HP 810-150se: VENT at the bottom front of 810-150se?

Similar Questions

• Satellite A660 - 11 M - vents on the body

  Hi all!

  Last week, I started to play ARMA 2 on my SATELLITE A660 - 11M and after 20 minutes of play, it of hot and automatically closed. I read a lot of topics in the forum and decide to clean the cooler with compressed air can. Suddenly ive noticed this laptop isn't under the reoxygenation of body orifices, exactly where where is the cooler fan. To describe this more correctly, I can say that on the side rear of the body of the laptop there is circle from vents but this grid is absolutely fully molded.
  I think it comes to Foundry defects.

  Anyone has the same problem? How can I do a breakdown of the holes?

  Hey,.

  If you mean the holes to vent on the bottom of your computer, I can say it s normal Satellite A660 doesn t have a. Friend of me has the same laptop as you and its a doesn t have holes to.
  So everything is ok with your laptop!

  It would interesting to know, if you have installed another nVidia display driver directly. These drivers have another thermal management and can cause problems.

  I recommend you to install the latest Toshiba display driver which is pretested.

• Closed Firefox itself, updated itself and then restarted itself. But the capture, there is no address bar. No windows bar at the bottom either.

  Seriously guys.

  I was in the middle of a YouTube video, firefox gives me the ability to "close the program or wait. I click wait, but it still crashes. Be it, right? Just restart it and return to my video... Nope. Nada.

  Clever little "updating" Firefox dialog box appears. I said aloud, "hmm, I don't remember not accepting an update... not to mention firefox on a curious."

  But I know, right? It's probably a new add-on, or an update for the Add-ons and plug-ins, I installed. It happens.

  ALAS! Firefox opens again, but lack essential things! One of them being the address bar. All this has disappeared. Disappeared! Vahmooshed! GAHN!

  My first thought was that I hit accidentally F-11. Joke on me, right?

  Nope.

  Because not only the whole thing up there is missing, but also my whole bar Windows at the bottom disappeared. What in the blue blazing cahones Zeus going on, guys!

  If there is an easy solution, I apologize in advance. I'm not so suhmart sumteyems. HURR durr.

  But, if it is a form any layout 'full screen' you guys are showing, please give me a way to quarantine it from my computer. It's terrible, like flossing with razorwire while only naked in front of Grandma. I do not recommend!

  But seriously. I know that I tried to be funny above, the devil, my username is an attempt at comedy. But I have a serious question and would appreciate an answer any.

  Thank you in advance for not responding with (tl; dr).

  Sincerely, Scootlebottoms XIV Westercheesenstudel

  ~P.S~ The attached photo of John Cena is relevant. It's a description States how "SUDDEN AND FROM OUT OF NOWHERE" update of terror has been for me. In my view, is accurate. Yes.

  So, I uh, just realized that all I had to do was click on "exit full screen".

  Well done, Firefox.

  Well played.

• Why does my toolbar on the bottom suddenly disappear all the time?

  The inferior plate which has all my other applications stay in place. My browser is not set to mode full screen. They tend to stay on the bottom.

  Sometimes Firefox is confused about the dimensions of the screen and the bottom of its window go behind or in front of the Windows taskbar. The typical 'quick fix' for this is to delete the settings file that lists the wrong size. You have activated the memory of this as clear Firefox toolbars. Here's how:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  To activate the different bars on and outside, you can use one of the following methods to view the list of the toolbar, then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• The bottom left of the Satellite L500 gets hot

  I have tried to understand it, but can't find any decent help on that.

  I have a 5 years old toshiba Satellite L500 and continues to get very hot on the lower left side. Now, I know that my hard drive is in the bottom right and this side never gets hot. So what I need to know is really what the balls - what is getting hot at the bottom left?

  I can't find patterns that can tell me exactly which part is which on the inside, so I have no idea of what gives me questions when I'm using the internet or play games. I have a fan in my laptop and it is on a surface of grated so air can get to it easily. The problem lies in the lower left hand side.

  As is - this does anyone have an idea why the low 1-1, 5 cm my screen gets too hot? It would be great! Thank you.

  As a writer, it is very worrying that these things as I need my laptop to stay alive for a year or two. (Cannot afford a new and use it for literally everything I do...)

  > So what I need to know is really what the balls - what is getting hot at the bottom left?
  How about the vents?

  The left side for laptop contains cooling grids, and you will find the cooling fans.
  Hot air flow by the left hand side so the surface s mobile is hot

• Photosmart 5520 (but also others) duplex printing cleared at the bottom

  Very recently, I bought a Hp Photosmart 5520 and I found that sometimes the bottom of a page is cut off when printing double-sided. I looked in this forum and found that this problem is hardware related and can not be solved, but there are solutions. I did a few tests with my current setup and I want to share my discoveries, here for other users waiting for HP to add a FAQ for the photosmart 5520 entry. (but also for the 6520 and 7520, probably)

  The problem is clearly stated in a few messages, dating from September 2013 and Nov 2013, although it is not very easy to find

  http://h30434.www3.HP.com/T5/other-printing-questions/duplexing-discrepancy/m-p/2470573/highlight/tr...

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/double-sided-printing-is-cut-off-short-Phot...

  Basically, the margin of the low printable area is 3mm side simple impression, while it is 15mm (at least!) for the first page, double-sided printing. This is due to the fact that the printer must keep the paper in the output roll after that that he finished printing the first page. It is therefore IMPOSSIBLE to duplex - print a document with text or graphics that extends beyond the margin of the lower 15 mm, unless the page size is reduced so that the effective bottom margin is 15 mm. On the other hand, if the document does not contain text or graphics beyond bottom margin of 15 mm it CAN be printed double-sided without reduction.

  IMHO, the problem is that the default behavior of the firmware of the printer, the drivers of operating system and/or applications do not always properly address this limitation leading to surprising or unsatisfactory results.

  To better understand the limits and behavior of the printer, I have carried out tests under the following conditions:

  (1) copy 2-sided vs 1-side in the printer display

  (2) Windows 7 applications: Word2010, Foxit PDF reader, Acrobat PDF reader

  (3) 4.3 android: Cloud Print and HP ePrint apps

  The firmware in the printer is MGP5CN1351AR (Sep 12, 2013)

  The windows version of printer drivers is 28.8 (October 30, 2012)

  For tests 2 and 3, I have prepared a document word of 2 pages with headers and footers located exactly at 15 mm of margin top and bottom of the page and I have produced a PDF with CutePDF (unfortunately this forum does not allow attachments, otherwise I would have attached it).

  The results were as follows

  (1) in 2-sided copy the last 15 mm on part and on the other copy of the output are empty, even if the text of the content entry page, while, in 1-sided copy only the last 3 mm are empty (resizing is turned off, of course)

  (2) double-sided printed of Word2010 gives a duplexer not resized when the printing preferences, advanced options, "Arrangement" is disabled. If it is set on, the output is reduced. Print PDF files is tricky: there are several different options in Foxit PDF and acrobat PDF. Auto-Centre and adjustment - on the page to print double-sided, but do not keep the right size in Foxit PDF reader; If preserve layout is off a significant part of the bottom of the page is not printed, apparently due to the fact that the margins are not properly managed by foxit PDF. Acrobat PDF instead, leave a good impression both sides preserve the page layout and scaling are disabled (obviously up to 15 mm).

  (3) android Cloud Print prints the word and pdf files WITHOUT a provision to 'preserve', this is why some clipping may occur; HP ePrint prints two word files and pdf reduced in size, as if "preserve layout" option has been set.

  In summary, I'll leave the "preserve layout" options always on in windows and I'll take a cut on the side of double-sided printing and I use hp eprint instead of cloudprint. If the correct size is important to a PDF file, it is best to experiment with Acrobat PDF (even if it is not a light program). iI would be expected at HP improved the behavior of the windows printer drivers to print a PDF file.

  I hope that this post may be useful to other people.

  You are right, that the effective page size is reduced because of the extra margins required to manage the document in automatic duplex mode.  From the rear is donated in the printer from the bottom and bottom printed in the top margin is also higher top for the back to the front.

  The checkbox 'Keep the page layout' is important for results appropriate, although it will reduce the effective print size.

  I've seen reports before of Foxit PDF printing problems, I avoid and use Adobe Reader.

• The bottom of my maximized window is hidden behind the taskbar.

  Original title : problem with the task bar

  the lower part of each maximize window is behind the taskbar. How can I do if it stops right in front of him? im sure that my computer has the features to do given that it is only a recent problem.

  EDIT: adding photos for clearification

  what it should look like: http://img20.imageshack.us/img20/5879/taskbar2.png so maximize it should look like to someone that this first link. the difference being that the bottom of my media player is not hidden behind my taskbar as shown in the second link: http://img141.imageshack.us/img141/1621/taskbar1.png

  -------------------------------------------------------------------------------------

  If im not clear let me know :)

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Can I define the contour of an object to be on top / face and filling on the bottom / back?

  Can I define the contour of an object to be on top / face and filling on the bottom / back?  I've asked this question before and told to go to the appearance and drag the background and outline around as if they were a layer, but this did not bring my race to the top of the image.  I did this wrong somehow, or is there another method?

  I was just thinking ' didn't I said this the other day... ". "in any case...

  This is an object with a dark gray line and a red fill. the race is in front of the filling. any random object that you draw will be the race before filling unless you tell her not to be. You can say that the race is forwards here because it extends also on each side of the framework encompassing:

  

  Here, the situation is reversed. Note the appearance palette. You can fill is in the front because it now covers half of the race which extends inside the frame enclosing:

  

  If this is not the behavior you're seeing, it's time to refer to the list of Jacob.

• Keep a footer at the bottom of the browser window?

  I need my footer to sit at the bottom of the visible page area. If there is not a lot of content above it, then I can do that easily with absolute positioning.

  However if there is a lot of content if you have scroll bars on the page, and then when you scroll the stay of doenst div of footer at the bottom of the visible area of the page, but rather scroll you in front of her.

  Here, the window is larger than the content, so everything is ok:

  http://smartpeopletalkfast.co.UK/pics/first.jpg

  Here, the content is larger than the window. Without the scrolling footer div is in the right place:

  http://smartpeopletalkfast.co.UK/pics/second.jpg

  But now, when you scroll the stay of doenst div at the bottom of the window:

  http://smartpeopletalkfast.co.UK/pics/third.jpg

  Is there a solution to this?

  Thank you

  It does exactly what the previous poster had it do.  If you want it to be visible regardless of the length of the content and to scroll the page, move the footer outside your container div and set the fixed position.  Just be sure that you have enough margin on the background of the div so that the footer div does not end the duplication of content.

• Background image covers the bottom of the layer...

  How is it simple?

  http://www.animalcrackerspetsupply.com/BlankPage.html

  What you're supposed to see, but they are not seeing, is a colored area "mango" in the middle of the page. It appears perfectly fine in Dreamweaver, but does not appear when I saw, or transfer it to any browser. I did previously with just one color on the bottom of page instead of an image and it worked fine, (http://animalcrackerspetsupply.com/index.html) but I can't make it work with this image as background!

  I tried to play with z-index and visibility, and nothing works. Other layers on the page appear very well (ex: http:www.animalcrackerspetsupply.com/Index1.html).

  What gives? I use Dreamweaver 8 (because I can't afford CS5)!

  Thank you

  Kelly

  Here, it's just invisible due to no background color and no content.

  You forgot the sign # in front of the background color in the css:

  background-color: CC9966;

  instad of:

  background-color: #CC9966;

• How can I return the bottom of a book in the black to white iBooks?

  Suddenly the bottom in a book in iBooks became black, and printing is white.

  I don't like that, so, how do I change print black, white down more usual?

  There is nothing in iBooks parameters in this regard.

  Thank you.

  iPad upgrade 9.3.5

  Open the ibook, tap the button of the AA to the top right and select a different theme (superior to the setting of "Auto-nuit theme"):

  

• icon on the bottom bar of downloads

  I once accidentally deleted the downloads icon on the very distant-bottom right of the screen, on the bottom bar, next to the trash.  I was able to put it back, but now when I download something, it does not show first.  I have to go into the downloads folder to find it.  How can I do to make the last downloaded item appears when I click on the download icon?

  Control-click on the download icon and change the settings as you wish.

  (144782)

• iPad keyboard moved location. How to return it to the bottom of the screen?

  iPad keyboard jumped in the middle of the screen. How to return it to the bottom of the screen?

  Hold your finger on the tiny keyboard, and then drag it to the dock of Word. Finger release.

  As is.

  

• How to move icons of the add-on at the helm the additional module at the bottom of the screen

  I have a number of modules, and the icons on some of them take a lot of space. So the navigation bar is stuffed full. I added the bar add-on that appears at the bottom of the screen. However, I did not understand how to get the icons module moved to the bar downstairs. I'm sure it's something very simple, but I did find the magic combination to do it again.

  I would appreciate any help/suggestions you can give me. Thanks for your help.

  I don't know if it's relevant, but I use two laptops computers Toshiba running Windows 7 and the other is Windows 10. Both are 64-bit. And it is Firefox 42.0.

  Type of topic: customization< enter > in the address bar.
  In the new window, look for the icon. When you find it, press and hold
  the left button on it and move it to where you want it to be.
  You can move the icons you want here, but
  some icons are locked in place.

  Also, there is a default button in the Middle at the bottom.

• Have a grey bar at the bottom of the screen with red print that I can't remove.

  Since a recent update a gray bar with red print appears at the bottom of my home page every night and I can't get out. It does not appear to be a problem with any function, but I would like to know what it is and how to close it.

  Hi, this is a bug with adblock more in the latest nightly. Please see if they already have an update is available to fix this known or well to keep the disabled extension for now...