HP Deskjet 2134: new printer does not print
You just bought a new hp deskjet 2134 all in one printer. I installed the easy start of hp software and the test page works. When I try to print a document, it appears on the print queue, but then disappears after a few seconds.
Help, please?
Hi @Towser-dm.
I want to help you with your newly purchased Deskjet 2134. I understand that you have setup the printer and complete program installation but are unable to print. Because you mentioned the software Easy Start, I suspect that you have a Mac. According to this hypothesis, I suggest the following steps:
Tags: HP Printers
Similar Questions
-
HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic
Hi all
My HP Deskjet Ink Adnavtage 2545 does not print Cyrillic characters, for example: България. I installed the latest drivers from the link below, but the problem persists: http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-Ink-Advantage-2540-All-in-One-Printer-ser...
I will be grateful if you help me to solve this problem.
Hello
I called the support in Bulgaria, but the cause has not yet been identified. :-(
Update (10/03/2015): the problem was caused by the original-black cartridge - which came with the printer. It has been cleaned and now everything works fine.
-
New PC does not recognize one of my Apple products
New PC does not recognize one of my Apple products in iTunes
Make sure that iTunes is up to date.
-
As new synchronization does not work for me, despite the setting it in total compliance with the Mozilla Web site and no one took the trouble to answer the previous post today, is it possible to return to the synchronization of the former?
To the best of my knowledge, the synchronization of the former is no longer available.
If you post some details on the problems you are having with the sync, we can try to solve your problem.
-
Since the upgrade of my new tab does not work, I press on the + icon and nothing
Since the upgrade of my new tab does not work, I press on the + icon and nothing
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab does not open.
Thanks for posting the details of your system. I'm skeptical about the "CompTool0234 Community Toolbar". Could you disable some add-ons and see if that helps.
On this tab:
Firefox orange (or the Tools menu) button > addons > Plugins category
Disable «Conduit Plugin»
On this tab:
Firefox orange (or the Tools menu) button > addons > Extensions category
Disable the CompTool0234 community toolbar.
Then very probably a link will appear to restart Firefox to make the change. Does make a difference?
-
new tab (+) does not work after the upgrade to v 23.0.1 forefox
I had firfox version 22 I guess... Now, today morning I upgraded to v 23. It displays a message from one of the plug-in is not compatible with wud and therefore be disabled. now later I still once downloaded the plug in to check if its works or not but TI worked (as I had already guessed), or its display in modules or plug-ins.
Now I don't get why the new tab does not work. Not at all. Its so very annoying. I googled the question and tried to reset firefox and the new tab in subject parameter: config. But nothing helped.
I think that its because of this plug-in I've read somewhere that the parameters can be getting replaced by one of the defective Add-ons.
Help, please.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can use the SearchReset extension to reset preferences to default values.
Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).
If you do not keep the changes after a reboot or have problems with preferences, see:
-
The new tab (+) does not work, or the file/new tab feature
The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.
This problem may be caused by an extension that does not work in the current version of Firefox.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
-
When I open a link in a new window does not display the web address.
When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Question
Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."
If you always open the last set of tabs, another approach is the following:
- Click on the orange button Firefox, then select options to open the options window
- Go to the general Panel
- Change the setting "When Firefox starts" to "show my windows and tabs from last time '.
-
Satellite L655 new battery does not charge
Satellite L655 new battery does not charge
Hello halik
It is not easy to say what the problem is here.
Purchased new and original Toshiba battery with the same part number (model number).New battery is recognized by the system?
-
MY new iPod does not connect to my 2006 G5 iMac. How can I download my iTunes (music mainly from my own CD) library on my new iPod. My iMac works well, but running an ancient operating system that does not seem to be updated capable?
This is not possible. I don't know what specific iPod model you have, but any new iPod does not work with a Mac running Mac OS X 10.4.11 (and support older version of iTunes).
There are more older models iPod work (you can buy used) and many of them, in my opinion, have GREAT sound quality. To playback audio, new does not mean better.
-
Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements
Hello
I suggest you to send your request in this forum for better support. -
On windows 7, right click - new - *file* does not appear to create folders, I see other files word, excel etc. are appearing but not "folders".
When I try to create Folders by right-click - New, it does not appear.
Help, please.
How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
If still no joy, see the 'response' by Linda Yan in this thread.
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
-
Why the button new folder does not work
the button create a new folder does not work
Hello
You have a common problem with Windows 7. The work that I and many others use is a utility called FileMenu Tools. You can download safely from this link: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .
After downloading, install the program. Each option is checked by default. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.
Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.
Let me know how you fare.
Kind regards
BearPup
Maybe you are looking for
-
Spreadsheet will not synchronize
Should not the numbers in El Capitan sync with iCloud - I'll still have to manually re - upload after editing my last paper numbers to Get it updated on the iPhone. I think that this Automatic w/b now. Thanks for all the ideas, Tom
-
disabled dregol Firefox; How can I fix it?
I thought I was downloading a new driver but I dregol.com and now I can't start Firefox. Can I fix or do I have to remove Firefox and download a new copy? Chrome has been affected, but I was able to replace dregol by google.
-
1. How can I get rid of the classic theme?-hating to the square of the tabs.2. where is low toolbar that lets me know (such as to empty the trash on my Mac) where I am trying to go to a new page?
-
I changed my password three times but am still denied access
After having the same password for several years, I am told that my password is now false. I tried to change the password, but am still denied access to my email. Is the problem with my username I've had for many years? What should I do to access my
-
Is it possible to wait in a queue and a reporter at the same time?
Hello! I'm trying to implement a model event producer/consumer with queues. The problem is that I have a certain value change events (for example from a slider) I want to make the tail upward; I want only the last value change events to be processed