HP deskjet 6540

Similar Questions

• Support for 64-bit driver for Windows 7 for Deskjet 6540 and Colorsmart D5360

  Or 64-bit Windows 7 drivers for the Deskjet 6540 nor the Photosmart 5360 supports the maintenance function is now impossible to clean the print heads. Two of these printers worked fine when they were connected to my XP machine. At HP dumbed down these drivers? Is there a separate program or sequence of façade which will do that for one of these printers?

  Thank you

  I do not know the D5630, but for the Deskjet 6540 you can do a cycle of cleaning of the façade, as follows: turn on the printer.  Press in and hold the power button, then press the Cancel (X) button twice, then release the power button.

  Note that it rare to * never * need to perform a cleaning on the HP cartridges cycle, it would be unusual to the same need forced into the life of the cleaning cartridge.  Perform unnecessary cleaning cycles will use ink and shorten the life of the printer.

• Deskjet 6540 Fast print quality loses chutes

  I am running Windows 8.1 64-bit. I've owned this printer HP Deskjet 6540 for a long time now, so part of me wondered if I should just buy a new printer. However, it works great except for this last issue. In the last few weeks, I started to notice that when I print in draft mode, normal, or fast, the text at the bottom of paragraphs or the end of a page is cut off, wasting the descenders on letters on this line. All retired with hp print and scan doctor. Pilots seem to, etc. If I print in "best" mode, it works fine, with no clipping. He is a recent problem. Any ideas?

  The issue you describe could be caused by an electrical problem between the printer and the cartridge.   I suggest you clean the contacts of the cartridge and printer as shown in the document here.

• Ned for Deskjet 6540 installation CD

  Bought a laptop without CD-ROM and plugged into my HP Deskjet 6540.  Charge Windows drivers correctly.  

  However, to access wireless, I need apparently information from the installation CD I can not use on this laptop.

  I didn't need the drivers, but the information to establish a wireless connection.  Can anyone guide me through the work wireless, or give a link where I can download the information from the installation CD?

  Thank you for your time.

  Hello

  A full Driver & Software functionality is not available for Windows 7, so a CD will not apply.

  The HP Deskjet 6540 includes not wireless by default, only an optional wireless print server, according to the list of characteristics below:

  http://www.shopping.HP.com/shopping/PDF/c8963a.PDF

  To get a better understanding of possible measures, you have such a server to external printing for your printer? We have used you printer wireless in the past?

  If so, do you have the HP Jetdirect ew2400 or HP Jetdirect 380 x wireless print server?

• HP 6540: HP Deskjet 6540 driver needed

  https://support.HP.com/us-en/contact-HP/product/HP-DeskJet-6540-Printer-series/357210/model/357212?s...

  Printer still very good condition.  Windows 7 repair facility now can not get printer to work.

  Installation CD is obsolete.

  Cannot get Windows 7 Home Premium CD to install the driver.

  Sometimes I can get HP Deskjet 6500 Series to appear in the Device Manager, then it disappears.

  Also where is the HP printer drivers on the Windows 7 Home Premium disc?

  This printer has worked without problem for years, worked on this years Dell desktop computer.

  Just need a little help.

  Thank you

  TxTrapper

  South of Texas

  @TxTrapper

  Good news.

  Thanks for the post:

  I fixed (and tested) the link to the driver in my original post.

  If you decide to install the software of full functionality (from link), create a Restore Point first!

  Help, suggestions and examples:

  Install the full features software - printer

  NOTE: If the computer has been recently migrated to Windows 10 or if you need to re - install the printer software:

  1. Create a Restore Point >
  2. Download a new copy of the Full Feature software >
  3. Remove any printer software existed for programs and features / applications and features / all Apps >
  4. Restart computer and log in >
  5. Install Full software functionality (found in your downloads folder > double-click the file) >
  6. Restart computer and log in to complete the installation

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printer software
  • Download and Installation
  • ...

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• XP x 64 driver for Deskjet 6540

  Is there a XP x 64 driver available for a HP DeskJet 6540?

  The driver for a HP DeskJet 6940 seems to work very well.

• HP Deskjet 6540 vs HP Pavilion 23-024

  Hello fellow forum members! : my friends has acquired a new Touchsmart 23 h-024 HP Pavilion running Windows 8.1

  A week ago their printer one model 2005 HP Deskjet 6540, which was attached to the aforementioned PC stopped printing

  right when their daughter needed print a high school book report.

  any solution to this would be appreciated to the max thank you very much for all the support & for me to be a part of this forum

  spacechild

  spacechild

• Just upgraded to Windows 7, but has a Deskjet 6540. How do I download a toolkit for ink levels?

  How can I check the ink levels on a Deskjet 6540 using Win 7?  Is a "Toolbox" available?

  The test page to be printed is not Windows, it's diagnosis of the printer page.  You can print it as described in this document.

• Printer Deskjet 6540 - no light showing

  Printer does not work.  All the LIGHTS are OFF but the power cord is connected.  Printer was working fine but do not turn on in the morning when we turned on eveything.

  Hello happycycler,

  I'm sorry to hear that your Deskjet 6540 will power not on.

  I suggest to reset your printerplug directly into the wall, avoiding bars, surge protectors, etc.

  You can also try a different wall jack and another power cord if you have another one that is available.

  I hope this helps.

  Kind regards

• Driver for Deskjet 6540 & Mac OS 10.7

  Tried to download the software from Apple and got the message that the driver software for my HP Deskjet 6540 is unavailable for OS 10.7 the intallation of original disk is not supported by OS 10.7 suggestions?  Thank you

  Hello

  Download and install the printer drivers HP from Apple combo:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Once this is done, enter print & scan and add the printer by clicking on the sign more. It should be added without problems.

  Kind regards

  Shlomi

• HP Deskjet 6540 Vista

  My HP Deskjet 6540 printer will not print, under 'status' error is displayed.   Help

  You are able to print a self-test of the printer page?

  Is - this error message on the printer or the computer?

  You can run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know the results.

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• Windows 7 does not recognize the printer hp deskjet 6540

  Since 4 weeks I am trying to install my printer hp deskjet 6540, but it does not, even though w7 tells me he knows the driver for hp... (but never, he manages to install)

  I tried the 'automatic' way and the 'manual' (installation cd & download driver hp), but nothing works?

  Help

  Hello

  Did you install the driver? You are able to print the test page?

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• DeskJet 6540 is more updated print driver?

  I have a deskjet 6540

  connected via USB to my mac OS 10.5.8

  If I try to print a .pdf file or a word or excel document type the printer seems to be the treatment but nothing ever happens.

  If I try to print from a browser window, the application will freeze.

  I did not express a software upgrade, but I guess something must have updated and created this problem since before yesterday he had never taken place.

  I tried power off, restart the computer & printer, uninstall & reinstall the printer, try the other USB cable and different USB ports.

  I appreciate any suggestions on what I can try next.  I tried looking for an update of the pilot, but could not find anything.

  OK, there is no software for Leopard, sorry.  These instructions may help.

  We will do a few things for you ensure that 10.5 is healthy:

  1. update from the drop-down list.

  2 HP drivers for 10.5 here.

• DeskJet 6540 not recognising installation of duplexer ph5712

  Hello

  Summary of the problem: I bought a duplexer ph5712 to work with my Deskjet 6540. 65xx Deskjets are listed as compatible on the ph5712 box. My operating system (Windows 7 RC1 x 64) does not recognize the presence of the duplex unit, even when I manually put the setting duplex unit installed in the properties of the printer and the printer are in Control Panel > printers & devices not installed to the Installed State. The duplexer is compatible with my printer, but it seems to be invisible to my printer and operating system. Here's a longer explanation of what I've done so far.

  I have a Deskjet 6540 who has always worked very well. I recently bought a ph5712 duplexer. The duplexer has been installed quickly and immediately, I tried a double-sided printing in Win7 x 64 RC1 using a multi-page document in Word 2007 SP2. To print I clicked on print, then went in the properties and choose duplex printing in the drop-down box. I then in the same window below the drop-down list to change the setting to print 2 sides of manual, automatic, but automatic was not available. Then, the document printed with manual duplex printing. The printer driver is unclear of the duplex unit.

  Then I'm gone in done printers & devices, right click on Deskjet 6540, selected printer properties, click the device settings tab. Under the heading Installation Options, I saw that duplex unit has been set to not installed. I changed to installed and tried again the above printing method. This time, automatic was available to choose for printing 2 sides. When printing, I got an error message indicating that the printer does not have a duplex unit installed and offered to print with manual duplex printing. I cancelled and the printer to check the connection between the duplex unit and the printer off.

  I pulled the duplexer from the back of the printer to check to see if the electrical interface on the duplex unit that connects to the printer has tape on it or something to protect it during transport. I did it with the understanding that if there is not a successful connection between the duplex unit and the printer then the printer and the OS do not know that the duplex module has been installed. There was no tape, the connection was fine and appearred to be complete. However I noticed that the duplexer had 4 points of contact, while the printer was only two, which suggests maybe the duplexer is not made to interface with this printer. However, I realize that this duplex module is designed for several models of printers, then perhaps this particular printer model uses only two contact points. The box of the duplexer is said expressly that is compatible with the 65xx Deskjet printers, yet I can't get the printer (or maybe Win 7) to recognize the duplexer is installed. An incorrect interface has been installed on my DJ 6540? I can provide pictures if that helps.

  I tried the method of printing, this time with Adobe Reader 9.0.1 so nothing doesn't. Still, the automatic option was unavailable for printing option 2 faces. I went to the properties of the printer in Control Panel > printers & devices and this time it would not let me change duplex unit installed not installed to installed. Is there a driver problem?

  Any recommendations? Otherwise the printer works fine in Win 7 and has always worked in x 64 Vista and XP. This is the first time I've ever had problems with it.

  EDIT: Added some info.

  EDIT: Revised for clarity.

  EDIT: It seems that every time I change installed Duplex not installed to installed, then go to print in one program, select properties and select in the drop-down box, installed Duplex duplexing varies automatically installed to not installed. This suggests that the printer driver communicates with the printer and the printer responds that the duplexer is not installed. Thus, it appears as the root of the problem is that the printer or the printer driver does not recognize the duplexer. Is there a utility available that will allow me to speak with the firmware to see if it is the printer or the printer driver who thinks that the duplexer is not installed? And is it possible for me to say if the duplexer is DOA (dead on arrival, a faulty device)?

  System Specs:

  Win 7 x 64 RC1

  Intel Core 2 Quad Q9660

  Gigabyte EP35C-DS3R motherboard, Intel P35 chipset

  4 GB OF RAM

  ATI Radeon 4850

  2 x 500 GB on-board Intel RAID 0, WD, Seagate 1x750GB 2x1To.

  Creative X - Fi Fataility PCI

  Message edited by oliaseleven on 09/14/2009 09:00
  Message edited by oliaseleven on 09/14/2009 17:35
  Message edited by oliaseleven on 09/14/2009 17:58
  Message edited by oliaseleven on 14/09/2009 18:09

  A phone call with things cleared up HP technical support. It turns out that the only printer that they currently have "compatible with Windows 7" is the Photosmart C4700 and automatic duplex printing does not work on it even if she has a duplexer and he is allegedly "compatible". So, essentially, that HP has suggested that I have to buy a new printer then, get this, I still can't have automatic duplex printing. Pure genius on their part. They were friendly enough, but their support persons were predictable as helpless as the others I've met. I have a feeling that if Win 7 is released to the general public next month that their drivers Win 7 will allow this unit front back working as it should. I can only hope, of course, because it's too late to go back.

  Message edited by oliaseleven on 19/09/2009 22:36

• DeskJet 6540 + Win7 64 bit: time to throw this printer away?

  Thanks HP for no more Toolbox. Having just installed one of your dear #97 cartridges, both cartridges are clearly NOT aligned, this text is blurred. Of course, I'd love to align the cartridges but on my new office (made, ironically, by HP), there is no way to do it.

  This forum dear colleagues, I am simply out of luck?

  Thanks for any help.

  Good news. With the connected to old Dell XP 6540, I was able to do a manual cartridge alignment. Now my PDF sample prints with good quality (not obvious blur or ghost), on old and new PCs.

  And say that I was planning to get rid of the old machine... not so fast