HP 3650: Has no filter HP 3650

Similar Questions

• When I installed firefox I lost all info of 'Favorites' that has no filter and I can't find the latest browser. Find out all the this info?

  When I installed firefox I didn't that I loose access to information of 'Favorites' that was on my old browser from microsoft. I got info really important that I can't see how to get now.

  See https://support.mozilla.org/kb/import-favorites-from-internet-explorer

• Wlhich is the last Photoshop that has the oil paint filter?

  Who is the most recent Photoshop that has the filter of the oil it painting?  What is CS6?   or CC?

  Is there a substitute that is known for the oil paint filter?

  Thank you! Now, I try to install the CC.  I appreciate it!

• Is it possible to filter design on FPGA reconfigurable on the fly?

  Hello world

  I wonder if it is possible to design multi-channel filters on the FPGA reconfigurable on the fly? For example, it is possible to have X bandpass filters in an iteration, and Bandpass Filters Y with different specifications in the iteration following without having to recompile the FPGA code? Is there a simple way to achieve such a purpose?

  I have built such flexibility in the OTR (where each iteration has different filter settings) but hope to implement on the FPGA so.

  If someone could provide ideas as to whether or not such a conception is possible, it would be greatly appreciated.

  Thank you in advance for your help!

  Steven

  Hi Steven,

  How do you try to generate the FPGA code for this filter, you are using the IP generator?

  If so, this knowledge base article describes fixing the coefficients for multichannel to change on the fly filters.  There is also a nice example in there also.

  Also, if you use this IP generator, this help document describes the more Options box that has the ability to change the coefficients to be 'rechargeable' so that you can change these on the fly it too.

• Constraint between 2 filters (nested filter)

  Hello!

  I have a special request from the customer

  I have a dashboard that contains a main filter, that filter the field "name of the office. All views in the dashboard affected by this filter.

  For a point of view that I have to choose a secondary filter that "Choice list values" is what the main filter selected.

  For example: in the main filter, I chose office1-4 (from 10 offices)

  In the secondary filter, I want to get a list of values that contains Office1-4 with this list, I will choose only the Office1-2.

  I tried to make it through the use of the variable of presentation in the main filter. I've implemented the secondary filter that contains the SQL statement with values of Presentation variables in the WHERE clause. It has worked well.  The list of values in the secondary filter corresponds to what the selected main filter

  The problem is that once I chose values in the secondary filter, values have chosen also affect the choice of the main filter and all other dashboard views.

  Does anyone have an idea how to overcome

  Thank you!

  After a long search, I found a solution to this problem and I want to share the solution...

  How to set a prompt of dashboard (RFP) based on another DP

  The requirement:

  The DP main effects of the entire edge, but on a specific section table, it takes an additional RFP to make fine adjustment of the values chosen in the main RFP.

  Implementation:

  Set the dashboard of the guests

  • Set the main RFP in the game a variable presentation variable (we'll call him AA)
  • Qualify the second PD (fine adjustment) invites for presentation variable (we'll call it DD)
  • Choice list values, must be defined the Sql result as
  • SELECT 'city '. "' Francisco ' saw_0 'Model' WHERE 'city '. "Short-term" IN (@{AA} [' @']) (the yellow part is critical) .
  • Important: after you choose the multiple choice questions in the main DP (AA), they will be displayed as choices in DP (DD). If we want to accurately adjust, we can choose in the list.

  Definition of analysis

  • Create identical reports 2 where the difference between then is simply the FILTER.
  • The report based on the main DP has a filter that Francisco is invited.
  • The refined report has a filter City_Name is equal to / in (DD is the variable of the presentation of the second DP)

  2 points:

  1. Do NOT set a default value for the variable of presentation
  2. Define Protect so that this will not affect the DP of the hand

  Set the dashboard

  • Put each report in its own section
  • On the section of the report, set a condition that the records in the refined report is equal to 0.
  • On the section of the partial report set a condition that the records in the refined report is LARGE to 0.

  Such filling only the main DP the full report will be displayed and when the tuning prompt came the refined report will be displayed.

  I used the blog of Boris: OBIEE in Illinois: OBIEE guest - 2 prompts on the same column - part 3

• Filter sample app

  The App from the DPS Fast Company has a filter in the upper right corner in certain points of view. This feature will be available on the full version?

  Hi Jeffrey,.

  The app of Fast Company is a proof of concept app that allowing us to discover a wide range of ideas. Not all of these ideas will be in the initial 2015 DPS, and filters is one of these. In light of the comments we received on the beta version, it is likely that we will focus on other areas for new features before filters.

  Neil

• Number of comparison in the sem_match filter clause failed to Jena

  Hello

  I have the following query of sem_match, which has a filter clause to compare a variable with a number. It works in oracle very well; but, he failed in Jena.

  Select interval_length

  table (sem_match ('{? dose_interval RDF: type: Dose_Interval.? dose_interval: dose_interval_hourly? interval_length.}))

  {filter (? interval_length < "6.0" ^ ^ xsd: Decimal)}'.

  sem_models ('test'),

  sem_rulebases ('owl2rl', 'testRules'),

  sem_aliases (sem_alias (", 'http://www.example.com/test#')), null))

  I run the query in Jena, but got the following error:

  Exception in thread "main" java.lang.Error: problems compiling pending:

  The operator * is not defined for the argument type java.lang.String, java.lang.String

  Syntax on the token "6.0" error, * expected

  Is this a bug or something wrong with my request? Thank you very much in advance.

  Hong

  Salvation Hong,

  SEM_MATCH works well on JDBC. (Adapter Jena has performed SEM_MATCH on JDBC for many years.)

  Now, I tried to compile your code and could not be compiled. After correction of some minor problems, I can compile it and run it without encountering errors.

  public class TestHong

  {

  public static String szJdbcURL = "jdbc:oracle:thin:@localhost:1521:orcl";

  public static String szUser = 'scott ';

  public static String szPasswd = "Tiger."

  public static String szModelName = "test";

  public static oracle Oracle new = Oracle (szJdbcURL, szUser, szPasswd);

  Public Shared Sub main (String [] szArgs) throws SQLException {}

  Chart GraphOracleSem = new GraphOracleSem (oracle, szModelName);

  Instruction stmt1d = null;

  try {}

  stmt1d = Oracle.GetConnection () .createStatement ();

  String res = null;

  String szQuery = "select interval_length ' +.

  "table (sem_match ('{?})). dose_interval RDF: type: Dose_Interval. ? dose_interval: dose_interval_hourly? interval_length. " +

  "filter (?). interval_length< \"6.0\"^^xsd:decimal)="" }',="" "="">

  "sem_models ('test'), ' +.

  "null," +

  "sem_aliases (sem_alias (", 'http://www.example.com/test.owl')), "+".

  "null));

  System.out.println ("Request is" + szQuery);

  ResultSet checkInterval = stmt1d.executeQuery (szQuery);

  System.out.println ();

  System.out.println ("* case 1: dose of the medication that is less than the recommended interval range *");

  System.out.println ();

  System.out.printf ("% - 25 s \n", "duration (hours)" ");

  System.out.println ();

  If (! checkInterval.isBeforeFirst ())

  {System.out.println ("OOPS! In case 1, the medication dose intervals were not ");

  System.out.println (); }

  else {}

  While (checkInterval.next ()) {}

  RES = checkInterval.GetString ("interval_length");

  System.out.printf ("" % - 25 s & \n, res);

  }

  }

  System.out.println ();

  }

  Finally {stmt1d.close () ;}

  }

  }

  This is the result I got against a model empty.

  Query is select table interval_length (sem_match ('{? dose_interval RDF: type: Dose_Interval.? dose_interval: dose_interval_hourly? interval_length. filter (? interval_length < "6.0"^^xsd:decimal)="" }',="" sem_models('test'), ="" null,="" sem_aliases(sem_alias('',=""> http://www.example.com/test.owl')}), null))

  * Case 1: meantime of dose of the medication that is less than the recommended interval

  Duration (hours)

  OOPS! In case 1, the medication dose intervals were not

  It will be useful,

  Zhe Wu

• Don't know what version of Photoshop to get, I need the oil paint filter.

  I am a new designer and class, I did some really cool stuff with paint filter oils and I LOVE IT, it will be a large part of the style I want to develop but I'm on a test of CC and it isn't here! I did my homework and found out that apparently the latest version of CC has eliminated the great filter! Go figure!

  I want this BAD filter, then, what are my best options?

  Adobe has so many products and versions that I am really confused about what to get.

  So should I get CS6? Or y at - it an older version of CC who has the oil paint filter?

  I saw somewhere, there is a filter of painting in oil or plug in the CC, but only for windows and I am on a Mac.

  Please advice

  CC has the filter. It has been removed in 2014 CC

• Cross tab / filter the lines of pivot

  Hello guys,.
  It's been a day and I can't understand how to filter PivotTables using RTF Model Designer in word.
  The web-page-builder has a filter function, but the RTF an it is missing from the menu. So I think there must be some scripts.
  I had up to now:
  <? If: cartype = 4? >
  <? end if? >
  but I don't know where to put it, I tried to place on each item but... no luck.
  Someone there done that before and can share the secret?

  Hi BIPuser,
  Finally, it worked. I added the following to the for each element.

  ----------
  
  ---------------------------
  

• How the snippet to the filter condition?

  Hello world
  I have a doubt. I searched a lot for the explanation, but could not find.
  
  I have a table TAB1 with columns A(primary key), B, C source
  There's an excerpt on TAB1, ext1, which has a filter clause "* filter (@compute (c) = 1) *"
  When I do an update on TAB1 with the following query
  setting a day TAB1 value B = 100 where A = 200; *
  the redo log will not have the value of C stored for this transaction (it will have the values between A and B only according to my knowledge)
  but the snippet should check if the operation meets the filter clause 'c = 1' which cannot be controlled of redo logs
  How to check?
  
  I did the update, has confirmed that the update is reflected also in the target table, then checked v$ sql area for any selection made by goldengate on source table query to check the value of C for the operation but I have not found such a request
  
  Published by: 958073 on February 13, 2013 12:41
  
  Published by: 958073 on February 13, 2013 12:42

  There are two ways to do:

  (1) to activate the extra record for column C, so each time a record is updated in the table, column C is recorded in the journals of recovery. This can be done in

  GGSCI > TRANDATA ADD . TAB1 COLLARS (C)

  (2) FETCHCOLS use in the TABLE of your snippet file param clause to allow for the recovery of column c of the source database when the value is not in the record of the transaction. This can be done by adding the following

  TABLE TAB1, FETCHCOLS (C),
  FETCHBEFOREFILTER,
  FILTER (@COMPUTE = 1 (c));

• How can I add a filter function for the implementation of the default library of dps html

  The standard observer has a filter button that appears automatically when you use the filter 'library' in the folio producer.

  None of the html application examples seem to integrate it.

  The flow of sample data (LOCAL magazine) does not seem to have any data either filter.

  So my question is: an html application allows the use of a button filter and if so, how it should be?

  Hello

  Yes its possible, but you must maintain your filter values either statically or create an instance of local storage.

  We have made such an implementation for a customer.

  kregs

  Michael

• Received a filter that is assessed to a region is empty.

  Hello!
  
  We have migrated our hyperion 9-11 system, and we have problems with essbase. We have the two 'execution' version (in separate servers) and we noticed that when the user who has a filter in the essbase security and this user acess the cube from spreadsheet add-in on version 11, he get the warning "a filter received which is evaluates to an empty region. Filter is ignored. ". In the 9 system warning, this does not happen. I checked two databases and I saw that they are exactly the same. Why this warning happens right on the 11 system? What does that mean?
  
  Kind regards
  Rafael Melo - BR

  Is it 11.1.2 that you're talking about, if it is then it can be useful to have a reading of ' warning '1022004 a filter received which is evaluates to an empty region. " "Filter is ignored" [1300347.1 ID] ' on My Oracle support.

  Symptom

  In the Essbase Excel Add-In, trying to connect to a database/application and retrieve data with a user filter definition that includes MetaRead the following warning message appears:

  'Empty 1022004 attention received by a filter that is assessed to a region. Filter is ignored. »

  Cause

  The cause of this problem is not known.

  This problem has been identified as new Bug 9700270 - FALSE ALERT WHEN you SELECT AN application WHEN METADATA FILTER ANCESTORS OVERLAP

  Solution
  This problem has been fixed in version 11.1.2.1.

  Strange how the cause of the problem is unknown, but it is fixed in 11.1.2.1, how you fix something that is unknown I have ever know.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• DataGrid, refresh and filter, need a bit of help

  Hi all.

  I have a datagrid.  It's full on application creationComplete using the following code

  protected function application1_creationCompleteHandler (): void
  {
  db_services.endpoint = " " http://bleh/AMFPHP/gateway.php ";               
  db_services.source = 'jobs '.
  db_services.destination = 'amfphp ';
  db_services. GetOperation ("getYourJobs"). Send();
  }

  My datagrid is then pulling in data from the table as follows

  < mx:DataGrid width = "362" height = "340" itemCreationPolicy = "immediate" includeIn = "clientuser" x = "1" y = "30" dataProvider = "{YourJobsArr}" id = "CU_YourJobs" >
  < mx:columns >
  < mx:DataGridColumn headerText = "" ID: "width ="42"dataField ="id"/ >"
  < mx:DataGridColumn headerText = "" ad Ref: "width ="70"dataField ="jobref"/ >"
  < mx:DataGridColumn headerText = "" company: "dataField ="companyname"/ >"
  < mx:DataGridColumn headerText = "" Position: "dataField ="position"/ >"
  < / mx:columns >
  < / mx:DataGrid >

  There is a log on screen until the user gets to see this datagrid, however, and based on that they connect as a filter is executed on the data, the filters is

  YourJobsArr.filterFunction = GetYourCurrentJobs_filterFunc;
  YourJobsArr.refresh ();

  This code is located in the statement of success login

  protected function GetYourCurrentJobs_filterFunc(item:Object):Boolean
  {
  If (item.assignedrecruiter is LoadedID)
  {
  Returns true
  }
  on the other
  Returns false;

  
  }

  This is the filter

  Now, this works well, as I connect to different accounts, they can see that the data they are supposed to.

  However, I have another State where the user can add data to the database mysql, which comes from the data.

  Now that they submit this button, I need to remind the AMFPHP script to call the database and retrieve all the information once again, that the data added are looked at.

  I did it using this on my "submit" button

  < s:Button x = "88" y = "200" label = "create a task" click = "createNewJob (), application1_creationCompleteHandler ();" "/ >

  Now the only problem here is that all the data is reduced, it is not filtered.

  Can anyone suggest how I can then re-filter-la before his watch?

  -All right, so what is happening out there, is that you create a new ArrayCollection collection object which (being again) has no filter function. All you have to do in the result handler is the value of the function of filter and then apply the filter with a refreshment.

• Shuttle / search filter

  I have a system that has been in production for a few months. It has a filter search, search filter, as well as a part of the shuttle. The user can enter a search filter that will select all the specialties that begin with the text in the search filter, or the user can select a popup (i.e. search filter) who could fill the search filter. As soon as the [Enter] key is struck, the left side of the element of the shuttle would be filled according to the search filter. The problem from the point of shuttle is not met and, therefore, the report contains all companies rather than the companies that match the search filter.
  The system uses two javascripts.
  A javascript fills the search filter based on what has been selected in the context menu:
  >
  function specialty_lookup_pick() {}
  $x('P9_SPECIALTY_FILTER').value = $x('P9_SPECIALTY_LOOKUP').value;
  }
  >
  
  The other javascript fills the element of shuttle based on what has been entered in the search filter:
  >
  function f_filter_shuttle_item (pThis, pShuttle1, pShuttle2, tbl_Name, can, tsVal) {}
  If (pEvent.keyCode == 13 | tsVal == 'Yes')
  {
  If ($x (pThis).value.length < 3)
  {
  Window.Alert ("specialty of research must be at least 3 characters.");
  Returns false;
  } else {}
  If (document.getElementById (tbl_Name)! = null)
  {
  document.getElementById (table_name).style.display = ";
  }
  var l_Return = null;
  var l_Select = html_GetElement (pShuttle1);
  var p_array = ";
  
  for (i = 0; i < $x (pShuttle2) .length; i ++)
  {
  If (p_array == ")
  {
  p_array is $x (pShuttle2).value;.
  }
  on the other
  {
  p_array = p_array + ":" + $x (pShuttle2) [i] .value;
  }
  }
  get var = new htmldb_Get (null, $x('pFlowId').value, 'APPLICATION_PROCESS is filter_shuttle_item', 0);
  
  Get.Add ('SHUTTLE_ITEM_VALUE', p_array);
  Get.Add ('FILTER_ITEM_VALUE', pThis.value);
  gReturn = get.get ('XML');
  If (gReturn & & l_Select) {}
  * var l_Count = gReturn.getElementsByTagName("option").length; *
  l_Select.length = 0;
  Alert (l_Count);
  for (var i = 0; i < l_Count; i ++) {}
  var l_Opt_Xml = gReturn.getElementsByTagName ("option") [i];
  appendToSelect (l_Select, l_Opt_Xml.getAttribute ('value'),
  l_Opt_Xml.FirstChild.nodeValue)
  }
  }
  get = null;
  Win3.close ();
  }
  }
  >
  
  + After the javascript 2nd test, I've determined that Count is always equal to 0. +.
  
  I don't know why it is always 0. The shuttle point is never displayed with the data.
  
  Can anyone help?
  
  APEX 3.2
  Oracle DB 10.0.2.3
  IE 7 and Firefox 3.6.10
  
  I put it on apex.oracle.com.
  
  Apex. Oracle.com credentials:
  Workspace: RGWORK
  Username: Tester
  password: test13
  Application: Mini-profile 38410
  Page: 1 > select Construction > Page 9 > click pop up arrow to the right of (press Enter to select the specialty) > choose something > press ENTER.
  
  Robert
  http://apexjscss.blogspot.com
  
  Published by: sect55 on October 19, 2010 12:16
  
  Published by: sect55 on October 19, 2010 12:32

  Hello

  I think that now it works.
  You had p9_tbl_specialty table ID where shuttle is written in javascript parametter uppercase. JavaScript is case-sensitive.

  Kind regards
  Jari

• How to change the filter on a table as case insensitive?

  Hello
  
  I use JDevelloper 11.1.1.3.0. I have an ADF table that has the filter on top. I need to do case insensitive filters. When I type 'A' in the filter and press on enter, he must bring all records that start with 'A' and 'a '.
  
  Thank you

  Select the column in the table and look for the filterFeatures property. Assign the caseInsensitive.

  You will need to do this for each column you want to change. You can hold the CTRL key while you click on multiple columns and has replaced the property, both for them.

  Published by: Blaine on August 30, 2010 13:19
  SDK (Spelun Doent Kownt)

  Published by: Blaine on August 30, 2010 13:25
  Okay, this time I really he correctly spelled... I hope.