HP All in one J6111 of 3050 has

I tried for months to make it work for me.  First of all, when I installed the printer, I chose to let the printer (not the stop energy saving).  It stops all the time.  Then, I get an error of queue.  I can't keep this printer works.  What piece of junk (me or the printer). If anyone can help I would be grateful - if I'm not trashing it and buy another brand.  I was always a person of HP so far.  I am running VISTA and a connected with a USB key. My computer is an Acer Aspire desktop.

OMG it was so easy TY TY so well after the last installation that I did not have a spooler error still fingers crossed.

Ciccarelli says:

Hello

To turn off except the mode button press Setup (Rinch Button) > Auto Power-Off > turn off.

Tags: HP Printers

Similar Questions

  • scanning of pictures on my computer from the series of J611 all-in-one HP Deskjet 3050 has

    I've uninstalled and reinstalled the software, but when I try to scan, the message arrives that the scanner can not find my computer.  What should I do now?

    Hello

    It's much better scan from your computer, this method allows more options. But if you want to scan from the printer to your computer, you must initiate or enable the analysis of the computer first TO your computer (Windows):

    (a) click (or double-click) the printer icon.
    b click on Manage scan of the computer,
    (c) enable

    You can start this option with Windows by checking a square box.

    Kind regards.

  • Cannot scan computer with J611 of all-in-one HP Deskjet 3050 a

    I use WIndows 7.

    I can scan from the all-in-one HP Deskjet 3050 a J611 assistance from the control panel.

    I was able to run a scan of the computer. But now when I select the icon on the desktop to my all-in-one HP Deskjet 3050 a J611, I see more scan options.

    Shane,

    I connected with a USB cable and everything works now. It is not convenient, but it's a solution. It's still a mystery as to why he's working for a few months and then suddenly stopped working.

    In any case, thanks for the follow up several times and find a work around.

    I'll provide Bravo and mark this thread as provided solution!

  • 320 HP - 1190 has: the hp all-in-one (hp 320-1190 has) have they a vga to the back as Ive broken touch screen?

    I have unfortunately broken the touch screen on my disabled son all-in-one, I think it's an hp 320-1190 has (or similar No..). I can't tell you the exact model No. as he is now deceased under repair. I was just informed that the screen is no longer available and so they cannot provide me one to fix the pc. The pc above has a vga / digital Jack on the back? If so, I can almost certainly plug in a new screen to hold it for a little longer. Or, as it is not so much the touch screen, is it possible to replace it with a plastic or glass front?

    Any help much appreciated.

    JohnBoy61.

    Hello

    No, many HP AIO machines don't have VGA port at the back, including your:

    The back of the system
    Figure: Return of the system

  • All-in-one HP Officejet 6500 has: paper size or the type of error message problem

    I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
    I get a paper mismatch (type and paper size is incorrect) error message.
    The printer is not connected to the internet, but it is connected by a USB cable to the computer.
    I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
    This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
    Thanks for your help.

    17/03/2015 #2

    I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

    Thanks for your help,

    LK

  • All-in-one HP Deskjet 3050 a J611 series - mavericks and wireless set up

    Hello

    I have a HP Deskjet 3040 A J611 all-in-one printer, I have had this printer for about 2 years and everything worked perfectly then I bought an Apple again everything was fine but when I updated my software that I got from the Mavericks and since then everything has gone wrong... I updated my computer and I got AirPrint now and also HP ePrint (currently). How was never the printer don't work or connection.

    Problem 1:

    When I tried to solve the problem that I uninstalled all HP drivers to reinstall - found you must install apple application made! (Airprint)

    The printer was taken over by the computer and I can scan but I can not print, I am using the USB cable and when I print the computer indicates it's printing and printers lights but nothing happens (no), then the computer shows the impression is made - but the printer does not print. Scan works very well.

    Problem 2:

    Due to recurring problems with the wireless connection, I wanted to reconnect to the router - restore the default value.

    But now, because I don't have the drivers of HP, I have no idea how to connect to it and I tried two ways of connection THAT WPS is not working when I press on the road... nothing happens and the PIN, where are you suppose to enter the PIN, nothing comes up on my computer (USB connected)

    I read the installation times pages but may not know what is wrong, any advice would be appreciated.

    Hi Lilly4,

    I can certainly help you get the printer on the network and running again.

    Follow the steps in this thread to turn the printer on the network without using the software or the WPS button. I think we do this way of success.

    If you continue to experience a problem once the printer on the network, please let me know. Thank you.

    I hope this helps.

  • All-in-one Deskjet 1510: "cartridge has no" deskjet hp1510

    I just replaced the black cartridge for the first time on my deskjet HP 1510. Before replacing the status for my tricolor cartridge supplies still show a lot of ink. I use the official HP deskjet 92 black ink cartridge and the cartridge three-color 61.

    After replacing the black ink cartridge, the two lights on the printer ink started to blink and the HP utility application on my computer States:

    Device status: ink cartridge problem

    Alternative: Cartridge failed - tricolor ink cartridge failed - black ink.

    I tried to restart the printer, remove and reinsert the cartridges and clean the contacts of the cartridge. I also followed the instrucutions of http://support.hp.com/us-en/product/HP-Deskjet-1510-All-in-One-Printer-series/5157551/model/5157552/...

    There is no change in status, and I'm unable to print.

    Unfortunately, my warranty expired 6 days ago so I would be recognizing any suggestions to solve this problem. Thank you!

    The e-all-in-one printer Deskjet 1510 uses the black 61-61 color cartridges as indicated on the site of HP SureSupply here.

    There was an old series PSC 1510 which could have used the 98 black cartridge, but the HP 98 is not compatible with your printer.

    You need to replace the cartrdige balck with a 61 HP or HP 61xl cartridge.

  • 6510 all-in-one printer 211: 6510 has suddenly paper jams paper

    Paper jams are continuous. The upper part of each leaf has a 1/6 "dent about 1/2" long and 3-4 "on the side. Another paper has same type of damage. Will be removed all paper crowded at the top of the machine. Decided that there must be a mechanical problem and removed the 7 screws of the plastic on the bottom clamp to remove the bowl. When he was abducted some plastic black 11/16 "long with a 7/16 diameter gear on each end is out. The tree has a hole inside had to an axle. I sought visible signs where it may be at the bottom without success. I need advice before I go into it any further.  Thanks in advance for any help.

    Hello

    IAM afraid, you may need to replace the printer.

    Call HP Tech Support 1-800-474-6836 (USA)

    If your printer's warranty, you can be equipped with options of recovery.

  • HP all-in-one-24-g085na: Virus has wiped out the computer

    Unfortunately downloaded a virus and all partitions on the drive hard lost, y at - it a recovery disk which can buy to reinstall the bulkheads, OS and software drivers.

    @arthur-d1, welcome to the forum.

    Here's a guide that will help you order the recovery media if you don't make them when you purchased the computer.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • I can't find the code for the printer on my printer all-in-one HP deskjet 3050 J610

    I disconnected wireless and the printer is off and turned on and connected re.  I changed the DNS to 8888 and secondary to 8844.  I printed 5 pages of network configuration and 4 reports of State printer and NOTHING to the printer on that code. How can I get a?  Thanx, Anna

    Hi Anna,.

    I'm afraid that the Deskjet 3050 J610-does not support a web service ePrint or Print Apps.

    Only the ePrint to support Deskjet 3050has (J611) as you can find below:

    http://support.HP.com/us-en/document/c03722645

    Kind regards

    Shlomi

  • Printers HP all-in-one

    I have the printer of J611 all-in-one HP Deskjet 3050 has.  When I try to print multiple pages or just 1, it prints about half the page then an error message & it stops printing. I can't even 1 full printed page.

    Hi again,

    Okay - could you please run the print and scan the doctor?  Let me know if it corrects errors, or gives another message

  • HP Beats 23 all-in-One: How do I access the hdmi port on an all-in-one pc of beats

    I want to connect a Chromecast for my all-in-one PC. It has a HDMI port. How can I change what is displayed?

    Thank you for the additional information.

    Here's what the specifications say HDMI port:

    Button HDMI In (to get the computer to recognize a HDMI connection, press the HDMI In when an HDMI cable is connected to the rear HDMI port.)

    He says, I don't think that the port can be used for output.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • psc2170 HP printer all in one... newly installed and printer works, but cannot scan.

    I use a laptop Toshiba Windos vista.  A friend gave me the HP all-in-one and the software has been installed immediately when I plugged it.  However, there is no icon on the desktop or HP Director.  When I press the scan button it says "without exploring op."   How to the the HP Director so that I can use the other functions?

    Take a look at this link that explains your options of scan to the 2170.

  • WANT all-in-one 23-o014: all-in-one monitor using the desire for PS4

    I want to know if it is possible for me to plug a ps4 to monitor my all-in-one desire. It has a hdmi port, but I don't know if it will work.

    Hello

    The following information may help:

    http://support.HP.com/VN-en/document/c04092080

    Kind regards.

  • Problem with the renderer on C510A all-in-one

    HP Photosmart eStation C510A all-in-one printer: print/copy has stopped working.  I went through the troubleshooting and normal maintenance, nothing helps.  At one point a message indicated that the 'print rendering engine"had ceased to function.  This printer was bought almost two years ago and is no longer under warranty.  I guess this question will require to send it in for repair.  It should be fix?  Or should I buy a new printer?

    Thank you!

    Well, the problem seems to be resolved!  A piece of plastic came loose from somewhere inside the printer (found in the paper tray) and eventually he was blocking the movement of black ink.  Removed the offending piece of plastic and everything seems to be fine now.

Maybe you are looking for

  • switch off graphic

    System Preferences > energy saver and disable graphics switching. There is no option to do

  • Error card Asynchronous RAS - can not dial-up.

    I thought I already posted here this question, but I can't. On my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connec

  • M30X does not stop

    Hello I turned on my M30X and the screen is always black and I can not turn off the computer. The blue light around the on/off switch is always on. When I push the button nothing happens. The hard drive is running. The Wifi light works very well and

  • Satellite A200 will turn off by itself continuously

    Hello I have a problem with my laptop because it stops itself constantly, having used internet for 30 minutes, or immediately after launching a major program like photoshop or autocad or a game. I spotted that it also runs very hot fast in a few minu

  • HP Officejet Pro L7590 and printing software Mac Yosemite 10.10

    I installed my Mac to a mew 2014 MacBook Pro with the retina and Yosemite 10.10.1. I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (th