you only do this if the printer is out of warranty: How to fix a HP printer, printing black ink not.

  If the printer is still under warranty, please call for a replacement printer.

  Thank you!

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf