HP 8200: upgrade hp 8200

Similar Questions

• HP Elite 8200 SFF 8 GB RAM: Windows 10 64 - bit - upgrade Win7 to Win10 on HP Elite 8200 SFF - future drivers to win 10 64-bit?

  I've upgraded 3 computers (portable and desktop computers) to WIN 10 since the launch and made part of the Windows program initiated for 8 months - (identify problems with NVIDIA drivers, etc.). All of the family's computers have upgraded with minimum agitation outside HP Elite 8200 SFF - core i5 vpro.

  Be aware that this PC passes all diagnostics equipment and a new hard drive and compatible memory and work 100% without error on Win 7 Home - motherboard and processor are out of the box, two weeks ago. The PC has been reset to Win 7 since.

  After installation, there was a lot of blue screens including: -.

  Memory management errors

  Bad pool header error

  Several internet queries (probably from Microsoft OneDrive store)

  I understand that this machine has not been tested as part of a verification of the compatibility of HP / Microsoft.

  My question is: there will be updates on the site of HP driver Support in the near future to include 64-bit Windows machines concerned 10 drivers? Or links included for Intel Chipset drivers when they are available to Win10?

  At any time.

  I am pleased to have been of assistance.

  Maybe try again before the end of the free period.

  It is possible that they will have worked on bugs and the most up-to-date version at W10.

  Who knows, it might even be the integrated graphics Intel W10 driver that is buggy.

  I got my Elite 8200 throwing XP Pro x 64, Vista, W7 Pro, W8.1 Pro business and now in W10 Pro works perfectly on every operating system.

• Upgrade HDD in Tecra 8200 problem

  I am trying to upgrade the hard drive in my Tecra 8200 10 GB to 30 GB. I have adapters to connect both drives old and new laptop on my desk, then used cloning software to copy content from the old disk to the new, leaving the data on the old. The old and the new disks are formatted in FAT32. When I put the new drive in the laptop, it is not recognized. The configuration of the BIOS screen says 'no drive '.

  I tried 2 different programs of cloning and tried the new disk using a USB external box connected to the laptop, with the original drive mounted in the laptop cloning. Still not good. I went through the whole thing with a 20 GB drive that I use in the external case, and it is not to be recognized. The 30 GB and 20 GB are recognized and can be read by, by 2 different computer, so I am prety sure that disks are OK. The 8200 BIOS does not recognize them and it doesn't seem to be a way to force the BIOS to detect the drives.

  I thought that the 8200 would support larger disks, but this isn't looking too good. I hope it's something obvious that I forgot.

  Any suggestion would be appreciated.

  Hello

  As I know your Tecra should be able to recognize the 30 GB HARD drive. Maybe update the BIOS may solve the problem. Please on Toshiba download page has the latest BIOS update available.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU

  Good bye

• 8200 elite SFF Graphics upgrade

  Hello

  Everyone updated the graphic on a HP 8200 SFF? Could someone give me a tip should I get without upgrading PSU?

  Thank you

  Mattias

  Hello:

  The option for this model is the low profile card Radeon HD 6450.

  You can always find them around.

  Just make sure you get one that includes the profile low support in the editing area.

• Compaq elite 8200 memory upgrade challenges CMT

  Tried to upgrade my memory in my Compaq Elite 8200 CMT, running Windows 7.

  Bought this memory HP, HP 4 GB 240 - Pin DDR3 SDRAM DDR3 Unbuffered 1333 (PC3 10600) system memory low voltage model 647907-B21 - who must have worked, but it did not.

  HP technical support was not able to tell me why it doesn't work except to say that the 201 memory error means certainly was not compatible.

  Finally, I went back to it and got for about the same price Mushkin Enhanced Silverline 12 (3 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory Fund model 998770.

  Then the same thing started to happen, and I went nuts, try to install 12 GB and get these 201 errors completely. Finally, I tried one in the first place and managed to do the work, so I knew they were good. Then I started to notice that with all of the modules that I inserted, it gives an error 201 memory initially, but it passes then the second time.

  My feeling is almost it gives you this message after the first time after that any changes in the configuration of the memory and everything just it runs when you restart a second time in direct succession. It's like the first reboot is only for detection and error means nothing.

  I couldn't find anything about it in the manual.

  Hello:

  There is a problem with the BIOS.

  Read the release notes for all of the BIOS releases because I do not remember that the error has been corrected.

  The thing is my 8200 Elite CMT has the latest revision of the BIOS and I think I still have this error after upgrading memory up to 32 GB.

  As you said, it's just a thing time and once I hit the F1 key after installing memory modules mine works fine.

  And since I have maxed out the memory in the PC, I will not see this error.

• Upgrade to a Dell Dimension 8200?

  I have a very old Dell Dimension 8200 PC desktop computer I found at a sale of yard for free, and initially, it came with only 256 MB of RDRAM. I ordered a kit 1 GB for it, and the seller had shipped me 4 512 MB modules that fit into the PC, very well. Bringing the RAM from 256 MB to 2 GB, even if apparently the so-called 8200 can be up to 1 GB. A reason why what was possible? Anyway, I'll try and upgrade the processor 1.7 ghz on something toward superior (I must find the chipset that there) and if I have enough money, I'll put a better video in card. And before someone tells you to buy a new PC with the money it would take to put new parts in this area; I have a very good, 2013 PC that works very well. I just want to see how far I can spend the 8200, as a project more than anything else. But honestly; Why upgrade to 2 GB actually works if Dell indicates that it can go only up to 1 GB? I also saw that the PC that I use on a daily basis, an Inspiron 660, can use about 32 GB, if Dell says up to 8 GB, even though they sold the same model with about 16 GB. It's all confusing.

  Many Dell can handle more Dell's claim. Often the physical changes occur throughout the life of the model, and the newer versions will take longer. Limitations both the particular Chipset, BIOS and motherboard. Each doubling of RAM support takes an extra to be present address line.

• Dell Dimension 8200 Memory Upgrade after upgrade the processor

  Hello

  I have a Dell Dimension 8200 (shipping date is 01/05/2002) which came with a FSB of 400. I've recently updated the its origianl 1.8 GHz a 2.4 GHz processor.  I understand that the 8200 with a FSB of 400 can use 800-40ns or 800-45ns memory sticks (I think that mine came with 800-45).  I intend to upgrade memory 1 GB to 4 X 512 (2GB), I installed (4 X 256).  My question is when I went to buy the 4 X 512 memory, said the pub, it could be used in a 8200 with a 2.1 GHz CPU or less.  I have a 2.4 GHz chip. Is that going to be a problem?

  Rbatleman,

  Great question!  When the Dimension 8200 was released the processor speed max was 2.1 ghz (probably why the memory you were viewing had this label).   We have updated later to the processor 2.4 ghz when it was available.  The two units came with the PC800-45 (400 mhz) memory, you should run into any problems with this memory.  Keep in mind the system supports only the RIMM modules that contain devices memory of 4, 8 or 16.  I hope this helps!

  -Andrew

• Upgrade dimension 8200 HD?

  So I would much upgrading the hard drive of my computer desk Dimension 8200 factory (I think a Seagate Barracuda ATA IV 80 GB Ultra ATA/100 hard drive, 7 200 rpm, 8 MB - MPN: ST380021A), and wonder what, if any, limits there are that I need to keep in mind. For example, there is a limit on the size of the cache HD that can handle my computer? Obviously, the performance more that I can get better is, but what is limit my machine (or how do I know)? Thank you!

  
  

• Tecra 8200 upgrade?

  Hi it :-)

  I just bought used Tecra 8200 PIII850MHz 20 GB HARD drive, 256 MB of RAM and AI have a question - in theory, if I flashed the latest BIOS, what is the frequency of maximum CPU which can insertend in the laptop (PIII 1 will, work with it, or maybe just 1 GHz 2 GHz?)? What about HDD - will it work with 40 GB (or more) Toshiba HDD? The specs found on the Web from Toshiba site say about 30GB HDD, but I hope that they are a bit outdated ;-)

  Greetings to all
  Michael Kornacki

  Hi MicKor,

  the maximum frequency of the processor is 1.0 Ghz
  and the maximum of 30 GB HARD disk memory

  Good bye

• Issues upgrading RAM for Elite 8200 i7 Desktop SFF & CMT

  Hello.

  I recently bought 2 Elite 8200 i7... Lucky me.

  The first one is PSES, the second is a CMT. LTS such as a desktop computer, CMT and an ESX host.

  It's my plan.

  I will remove the current RAM of the CMT and put it in my SFF brining it up to 8GB.

  Then I'll buy 16 GB for the CMT...

  (1) what is the lowest latency CASE RAM can I buy for this machine? (240 pin DDR3 PC3 - 10600 1333 MHz)

  Secondly, when the 8 GB sticks are reasonably priced, I've fulfil the CMT, moving the 16 GB to the SFF.

  Given that the two boxes can use the same type of RAM...

  (2) what is the maximum RAM the WTO can take, I saw 32 GB and 16 GB quoted in different places.

  Thank you.

  Hello

  Today bought the 2 additional modules.

  32 GB works fine!

  See this printscreen:

  

• Upgrading PSU in Elite 8200

  I am trying to upgrade the PSU to accommodate a Nvidia Geforce 560. It requires a minimum of 450 watts.

  This model came with a 320 Watt which seems to be an exclusive POWER supply.

  Is it scalable?

  Hello

  HP Partsurfer tilts only the power of 320 watts.

  This Manual can provide better information on the three power connectors.  See page 7-3.

• BlackBerry Smartphones BlackBerry Curve 8200 won't receive any email after upgrading to OS 5.0

  Dear community! As you can can read about my BB curve will not receive emails after I upgraded to OS 5.0. In fact I created 2 email accounts on my BB. An ([email protected]) Webmail and the other is not based on the web (I guess..) ([email protected]). the two worked normally until I upgraded to OS 5.0. In fact, I got 2 or 3 emails the same day and the next day, he stopped. I searched the forum for a solution as possible and already tried :.) Get out of my battery; wait a few minutes; restart the BB). The reinstatement of the "host Routing Table".) Service reference books (both e-mail-accounts), but none of those who worked. Can you help me? Thanks for the effort in advance! Best, Goran

  Hey sdgardne! Thanks for your quick response! I actually downgraded my OS to the previous version and updated again... everything works well again. Pretty weird. Thanks anyway for your efforts

• The upgrade of Terca 8200

  I need to know this as the biggest hard drive I can adapt, if I can use a P3 1 GHz processor and if I can get XP Pro to run on it? I've already put a 256 MB ram in!

  Hello Raven

  As far as I know that the processor may not be changed. Agreement of the Tecra 8100 specification supports the disk HARD 20 GB max. Unfortunately there is no public document on this subject, but you can contact the service partner or even some independent HARD drive offering.

  In my opinion WXP will work well with 256 MB running but if you want to improve performance uses more Ram.

• HP Elite 8200 ultra-Slim: graphics card

  Hello
  
  I have a desktop Hp Elite ultra-flat 8200 and I wanted to get a graphical upgrade, so I decided to buy an ATI Radeon 5450 mxm 512 MB discrete graphics card, when I put in my computer and turned on, I could not find the drivers, my screen has been changed upward, my resolution was changed and I could not change it back and it made my game even worse than before I already know that my computer is not the type of game, but any type of graphics upgrade could help out me. My main question is, why does it worsen my computer?

  Hello:

  Have you tried the MXM AMD support page of your PC graphics card driver?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037959 & swItemId = vc_95361_1 & swEnvOid = 4059

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.