HP diagnostic loop

Similar Questions

• slow PC

  I have a hp h8 - 1080t for 3 years, "just out of warranty." it worked windows 8 pro sinceabout 4 months after it came out, here are the specs:

  HP H8 - 1080t

  I7 6core @3. 2 ghz

  1.5 to sata hd

  System 12g RAM

  NVIDIA Geforce gt 545

  PS 600W

  the system worked well until 2 months ago. I complained to hp I was experiencing crashes in 3d using photoshop. They suggested updating the driver. Well I did and that's all down.

  The driver blew my profile. I did a clean install of 7 to 8. all my programs run, but for some reason some starange programs take longer than usual until I can use them. Also when the system starts it takes longer than usual to reach the log in the command prompt. After that the player moved up to 7 minutes, which was less than a minute

  Any help to solve this will be greatly appreciated. TIA

  Hi cyberwasp,

  Check the amount of memory that your PC has discovered verses the amount installed.  If this isn't 12 GB, then you have a problem.

  Run a complete diagnosis.  If you can run a memory diagnostic loop, do it for at least 30 minutes. The below memory diagnostic is an excellent tool.

  Try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  Memtest86 4.20 more Installer USB.

  If you have updated your video editing software, consider trying the older version with the previous settings.  If the program has made to the verses of memory made the disk, then plans to use memory if the file is not too large.  Use a known good free video file corrupted in the format that allows to load quickly.

  The 545 NVIDIA would not be my choice for 3D video editing, especially if the video is HD. It is not so much about the performance of the card, but the size of the frame buffer memory.

  You might consider testing your editing under Windows 7 with the video driver program and the video editing software that is know to work forward to Windows 8.

  Use a can of compressed air to blow off the dust of your PC. The heatsink from the CPU and video card would be two places to ensure that they are free of dust as would the vents.  Do not place your PC is a closed air space heat causing the electronics to reduce.

  Check the level of the bios of your PC against what was posted by HP.

• El Capitan 10.11.4 updated: loop with "unexpected launchd sigkill.

  MacBook Pro 5.2 mid 2009 with 8 GB memory updated to the version of El Capitan 10.11.4 from the app store.

  Starting after the initial installation stage goes into a loop of reboot with the message above appears black behind the initial grey screen.

  Reinstalled the previous operating system and tried the 10.11.4 install again - same result.

  I noticed several instances of this problem on various hardware systems reported on other web sites.  What would be the right way to collect useful diagnostic information?

  Thanks for any help.

  Two iMacs does not start after the 10.11.4 update

• Timed loop continues to turn after stop

  Only, I have seen this time, but thought I should ask about it.  After pressing the stop button, I was surprised that the diagnostic LED on the front panel of the main vi kept flashing.  With the performance highlighting ONE values showed that the timed loop was still running.  I checked the other 8 loops clocked subvis and they also ran. None of the methods Stop worked. Only stop LV and abandonment of the cRIO eliminated the problem.

  Run LV2014 SP1 on cRIO-9067 with dual-core ARM processor.  Windows 7 x 32.

  BTW: The function of the check LED VI scale does not work on this device.

  You must allow an order any to be able to stop your curls.  A simple global variable would work well here.

• Save all the data for a while loop

  I already asked a similar question, but it is perhaps not very clear, and there are a few concepts that I did not understand.

  1. I have a keyboard to generate flow DTMF signal (I call it stream because it contains several shades that consist of a full phone number)

  2. I would like to save it as a wav file, but I guess that another format is correct and because the writing on a wav file does not support add so for this particular case, I use writing waving instead of writing to wav format

  My approach is to have a structure of queue so that I can write each iteration results in a file.

  (i) when I try to retrieve the data, there's nothing but 0.

  (II) my intention is to get 8000 samples per second (fs = 8 000) but he back up data so fast

  I have attached the file so if there is a way to solve problems, please help me.

  This vi includes many elements discussed above. There are no provisions for the intervals 'no signal '.

  Changes: Replaced with native features of LabVIEW Mathscript node. Mechanical Action to latch release button.  Cluster to array replaces Unbundle and table to build. Reshape the table to match the shape of the keyboard. Separate searches for frequencies of line and column. Note that this is easily extensible to handle the 4 x 4 keyboard. Structure of the event added. Added the stop command (but not implemented stop to the loop of the file). Added indicators for diagnostic purposes. Added FFT spectrum and graphic.

  I disabled writing to part of the file for testing.

  Lynn

• How can I fix my internet connectivity problems: entry msafd tcpip tcp provider ip could not perform looping simple communication

  WinSock diagnostic

  WinSock status
  info all base service provider entries are present in the Winsock Catalog.
  channels of information the Winsock Service provider are valid.
  error entry MSAFD Tcpip [TCP/IP] provider could not perform the looping simple communication. Error 10055.
  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info entry RSVP UDP Service Provider provider passed the loopback communication test.
  error entry RSVP TCP service provider provider could not perform the looping simple communication. Error 10055.
  connectivity error problem exists with an installed LSPS.
  repair automatic action: WinSock Reset catalog
  action completed successfully: netsh winsock reset catalog
  the information system required reboot
   
  Diagnosis of network adapter
  Network location detection
  Info to help home Internet connection
  Identification of network adapter
  Info network connection: name = Local, Device network connection = Intel(r) 82566DM Gigabit Network Connection, MediaType = LAN, type = LAN
  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394
  Info network connection: name = Sprint PCS Vision, peripheral = Palm Treo Modem, MediaType = PHONE, type = NONE
  Info Ethernet connection selected
  State of the network adapter
  Info network connection status: connected
   
  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity
  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12017 connecting to www.microsoft.com: the operation has been cancelled
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
  [/codebox]

  Hello

  You did changes to the computer before this problem?

  Try the steps and check them out below:

  a. open internet explorer.
  b. click on tools > Internet Options.
  c. click on the Connections tab.
  d. click the LAN Settings button.
  e. uncheck all options on the shortcut menu.
  f. click on the OK button.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-12029-in-ie-8/47a865dc-3237-4e07-84a9-d9fb20a766e3

• Startup Repair loop - cannot start Windows

  Hello

  I have problems with repair system continuously in a loop and it is not letting me open my computer.
  Once he arrives, he works to try to find a problem and then can't find the problem. It is said "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer.
  I don't have anything fixed, but I will tell when it first happened, I got my attached flash player. Since then, it is not attached.

  Here are the details of the diagnosis of start-up and repair repairs:

  Journal of diagnostic and repair repair startup
  -----------------------------------------------------
  Last sucessful start: 2010-05-24 04:31:12 (GMT)
  Number of repair attempts: 18

  Details of the session
  --------------------------------------
  System disk = \Device\Harddisk0
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  ---------------------------------
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 16ms

  The test is performed:
  -----------------------------------
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 140ms

  The test is performed:
  --------------------------------------
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 141ms

  The test is performed:
  --------------------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Time taken = s 280ms

  The test is performed:
  --------------------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 110ms

  The test is performed:
  --------------------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62ms

  Root cause found:
  ------------------------------
  Startup Repair tried several times but still not determine the cause of the problem

  --------------------------------
  --------------------------------

  Then he repeats the same thing 3 times...

  I tried to do a system restore did not work.
  I tried to start with last known configuration work. Did not work.

  Does anyone have an idea what I can do for the next step and how to fix this?

  I installed SP2 less than a week ago, and I was working on a problem with the malware as well when this happened

  Any help would be appreciated!

  Thank you

  Lucas

  Hi lschoen114,

  Remove all CD/DVD and restart the computer. Press the F8 key as soon as you start it again, until you reach the Advanced Startup Options menu. Select disable automatic system failure reboot so you can enter the code of stop error when startup fails.  View the details on the screen.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Continuous loop stage 3 of 4

  My computer is permanently stuck in step 3 of 3 loop of update, I have tried pressing F8 and safe mode, repair your computer, and start windows normally, but keep going back to the loop. Hard drive through an occasional clicking sound what she usually never does. Any help gratefully received, but please keep things simple!

  Thank you

  Hello

  Rattling are a bad sign in a hard disk and normally indicate that they fail.

  Go to the website of the manufacturer of your computer/laptop > find specifications of hardware of your computer/notebook (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic on the computer software lets you get here > make a Bootable disc > test your hard drive.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the hard drive is OK, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Vista UPGRADE LOOP causing has major problems after normal recovery help

  I have a Pavillion DV6226us computer laptop Vista Home Premium, 4 daus agp, I was forced into what I thought was a restart systematic due to some updates to VISTA & OFFICE until he got to the page config after the windows logo screen and update 3 or 3 remained at 0% and restarted and went into the loop of the startup-config-stop. I have had no other internet access at the time, but I needed the pc work so I tried options repair normal, start repair, latest config, safe mode, etc. and eventually had to do system restore, System Restore did not work, I tried 3 times I think and I know I got an error message 'cannot restore again or something' I went to the oldest available restoration and still got the update config, I deleted all the files of 3 updates in the software distribution folder, I thought this might work, I forgot pending .xml and restored then the register for a few days before the first update of Windows and nothing has worked.  I then tried a repair install and I have a windows vista business upgrade I bought that I never ended up using so I tried, but he wouldn't take the key not connected to windows, I put in the key OEM and it took, but I cancelled before starting installation cause I wanted to make sure that it was my only option When I had another pc, the next day, I found the pending.xml repair that I finally in windows. When I walked into windows, I found that there are all sorts of problems, from 1st installing office began to install but stop with the registry permission errors, I had 2 program files & program data folders (I moved the new ones to the old ones deleted duplicate files, the system was very slow I ran sfc and came back with a couple of errors that are not fixed, I watched cbs file but nothing came back under a ': can't fix "search of the file did not further that the errors were cause I had to restart with the repairs I did and run checkdisk, restart and decide if it is repairable or or try the upgrade installation , but the error of update 3 of 3 was back and now I was unable to boot from the disc, all I get is a white cursor with a black screen, I also tried 2 OEM windows vista home, & Xp Pro disk and a partition boot disk just to see if we can see the drive and it acts like its reading every time but after about 20 seconds to 2 minutes He let the fast blinking cursor and goes to loading vista, I can get into the bios, I can run all the advanced startup options (safe mode, etc.) but even a mistake. I tried to start with different bios settings and I tried to reset to default Panel of the bios, Ive tried hard reset - unplug all removin battey, by holding down the Start button / stop. Now, I've noticed a new screen coming during the load just before the screen of windows logo appears a black screen with 1/186 (_0000000_00000 CDF - MS) for 1 second and the only startup option that got no result was the controller of directory service. When I was able to run the checkdisk utility and found that this same file CDF - MS rode as error and checkdisk supposed to solve this problem, when I run the directory service again right after that it arranges the checkdisk says disc is clean, but it turns very quickly, just about 5 seconds to run checkdisk, then if I try to boot from the disc or other options of connection the error wil come back
  and loop fixing and showing his own. Ive also ran the vista test drive diagnostic memory hard tool & bios, both tools ran without error is returned without error, there was something else that happened during one of the attempts of safe mode, do not know how I got ut open winload.exe screen but I do not change anything Please help thanks

  When you did the repair system/upgrade using the version upgrade of the Installation of Vista Business disk, which was the operating system that was on the system before the problems started (before that you did the re-Setup)?  If not and you have used the OEM product key, it triggered correctly?  Go to start / computer / system properties and at the bottom it says it is active?  That is not an immediate problem, but can backfire on you in 30 days if it is not resolved.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that this is the same PC.  They should give you a code to enter on this screen to activate Vista (as long as it's the same version of fix than the OEM version).

  I guess you can still work in SafeMode with networking (but not normal mode).

  We will test your hard drive, a different way.  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  I want to update the drivers for the CD/DVD device (because it seems to be in place, even if it worked at least partially for the repair of the system).  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Then see if you can run another repair of system/upgrade to Vista Business upgrade disc.

  If the update 3 or 3 error always appears after that, then repost this question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where people who specialize in updating the questions will be more than happy to help you with your problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Application log error - infinite loop possible

  Here is the error. I guess that I have a callhandler with a possible infinite loop, but I don't know which one to look at. How can I go on this stalking? I looked in DOHprop, but didn't know where to begin the search.

  Event type: error

  Event source: AvConvMsg_MC

  Event category: error

  Event ID: 10020

  Date: 06/04/2005

  Time: 08:31:48

  User: n/a

  Computer: UNITY01

  Description:

  [0x00000FF0] thread loop Possible infinite, AvCDEConvBase::Run (), detected in [PHGreeting]; Subject = 03: {EEB05E0F-837F-4C7F-9040-DA1A14C89C34}

  You can use the Explorer to data link found in the depot of the tools under Diagnostic tools. Select the ID of the object to find in the menu file and paste into {EEB05E0F-837F-4C7F-9040-DA1A14C89C34}

  Kind regards

  Eric

• Apple stores in the Canada, they do a free diagnostic as in the USA?

  The stores Apple, service engineering, doing a free diagnosis, as they do in the USA?

  Are they reliable - can - we be assured the job is really necessary?

  As far as I know, all the Apple stores on the planet will be a free diagnostic. They are as reliable as any diagnostic test may be on modern hardware. They do not catch everything, but they tell me will be most of the time. With respect to the work that is actually necessary, based on the results of diagnostics, Yes. It is necessary. Apple employees are not paid a commission or incentive to recommend unnecessary work somehow.

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.