HP 7520: Connection to the wireless printer

Similar Questions

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Just bought a HP 6500 e has and a computer (windows 7) could not connect to the wireless printer

  My new printer is not recognized by the network wireless in my computer (Windows 7). USB print ok

  The printer seems to be connected to the network, but my computer is not connected to the printer. It will not print on request. The print project going on in Quebec but will not communicate with the printer wirelessly. If I plug in the USB it will print.

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• connection to the wireless printer

  Firefox does not send a complete document on printer.

  Other programs print to this printer correctly? Have you tried to reinstall? Have you read troubleshoot printing in Firefox?

• Cannot connect Windows XP to the wireless printer.

  WINDOWS XP PRINTER WI - FI CONNECTION

  I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

  Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

  Lonnie,

  Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

  • Search system folders
  • Search for files and hidden folders
  • Search subfolders

  Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

  Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

  • C:\Windows\i386\Driver.cab
  • C:\Windows\Driver Cache\i386\driver.cab

  You can also find these files on the "recovery disk".

  Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

  Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

  https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

  The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

  Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

• No WiFi connection between the laptop <-> printer... printing of habit!

  My laptop does not show a green WiFi level or levels of ink for my Epson SX430 printer and will not print. I've uninstalled and reinstalled the drivers updated as requested. All cartridges renewed and checked... Print test paper after 5 long minutes of waiting. Will not print a document windows? Printer shows RED above copy/printing area. Looked at all areas of problem-solving. Done everything that I can think to start... No chance!

  Hi Suzanne,.

  I apologize for my late reply.

  According to your description of the problem, you are able to work with the printer when it is connected directly to the system via a connection cable. I suggest you try the following steps to diagnose the reason the printer works fine with the system of didn't make any problems with windows except if connected wireless.

  Method 1:

  Run the next fixit and check if it helps:

  Diagnose and automatically fix problems printing and printer

  In addition, check with the advanced sharing settings as described in the following method.

  Method 2:

  I suggest you to change the following options in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Check if you can connect to the wireless printer.

  In addition, please try the steps outlined in the following link:

  Solve printer problems

  Hope this information is useful. Please post back your results for assistance.

  Thank you.

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• can not print says printer connected to the wireless network but pc says printer is offline

  happened before the printer says connected to the network but pc says offline

  Ok

  Have you tried the Network Diagnostics to see you the network can see the printer

  Go to www.hp.com/go/tools

  Network Diagnostics has a link to the wireless printing site that can help out you.

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• Connect to a wireless printer lost after installing Microsoft XPS Document Writer

  Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. what happens when you try to print?
  2. you receive an error message?
  3. What is the brand and model of the printer?

  Method 1:
  You can try the steps in the link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  You can temporarily disable the antivirus on the computer and check if you are able to print.
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  You can uninstall and reinstall the wireless printer and check.
  Check out the link and check.
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Just reply with the results. I'd be happy to help you more

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• dv6t-6100 laptop loses the connection to the wireless network

  I n HP 6100 dv6t Select Edition Entertainment Notebook PC running Windows 7 (64 bit) with a card Intel WiFi Link 1000 BGN. After starting the laptop and looking e HP Connection Manager to display the message connected WiFi only immediately disconnected.  This just continues as long as the computer is on.  All work well for at least a year before it started, and to my knowledge has not changed have been made.  I have internet Comcast with TM602G ARRIS cable modem and a Netgear WNR1000 router.  I tried to uninstall and reinstall the network adapter, unpluging power and reset the cable modem and the router and start up the laptop in safe mode with network without success.  Connection to the laptop computer directly to the router works fine.  I also have a second laptop running windows 7 with two IPads some smartphones and my printer HP connected wireless without any problem.  I also tried turning off other devices with no luck.

  Thanks again, already tried to reset the modem, the router and the PC as you suggested and that did not work but I tried closing all other devices connected to the wireless router and the laptop connected properly.  Guess I will just have to turn on devices one at a time to see if one of them is to interfere or just for many connected devices.  It's again the aid.

• Photosmart C4780 cannot connect to the wireless network

  My Photosmart C4780 worked just well, wireless, and now I can't print unless I connect it to my laptop or desktop via the usb cord.  I'm under that Mac OSX 10.9 with the Mavricks downloaded on both computers.  I was able to print from my Mac Mini, iPhone, iPad and MacBook Air all without problem, but now my WiFi network Test report said that I do not see "Network name (SSID found)".  The Configuration Page of my status Netowrk said HP network is Offline and my Active connection Type is None, but I can see my network under number of 802.11 networks discovered.  I think I just need to connect or reconnect the printer to the network but I can't find how to do this anywhere on the help site.  Can someone tell me how to connect my printer to my network now?  When I first installed it on the network, I had no 10.9 OSX with Mavricks so the installation CD works perfectly, but it does not work either.  One last thing, when I try to use the screen on the printer and go through the WIFI Protected Setup the two push button and PIN fails.  HELP PLEASE...

  Hi hisfunbox,

  I'm sorry to hear that you are having problems connecting to your wireless printer.

  I have included a document with steps on how to change the printer to a USB connection to a wireless connection. It has a paragraph for Mac OS X Lion mountain/OS X v10.9 Mavericks v10.8. The second option in this section is how to move from the existing USB connection.

  Installation of the software of the printer for a wireless network connection

  http://support.HP.com/us-en/document/c02273853

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?