HP Deskjet D4260

Similar Questions

• Where can I find the download of the base for a HP Deskjet D4260 printer driver?

  Where can I find the download of the base for a HP deskjet D4260 printer driver? I have a new Windows 8 tablet running, and the only thing I can find is downloadable for the complete software suite.  References from the HP website they have a base driver download but you don't tell where.  Search all of lead them to the download of the complete suite.

  Hello eworth3,

  I followed on the specific page for this driver and found the same thing - my apologies that there is not a link on this page for basic training.  I did a search on the site hp.com for this text and it took me to a page that has the base driver... I have included the link below.  This is the basic feature software solution and is a driver software intended only to users who want a basic print and driver scanning for use with their device from HP all-in-one.

  Thank you for that bring to our attention: I would ask to add the link to the specific page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109012-2 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0001

• HP DeskJet D4260: HP DeskJet D4260 printing blue black Navy

  RE: Black text print in Navy Blue; DeskJet D4260

  Hello

  I'm having a problem similar to this person, here: http://h30434.www3.hp.com/t5/HP-Connected-Mobile-Printing-and-Cloud-Printing/deskjet-D4260-incorrect...

  ------------------

  My operating system is Windows 7, and if I finish a "Test Print", or "clean" cartridges (same output result), these are the only times where black will print correctly...

  In all other cases, black text print in Navy Blue; -whether a Microsoft Word Document, or PDF.

  I recently would be to run out of ink and had installed remanufactured cartridges of "Printronic; I don't know if this caused the problem...
  My printer has rejected the cartridge Black Remanufactured 74 (traffic lights flashing), and so I replaced it with a cartridge "official HP 74'; my printer accepts... However, the black ink won't even print a...

  The other cartridge I use is a revised cartridge "color 75' (not an official HP 75 One).

  Any suggestions on how to solve this problem would be appreciated.

  Until then I thought changing the cartridge with HP 75 official; and after that I plan to reinstall the printer drivers.

  If I remove the color cartridge, nothing prints instead of black text at all.
  Will result in a blank Page.

  Help, please.

  Hello @DFF_1_HP,

• Download software hp deskjet d4260 printer

  I have an apple laptop and you want to set up the printer above.

  HP has a download of software for apple computers so that I can use my deskjet d4260?

  If you would have told me your version of Mac OS X I could have pointed out it a more specific page.  This , you should get close.

• DeskJet D4260 and Vista - can't save property changes

  Have Vista Home Premium on an HP computer and use a HP Deskjet D4260 printer.

  I go into the printer properties and set them so that the printer will not use the color cartridge, but use black ink only. It works for a single document, but the next document, it goes immediately to the use of the color cartridge (in such a case, I think that it also uses the color cartridge to black, which is a terrible waste of ink, but profitable for HP).

  Whenever I changed the properties of the printer to print with black ink only, I made sure that I have 'save' or 'apply' settings. The system refuses to keep the black-ink settings only.

  This happens if the documents are all in black only, some color or all colors.

  This happens regardless of program I can print: browser (IE8 and Firefox 3.5.1), word processing (Office 2007, OpenOffice 3.1) or anything else.

  How can I force the printer settings to save and stay put to use black ink only? The driver files that I have to hack and how?

  Thank you

  Moxieman

  Hello moxieman,

  To change the default print settings, change it in the Printers folder printing preferences in the control panel: open Printers, right-click on the D4260 (should be called Deskjet D4200 series I think) and then click Printing Preferences.

• HP deskjet D4260: OS 10.9.3 and HP D4260

  I would like to install a driver for HP deskjet 4260. It does not appear in my update of the apple software. The printer appears in system preferences, but nothing is printing. Is it possible to reinstall the printer software?

  Hello

  Follow these steps to uninstall the printer driver, which is expected to get resettled drivers:

  1. From the desktop, double-click the Macintosh HD icon.

• DeskJet D4260

  I downloaded thre last updated and now my printer does not print.  White pieces of paper out. Alec

  Hello

  Try following the instructions below to configure the diagnostic utility. This can help to solve issues such as printing blank pages.

  http://support.HP.com/us-en/document/c02114788

  Does that help?

• Pavilion a6350z: driver printer deskjet 4260

  Update software from Vista to Windows 7, but can't find a printer driver for my Deskjet D4260. HP does not list one.

  Any help out there?

  UH? Those is a few years old! Is no longer a problem for me, there was one that I remember most?

• Printer prints when it wants too

  When Sandy Hurricane through we had very little energy, so when the electricity company tried to get the power to full power the printer would activate itself. After 3 days of listening to the printer turns on, I unplugged it. Two weeks later, when we had the power cable, internet, back on, I plugged it in and was able to print this day here. Now, it's like the title says"it prints when he wants to." I would tried to print something now, and it's as if the printer says "I have not thingk so" or "not today".  I have a hp deskjet d4260.

  I'm sorry you have a problem with your printing. The blackout have damaged the printer a sort of way.

  You can try to run the doctor print and scan and check the result.

  http://support.HP.com/us-en/document/c03275041

  How are you connected USB? If so, try changing USB cable and see if that makes a difference. You can also uninstall and reinstall the software and drivers.

• I have windows vista, my printer is working paper is fine, but nothing is printing on paper there is ink.

  just installed my hp deskjet D4260 printer as I said it is running, the document is fine, but nothing good print on paper.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• what current hp printers use ink of 350 and 351?

  I have a Photosmart C 4480 all-in-one printer (2 years) and use Windows XP (original version).     My printer developed problems that seem to not resolvable.

  Problem is that I have a large stock of 350 and 351 for this printer ink cartridges.

  Would prefer to find the new HP printer that uses cartridges 350 and 351.    Y at - it all?

  Have you tried checking HP site but there is no info under "product spec" what type of cartridges are used.

  There is also the additional problem in what, to search eBay or Amazon, there not much info on cartridge type on any printer for sale.

  In addition, I have a horrible feeling that HP may use different model numbers for different countries.     I am in France and cannot find all printers HP French who seem to use cartridges of 350 and 351.

  Any help to guide me in this confusion would be very much appreciated.

  Cordially tifossie

  Hi there, it may be difficult to source a new HP inkjet printer that will have these cartridges that they were released in 2007. Here is a list of templates that should accept these multi-format cartridge numbers.

  HP Deskjet D4260 Printer (CB641A)
  Printers HP Deskjet D4360 (CB700A)
  Range of all-in-one printers HP Officejet J5780 (Q8232A)
  Range of all-in-one printers HP Officejet J6480 (CB029A)
  Printer HP Photosmart C4280 all-in-One (CC210A)
  Range of all-in-one printers HP Photosmart C4385 (CC281A)
  Range of all-in-one printers HP Photosmart C4480 (Q8388A)
  Printer HP Photosmart C4580 all-in-One (Q8401A)
  Range of all-in-one printers HP Photosmart C5280 (Q8330A)
  Range of all-in-one printers HP Photosmart C5580 (Q8341A)
  Printers HP Photosmart D5360 (Q8361A)

  You are better of chance may be to find one on eBay but answer you it's a new night and not one already used from a different part of the world, since it cannot accept your 350/351 supplies because they are regionalized version EMEA of these supplies.

  Good luck.

• Print size.

  I have a deskjet D4260 installed on Windows XP Home Edition.  When I print from some Web sites, the print comes out very small and almost unreadable.  Other sites, it comes out normal. I can't tell in advance which sites will print normal and will not lower case. I tried various "adjustments" but nothing changes.  My previous normal HP printed size all the time.  Is this a site problem or I do something wrong?  I'd appreciate some insight on this question.  PS - I'm pretty new to computers, then you will appreciate help that is not too technical.  Thank you.

  It is a problem of Web site. When designers Web page design web sites, they defined the size of the police, and when you print, it will be printed in the same size. What you could do is to copy the text and paste it into a text editor such as Wordpad or Microsoft Word. Then increase the size here and then print it.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day