HP 7310xi can't turn on printer

Similar Questions

• HP5510 printer hung like a wireless network. How can I turn it go by laptop, on the stairs?

  I have a printer HP5510 hung like a wireless network.  How can I turn it go by laptop, on the stairs?  I always have to go upstairs % turn it on before printing wwill

  You can not, the printer must be turned on to make it work.

• OfficeJet HP6500A more: can't stop e-Print to get the claim Code

  HP support says "disable e-print and deliver on the clain code obtaion" I can't disable e-print! When I try I get a message saying 'the printer could not connect to server' error 'you can connect the printer to a proxy through the internet' "to do so enter the proxy server and enter the details when you are prompted" MY QUESTION: WHAT PROXY SERVER? Where can I find the so-called proxy server. I can not turn off the e-print without mysterious proxy server. Nobody at HP Support knows, they want to come on my computer. HOW THAT WILL HELP, IF I HAVE TO GO IN THROUGH THE PRINTER? I'm not let someone remote my computer! I've done it before and all they do is look around where they don't belong, then tell me "I have a friend who can fix it for $200.00" BS! I just want to know how to get the claim code so I can use e-print. This may not be such a mystery that emit a person cannot tell me by phone or e-mail, how can I recover the claim code. OR, where I can find this mysterious Proxy Server turns off e-print, so I can turn it on the recovery of the claim code.  PLEASE DO NOT SEND ME LINKS OF WHERE ALL THE ANSWER OF WHAT IS CALLED, IT IS HERE, I HAVE ALREADY DID NOT RESEARCH DAYS, JUST GIVE ME ANSWERS TO MY QUESTION *.

  WHAT PROXY SERVER? Where can I find this so-called proxy server!

  Hello

  First download and install the latest firmware below, then check for the difference:

  http://ftp.HP.com/pub/softlib/software13/Printers/oj6500/OJ6500_E710n-z_R1621A.exe

  Once the latest firmware has been installed check for the difference once the HP ePrint menu.

  If the same error persists, press the right arrow and press Setup, then Web Services configuration tab.

  Tap on delete Web Services and follow the steps to the web services of devil.

  Then enter the menu of Web Services again and follow the instructions on the screen to reactivate the service and check for the difference.

• want to 5540: can I leave my printer connected 24-7? Does go in mode "sleep"? I print every day!

  Can I leave my printer connected 24-7?  Does go to sleep mode?  I do not see every day or week necessarily!

  According to the manual (HP Envy 5540 all in a manual series) on page 22, it goes into powersave mode after 5 minutes of inactivity. You can change this time in the control panel if you wish.

  After 2 hours of inactivity, the printer will automatically turn off, and you have to press the power button to restart. This auto off function is not active if the printer has wireless or WiFi Direct features turned on. Or if she has a fax, Ethernet, or USB connection. This info can be found on page 23 of the manual linked to the previous paragraph.

  -dave

• HP Officejet 6830: wants to turn off printer 2-sided, and the author of the previous question link does not work

  to turn off printer 2 faces, and the author of the previous question link does not work

  Please read this post then provide some details.  What operating system? Windows, you can change the default value by going into the directory devices and printers, click with the right button on the Officejet 6830, select Printing Preferences, and choose the desired default values, apply.

• How can I get my printer online after him to go offline

  I have a printer model Epson SX515W wireless placed offline for no apparent reason.

  How can I get this back online.

  Without knowing more about your problem, I try to put off the printer, then save.

  If this does not work, try closing down (and turn it off) all peripheral cables connected to your router and stop (power off) all wireless (WiFi) devices that use your router (including printers)... then turn off your router and save. Then, turn your printer back and power your computer upward... and see if that helps.

  If your printer is still offline, try to fix on your router by ethernet cable, printer power down, attach the cable, printer power up.

  If all else fails, contact Epson.

• HP DESKJET: Can't set up printer

  Hi, I bought a HP desjet 2130 MFD, these are the problems that I had.

  1. the user guide, pictorial shows only, the receptecals of ink, but not what ink cartridge goes in what receptecal. It's not important?

  2. the ink cartridges will not hold tight in the receptecals, and while I try and work how he wants to adapt, ink receptecals to regain their place to be when the ink is installed. As there is no switch for out, the only way to achieve namely, turn the printer off and on again.

  3. I tried to register the product and said getting into the product and serial numbers. I found what I think is the product number on the bottom of the printer, although his title is in Chinese I can't be sure, as I don't speak this language. I can not find a serial number.

  I think that's it. Assistance would be appreciated.

  Hi @BigJon1,

  After loading the paper, the printer automatically prints an alignment page when you first set up the printer.

  Let me know how make you out. Thank you.

• How can I configure to print wirelessly on a Mac

  Hi guys,.

  I recently bought the HP Laser jet P1102w.  I took the printer on location work and used for the first time.  It was a process of soimple of the printer and automatically downloaded and installed MAC software.

  As we were out of the office, us were not connected to the wireless network and was therefore not able to configure the printer to the netwrok.

  Now that we're back in the office, I want to set up the printer so that it can be used without wire of all devices connected to the network.

  I can't find how to do on MAC OS X 10.6.8.  I removed the printer from the Print & Scan utility and tried to install it again when you are connected to the network, however I am still only able to print when connected by USB.

  I understand that I can print via the device connected to the network, but rather would set it up to do all together with wireless.

  Please can you point me in the direction to find the instructions for set up?

  Any help is most appreciated.

  Hi @EI2014 ,

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Claire on the former network settings on the printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the Mac.

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• HP ENVY 4520 all-in-one: HP ENVY all-in-one 4520 can't turn off

  I can't turn off my printer, it enters mode "Eve" only.  I press the power button, it comes to life, tap again and ensure that as soon as the switch mode.  Any help would be appreciated.

  Hi @Freckles60,

  Welcome to the Forums of HP Support! I see that you have problems with putting off the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Do a hard reset of the printer.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer, to see if that can help, printer All - in - One HP ENVY 4520

  Select your operating system.

  How is the printer connected?

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• pfc1510 how can I stop it printing test page

  pfc1510 how can I stop it printing test page, it does whenever I turn on printer began after ink cartage replace I don't know how to stop it.

  Hello

  What happens if you unplug the printer from the computer and then restart the device?

  Also, try a hard reset after you disconnect the printer.

  Hard Reset:

  Take out the toner cartridges.

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• Convert a JPEG text to a form that I can change and then print.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: how to convert a JPEG text file to the one in which I can change and then print?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  This can be done better with Adobe Photoshop CS5 http://www.adobe.com/products/photoshop/compare/ which is about the gold standard for working with documents of the image - but it's a bit expensive.  It also won't be easy even with this program - it is possible but it will take time and effort.

  If you do not Photoshop, you can use the tool text box in Microsoft Word or picture in Microsoft Publisher - even if they are quite a bit more difficult to work with Photoshop (which is hard) and the results will not look as good, regardless of how carefully you use. The advantage of Word on the editor, is that you have the possibility to use a Wordart object and 3D text. So these are the vector graphics as opposed to a bitmap will not appear on your final print rasterized (but this isn't a problem with Photoshop)

  Quality is really about how much the text superimposed on the image - if it is separate, it will be much easier than if it is covering the picture (so the question is how to fix the image once the text is deleted or changed and not only to change the text).  And it may not be a simple matter to simply correct a word or two, if you do not have the same font available - you may need to change the entire text, so it will look right.

  Another solution is to use OCR software to scan the image, and then try to modify the text.  Still, it won't be easy (probably even harder than the options above) but it's a possibility (depending on how the text is mixed with the image).  The problem here is that most of the options just freeware have the ability to make such a complex task, so you would probably need a comprehensive program of recommended.  Here are some options:http://www.simpleocr.com/OCR_Software_Guide.asp.  What you should do the work is also quite expensive and if you choose this option or the above options depends on what other uses you may have for these programs (and the quality you're looking for in the finished product), once again, I don't think something will do the job as well as Photoshop - I have Photoshop (an earlier version) and I never tried to do it before I did a bunch of other things that would seem impossible.  I don't want to attempt this task if the text superimpose the image, because although I think it would be possible, it would take a LOT of time and effort to obtain a finished product of acceptable quality.

  Technically, you could use Microsoft Paint to do this, but the quality would probably (which are certainly) be terrible and I doubt you want to even keep yourself let alone print it or send it to someone else.  In some cases, it might do the trick but it's free (again, depending on where to find the text and especially if she superimposes the image).

  Regarding the conversion of the JPG file, I'm not sure what turn you to who would make it easier to change and change as you suggest here.  Perhaps TIFF, but it helps very much.  Here are some converters of JPG files:http://convert-jpg.software.informer.com/.  Even if you converted to a .doc file, you could just open it and change the text - it is not as simple as that.

  Another option would be to convert the JPG file in a file of CAD and CAD software allows you to edit the image - but I'm not familiar with CAD products so I can't offer recommendations here (except that I heard that most working properly are still more expensive than the above options and they can be used just about everything).

  Whatever you decide to do, it won't be easy (and perhaps costly as well).  There are freeware programs that claim to be able to do these things, but you will not be disappointed by the quality (unless the text is separated from the image, you can totally erase what's there and replace it with the one you want).  For them, you can search on Bing, Google,www.tucows.comand www.download.com.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows can't open add printer. Impossible operation completed (error 0x000000c1)

  When I try to "Add a printer" in the Panel in Windows 7, I have "Windows can't open add printer." Impossible operation completed (error 0x000000c1). »

  I uninstalled all the other printer drivers (I'm pretty sure. How can I know?).

  It's an all-in-one HP Officejet Pro 8600, and I can use the scanner very well. I can't add the printer.

  Thanks for responding!

  I tried several solutions and searched many forums. This has actually been a problem for some time now, and I do not know what facilities of printer driver broke.

  I did put a lot of thought into it and just posted stuff to the network and printed one of my other computers. It became a problem recently, when I was too lazy to get up and turn on one of the other computers. :-) I then decided that I just needed to fix it.

  I read all the posts I could find for each version of Windows treats this problem and tried each of them. I removed all the old drivers (at least I think I did. I couldn't find anybody would say, 'Here are the drivers installed.'). I downloaded the new drivers from HP. I edited the registry. I went to the folder/Windows/System32/Spool/something and deleted all. I searched all references to Lexmark (my old printer) and deleted.

  In any case, last night my boot sector failed, so I ended up reinstalling Windows. I just finished now, and the printer works fine, now.

  No,

  PS I'm sorry that this thread will be of no use to any person responsible research. I found a lot of them, too.

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]