HP 700-414: what case fan coolers and CPU would fit into a 700 HP - 414

Similar Questions

• What is a URL and where wouldI

  When Iwas filling registration I was asked to enter the URL, but I don't know how to find

  What record are you talking about?

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/deleting+cookies

  Make sure that you download and install the version of Firefox from the official Mozilla servers.
  You can find the full version of the current version of the current Firefox (37.0.1) in all languages and all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

• What is maximum ram and cpu advances the HP60 - 533 CL?

  Hello!

  I have a laptop model HP60 - 533CL. It's a Socket P.

  I want to upgrade the processor and the ram of my laptop and I want to learn what is the maximum FSB of the CPU and what is the maximum FSB of Aries.

  Can someone help me with this?

  geoath wrote:
  

  Hello!

  I have a laptop model HP60 - 533CL. It's a Socket P.

  I want to upgrade the processor and the ram of my laptop and I want to learn what is the maximum FSB of the CPU and what is the maximum FSB of Aries.

  Can someone help me with this?

  Hello

  The best processor you can have is T9600 but I think T9800 or T9900 might work too. All three processors run the FSB to 1066 Mhz. The chipset is probably GM45...

  http://Ark.Intel.com/products/35134/Intel-82GM45-graphics-and-memory-controller-hub

  The chipset supports up to 1066 Mhz also. However, the maintenance manual lists only DDR2 memory modules, and it can support max 800 Mhz FSB (see details of chipset). Means that if you upgrade the system it all runs at 800 Mhz.

• What are some possible PSU that can fit into a HP Envy Phoenix 800-030qe

  I'm looking for a new power supply and a GPU soon. It is difficult to tell an image on the internet if she will agree even with the dimensions of the case and the power supply. What I really would like to, it is MI CoolMaster V850 because will change from the GPU and everything to come. ID rather go a lot on what I bad finish to help and have some extra, then buy a new one when I start to change things more. No position would be great. I was looking at the GPU was the EVGA GTX 750ti FTW. Thank you

  This is the basic material: http://support.hp.com/us-en/document/c03804605

  Hello

  The EVGA NVIDIA GTX 750ti should work without modification of the power supply.  Save you money and keep the HP 600 watt PSU.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• ZBook 14: What DDR3L GB of SDRAM 8 expansion fits into my ZBook 14?

  Hi all

  I'm looking for an expansion of 8 GB SDRAM for my desktop ZBook 14. The ZBook model number is F0V18ET, the specifications are the following:

  Intel Core i7-4510U (2.0 GHz, 4 MB), 35,56 cm (14 "") FHD UWVA eDP ESP LED (1920 x 1080), 8 (1 x 8 GB) DDR3L SDRAM, 256 GB SATA SSD SE, AMD over-pants M4100, 802.11ac, Bluetooth 4.0, webcam, Windows 7 Professional 64

  The shop I bought to sent me a H6Y77AA (or 693374-001) equivalent, which does not fit (that on a small cut on the side of the connector on the right, whereas it should be on the left). Here is a picture of the installed 8 GB SDRAM and the expansion slot:

  

  Does anyone know what 8 GB memory could adapt?

  Thanks in advance.

  Best regards

  Joost

  joosth wrote:

  Hello

  No, have not tried. He could do that, but to me it looks like not to it's supposed to go this way...

  Hello

  It must go this way (flip).

  Kind regards.

• Muse, DW and reflux would merge into one?

  I'm sure that this issue has been addressed before, but there seems to be so much overlap between these three applications.

  Adobe can, of course, keep them separated for financial reasons.

  DW manages heavy coding with certain abilities.

  MU manages the design, but breath when it comes to suitable diagrams. In addition, there seems to be a the dead-end approach, if you cannot export the code.

  Reflow of edge handles sensitive but is more oriented for prototyping and not ready to use

  As a designer with experience in coding, I'd love to see all three applications in one.

  Look at what is happening out there in the being. Cloud based apps like, Sketch, Webflow, Ara, and HFE will eat lunch Adobe is they do not scale up quickly and offer a compelling alternative.

  Each do some aspects well, but still lack some of the usability Designer are used. Dragging items into containers and applying classes are not my idea of intuitive design.

  Most of my designer colleagues all talk about this magic and elusive "InDesign for the web."

  Adobe step up and make this request of Unicorn that will become the standard de facto for creating web/mobile?

  Muse has a lot of things to improve, but it's a very different app than Dreamweaver. The two are almost opposite of each other in terms of philosophy.

  Honestly, there is no 'perfect' web design or web application development. I have a couple of friends who still think that Notepad is the best web site editor.

  I expect that muse will eventually incorporate at least some delicate design capability. At least, it would be nice to make some of the same functions as Edge reflow, specifically the "breakpoint" characteristics, as well as some features of layout "liquid". I have the feeling, although other features, as some scrolling effects functions, would be changed or broken under such an approach. Choice on what visual tricks that they will have with a reactive approach compared to others, they you have at their disposal in an approach to layout fixed or designers could be stuck with one or the other. Muse allows designers to create separate mobile and Tablet versions of a web site design layout. I think they should allow custom formats for that, especially to address the monitors large high-resolution. Even responsive designs do not work very well on these things. Any web design looks pretty empty or very pixelated on a screen iMac 15 megapixel. We need more than just the HiDPI 2 x setting (for example, 1. 5 x and 3 x).  In the end, we'll be stuck many versions of a web page design to accommodate all of the extreme differences in the size/resolution of the display and horizontal/vertical orientation. The computer and electronics industry seems to have no clue to the subject to settle on a uniform standard. They can not or do not even try to find a way to allow phone users to keep their devices horizontally. It might be a good way to reduce the amount of vertical video, horrible, ugly, stupid, infecting the web right now.

• What is the case fan just to get to a m9426f

  I need a case for hp m9426f fan it says it's a foxconn model PV902512Lwhere can get me a

  Thank you

  I ordered this one low Gelid Silent FN - PX09 - 20 9 92mm TC temperature controlled case fan silent 38CFM 11 ~ 23dBA

• Acer Predator AG3-605 case fans?

  Hello, I saw that the predator AG3-605 does not come with box fans, but has the slots for them, I just wanted to know what size fan do I need for the side and rear of the case.

  Saniro,

  You made a good observation, but the system is designed for energy efficiency and the optimal use of the way in which it has been designed from the factory. I just found a location for a system fan and it's backward. Looks like it can accommodate 80mm or 120mm fan, but I'm not sure that these specifications are not included because it was not designed with the idea of using or needing the extra airflow.

• M8000n - replacement case fan?

  Hi people,

  My son-in-law has a M8000n with a defective rear fan (also known under the name case, or chassis and system fan) and I would replace it for him. I bought a new 80mm fan, but felt that it was too small, the mounting holes do not align the holes of the rack back.

  Can anyone tell me please what I need size? I'm sure it's 90mm or 92mm, but I don't know who. I searched every document from HP, I can find it and googled until my fingers are numb.

  Thanks in advance! :-)

  "wb2001" - thank you very much for your quick response!

  I've never personally used HP products before, so I wasn't aware that 92 mm is the standard.

  Exactly what I needed to know whether Live & Learn, right?

  Thanks again! :-)

• Elite E91XX: CPU/Case fan help please

  Hello

  I got my Elite e9150t for over a year and I was very happy with it. This Christmas, I've added a video card MSI GTX460 with a cooler ventilated internally. The video card use on 150W under full power and it is not a little too hot for my taste.

  My PC is in a custom-made in the office with the construction of ventilation in. The Office currently has a USB-powered fan that pulls 17 ft3/min, and I'll add two more this week. I hope that will solve my problem, but if it is not my next step is to upgrade the case fan in the PC. It's really painful to remove the desktop PC, so I'm hoping to get some answers here.

  From what I see the fan is a 92mm unit. I don't see the brand name, what type of connector, there or CFM rating.

  Of you can look at the fan in your system to e91XX of elite and give me some info that you can find on the fan? The fan has a 3Pin or 4pin on the motherboard connector? It blows out or in the case?

  Thanks in advance,

  Chris

  Chris,

  I use the EVGA GTX 460 1 GB but not the EA model (venting).

  You must still understand how to get fresh air in the office and the hot air outside. More ventilation top and bottom will help you. You may even consider using some fans to stream manipulation.

• What is POP, POP3 and IMAP, when I set up my email account in the HP ePrint App?

  I did as much research as I can do regarding the implementation of the HP ePrint App e-mail accounts.  If you do not see your e-mail information listed here, feel free to post below or contact your internet service company provider, by phone or e-mail, or to anyone else who might know this. I am sure there are many others that could be added, but this is a pretty comprehensive list.  I hope you find what you need to complete the setup of your e-mail applications.

  I noticed information differs from site to site, but as I've learned over time, masking the area and companies buying other companies, I just studied all the information that I could find and also if one of the names of hosts or ports does not work, then you can continue see below on this page to see if this information is the same. At that point, if you do not find what you need here, I would say that you have done all you can do before contacting appropriate for your information by email support team.

  Most of the links is active and those listed below should send you directly the pages I pulled this information since then, but only a few of them came from the real support of the sites themselves (Apple support was vague, as well as Microsoft, Macintosh and commonly used Internet services providers). Save you time by searching here first.  I hope that you will find what you need in this one-stop-shop and if you get an email that is not listed here, please report it below and I'll add it to this original document.

  Finally, as this information comes to the forum and other non-official sites, I want to add that it is a document of copy/paste/edit-for-easy-read I created in my spare time. It is a very long document, so I do is recommended to use the search and find keys to find the email that you need, but the upper part of this definition has as to what the servers, ports and are host names and the basic setup in case you need to know what are these options and their meanings.

  Here are the most common settings needed to implement most of the Clients POP3/IMAP e-mail or devices:

  The following information below can be found at http://www.swestcom.com/Support/q4.htm

  "What is POP3?

  Post Office Protocol version 3 (POP3) is a standard messaging protocol used to receive e-mail from a remote server to a local e-mail client. POP3 allows you to download e-mail messages to your local computer and read them even when you're offline. »

  "What does IMAP mean?

  The Message IMAP (Internet Access) protocol is a messaging protocol that is used to access e-mail on a remote web server from a local client. IMAP and POP3 are the two most common of messaging Internet protocols to retrieve emails. The two protocols are supported by all e-mail clients modern and web servers.

  "Main difference between IMAP and POP3:

  The POP3 protocol assumes that there is only one client connected to the mailbox. On the other hand, the IMAP protocol allows simultaneous access by multiple clients. IMAP is suitable for you if your mailbox is about to be managed by several users. »

  "What is SMTP?

  SMTP simple Mail Transfer Protocol () is the standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 and sometimes you may have problems to send your messages in case your ISP has closed port 25 (How to check if port 25 is open?). To determine the SMTP server for a given domain name, the MX (Mail eXchange) should have more information."

  "When you set up:

  • POP - choose that POP-UP and the port entering the default server to 110
  • IMAP - choose IMAP and the port entering the server by default to 143
  • All other parameters are the same.
  • Username = [email protected]
  • Password = the password you set up when you set up your mailbox
  • = Incoming mail server mail.yourdomain.com
  • = Mail server outgoingsmtp.yourdomain.com
    • Outgoing requires the authentication of the server (typically found in the settings or advanced options)
    • Do NOT select "Log on using Secure Password Authentication".
    • Use the same username and password as incoming or select "use same settings as incoming.
    • Outgoing server port= 2525 or 587
      • It is subject to change according to individual preferences of your ISP.

  Note - Replace with your domain name for "yourdomain.com" and replace the first part of your e-mail address for "user".

  Email ports
  For networks, a port means endpoint to a logical connection. The port number identifies what type of port it is. Here's the e-mail ports by default for:

  • POP3 - port 110
  • IMAP - port 143
  • SMTP - port 25
  • HTTP - port 80
  • (SSMTP) - port 465 secure SMTP Protocol
  • Secure IMAP (SSL IMAP4) - port 585
  • IMAP4 over SSL (IMAPS) - port 993
  • Secure POP3 (POP) SSL - port 995.

  It is just to recap, a series of ports for people who need this information when you configure the HP ePrint app so that they could see their email from the app, I've collected over time.  I am sure that other applications also need this information.  Although long, I couldn't find a more complete place to retrieve this information.  Feel free to post additional information, faulty information or other associates subject below that it is simply a collection of data and it would be virtually impossible to test all of them. Thank you!

• HPE - 590t: Suggestions for replacement CPU Cooler & case fan

  Hi all

  I would like to replace the fan in my HPE - 590 t.  Recently, he made loud noises and yesterday it sounded like a car was at my house with the idling of the maximum RPM.

  I know that some have recommended the Coolermaster Hyper 212 EVO in previous threads, however I have some concerns regarding this cooler would fit in my case, as it seems that I have about 1.5 inches of space to the left of the cooler and about 1' of headroom above the stock cooler.

  Here are the specs for my motherboard.

  I have a case of average size, I would be grateful any recommendation for the appropriate CPU cooler.

  Ideally, I'd like something that could last another two years and be as quiet as possible.

  HP DV9310 Windows 7 Professional 4 GB RAM
  
  DV7t-6100 Windows 7 Pro 8 GB RAM
  

  Ruette,

  I wanted to let you know that you were right about the question of the back plate on the motherboard.   I decided to order the aftermarket cooler that I mentioned, and when I went to install it, it appeared to be welded directly on the motherboard.  I was puzzled because I've never seen such a design.

  Because I could not remove the back plate, I couldn't install the new heatsink.

  Being faced with the choice of either ordering a heat sink used as you have suggested to the origin or the HP part since the website claiming to sell the stock heatsink heat, I decided to remove my HP Elite system and build a custom system.

  I built a new system with a motherboard MSI Gaming 5 and 4790 k i7 processor and used the ram, power supply, SSD, GTX 750 ti and other components in my system HP Elite for my new build. All these elements I just mentioned were anyway under a year of age.  Of course, I had to spend money on a Windows 7 operating system at retail, but also a new case, but overall it was worth the money. I also think that in the end I started to the cultivate my HP and it was just time for me to upgrade.  Now, that I'll stay with custom desktops built and stay away with OEM computers due to the unusual limitations that the OEM wants to place on their systems.

  Thanks again for all your help!

• XW6000 cooling fan and CPU connector issues

  XW6000 workstation, 2 x 3.06 Ghz Xeon processor, 4 GB RAM, Radeon X 1600 512 MB AGP, OS Windows 7 video card.

  Hello, all,.

  I have a strange problem with this otherwise excellent camera. A couple of weeks, he has begun to close randomly and would usually start at the next attempt. I suspect the graphics card and replaced him as fans, cleaning the CPU fins cooling and re - apply CPU thermal paste. The computer was fine for a day or two and then become erratic, with the same symptoms as before. Then he refused to boot at all - the screen remains black, all the cooling fans would be out for a second, then rest static. I didn't hear any beep codes but the HD light was lit in green.

  The PSU was then replaced by no effect. I went through the usual process of reinstalling components failure, removal/replacement RAM & other devices in order to see if they were the problem with no improvement. In all cases, the HD light would turn green for a second or two, the PSU/CPU fans would be like before kick and then the red light HD flash intervals of one second.

  Finally I found the PSU and CPU fans would turn at maximum speed, when I disconnected the CPU power connector six pins. But of course the computer then wouldn't start. The left light shone right green and red.

  The computer is now completely disassembled and I can't find anything obviously wrong (fade/broken) on the motherboard. Clearly, something is being short circuit when the power of the CPU is connected.

  Is a new motherboard required or is there anything else I can try?

  Thanks in advance,

  esseff.

  It was the motherboard (again)!

  I just set up the replacement for the replacement and everything works fine now. No problem with the revalidation of phone despite the change of the major component. Hope this helps someone with the same symptoms.

  Thanks to everyone for their help.

• Satellite L655-11Z (PSK1JE) - how to position the external fan coolers?

  Hello

  I buy laptop cooler and I would like to know how to position the fan for best results rigorous. I read manual from top to down, but only the bottom showing pic of this laptop is only for "this is batery. I would like to know, where (from the bottom) is the position of the disc HARD, GPU and CPU and if the coolers are sucking air in or blow air.

  Pictures would be appreciated.

  This is the photo I found in the Manual:

  Click on: [http://img543.imageshack.us/img543/5746/zadnistrana.jpg]
  (you can download and locate the position if you like, this will help a lot)

  Thanks for the tips!

  Hi zblebt,

  Of course, there s no problem using these external laptop coolers but I don t understand why.

  You have an internal fan problem or why you think external cooler?

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.