HP Envy 15-u010dx: touch the glass of the screen for HP Envy 15-u010dx

Similar Questions

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• Google search results disappear after flashes on the screen for about one second.

  When using advanced Google search (http://www.google.com/advanced_search), the result will Flash on the screen for about one second, then I don't see that a screen is empty. Pressing 'Enter' again once does not change this white screen. It started there, at the time, that I've upgraded to Firefox 10.0 approximately two days. This problem could be caused by the Firefox update? When I use the Google Search base (https://www.google.com/webhp?hl=en), I don't have this problem. My OS is Windows 7.

  I'm glad to have helped, this thing sometimes works with General problems with Web sites and therefore often worth a try.

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.

• Can you please provide me with the part number for the screen for model #: NX. SHKAA.001?

  Can you please provide me with the part number for the screen for model #: NX. SHKAA.001 (AO1 - 131 M-C1T4)?  The first ten digits of the serial number are NXSHKAA005.

  Matt or gloss is what it looks like. Some like not brilliant but because most are a reflection. I would say that they would work as long as the resolution of the size and the backlight are the same.

• FDM hangs on the screen for editing during import stage

  When users try to import files via FDM, they see on the "Processing" screen... "and it seems to be time or something because it will stay on the screen until the user does something to refresh the screen. He also seems to be a problem when a user attempts to export a map to Excel, the screen for editing also blocks and I see on the side server that the file is created, but the user never receives a prompt to open or save the file locally. I tried both of these processes on the server and this problem does not exist.
  
  Data sheet: Win server 2008 R2, SQL Server 2008 R2, IE 8
  
  I already tried the following:
  
  Checking the settings IE timeout in the registry
  Verified that smart was not installed on the server of web app/FDM
  Verified users are using the correct URL: \\fdmwebserver\hyperionfdm
  
  Any suggestions?

  Check whether the Antivirus Firewall is activated on the workstation as Symantec or Mcaffee

• How we split the screen for different horizontal and vertical divisions

  Hello
  
  How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(
  
  so I would like to know how to do division without panelSplitter.
  
  Thanks in advance,
  Jyothi

  Hi Jyothi,

  If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

  Kind regards
  Amélie Chan

• Why my IPhone 6s unresponsive when I touch the screen?

  Very often when using my phone it becomes inadmissible to the touch, gel and not responding do not at all.  It seems to be a random thing that affect all apps/screens. When it happens, the only thing that seems to work is to turn off and on again.  I was told to turn it off at night, but that did not help.  It's only 1 month warranty.  :-((

  Greetings, Goldilocks,

  Welcome to Apple Support communities. Leave your post, your iPhone 6 more on iOS 9.3.4 becomes sometimes does not and you need to turn your phone on to make it work again. I'll be happy to help you with this problem.

  If the screen of your iPhone, iPad or iPod touch does not respond to the touch --try them steps described in this article to make sure that everything works as it should.

  I hope this helps!

• How to detect the user touch and hold the screen for touch screen devices?

  Hello

  I want my code to do the following:

  when user touch and hold on the screen{
      myThread.start();
  }
  
  when user release the finger on the screen{
      myThread.done();  //a method to stop the thread
  }
  

  Any ideas? Thank you very much

  Never to change never return super.touchEvent (...) to return true (well, you can do it for complete events such as MOVE or GESTURE. SWIPE_...) -you will disrupt the event processing complex (just about everything, but downwards and upwards).

  The code works for me (I do something else, with more visual impact, so I know for sure that it does). One thing, try - check the status of your Thread (isAlive()) before you start, as DOWN seems to be generated twice.

  If you could be more specific with what "won't work" is, I would be able to help more.

• Firefox closes spontaneously when I haven't touched the pc for a while, usually at night.

  As above. When I restart Firefox it always opens in the same position on the screen and the same window size even if it wasn't the last position/size when I left it.
  This isn't an accident, it disappears.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• reduction of severe frame rate when you touch the screen, iOS

  Hello
  I have a simple app with scroll to the top of the stage with a bitmap image in each of the clips of 2000. They are moving incredibly fast at 60 fps.
  But the moment that I even put a finger on the screen the fps drops to about 40 if I move my finger it drops to 30 fps.

  is this a normal behavior?

  There is no listener of events or something like that.

  Thank you :-)

  I did a couple of things that have improved the framerate:

  mouseEnabled = false;

  mouseChildren = false;

  No movieclips, only bitmaps, perhaps of sprites.

  If you use clips for controls, make sure that they are not nested in a different movieclip that covers the entire screen. (avoid nesting where possible)

  delete text text_input fields

• Upgrade of the screen for Dell xps 13

  Hello

  I own Dell xps 13 l322x (2014 model) and I consider that the upgrade of the screen.

  My screen current resolution 768 * 1366, not touch, and I wonder whether it is possible to upgrade for screen resolution superior touchscreen or both :)

  My current screen connector tag is D13 LVDS, and from what I've seen so far, the higher resolution connector tag is D13B.

  Thank you!

  Hi Tzion,

  It's all full LCD screen I mentioned which has the same physical dimensions as your existing screen. If there are questions most kindly send the serial number of the system via private message so that we can check the specifications of the system.

  @Ejn63,.

  Thanks for sharing your entered Mr.

  Kind regards

• How to set the size of the screen for sensitive design mode?

  Previously, I was able to select one of several sizes of standard screen for sensitive design mode when you test a Web site, but can now only to select a size. Why and how can I change this?

  The drop to the bottom of the list in the display of delicate design is empty?

  You have a pref devtools.responsiveUI.presets the topic: config page?

  If this is the case, then try to reset this pref to get the built-in default presets.

  • http://MXR.Mozilla.org/Mozilla-release/source/browser/devtools/responsivedesign/responsivedesign.jsm

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Sometimes then stops working and has an hourglass on the screen for a few minutes, how do I speed it up?

  Some sites... The hourglass flashes on my screen and load custom pages.
  It won't let me even scroll to the bottom of the page.
  Finally, I get the message...
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. »

  Is there something I can do?

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• part of the screen for the extreme left, below horizontal toolbars have become "bookmarks". I have no command or request it. I can't seem to remove

  The column appears under the horizontal toolbar that shows the window of google search and web address. I tried left and right click without result. How to restore the screen firefox where all of the horizontal space is occupied by the web page, I select?

  Hello NEWBRU1, it sounds as if you have selected the bookmarks sidebar is displayed. Just click on the "X" on the top right to close or press the keyboard shortcut ctrl + B...

• Why can I not use whatever it is at the top of the screen for Mozilla Firefox 11?

  I can not use the top of the screen and so I had to go back to using internet explore instead.

  There are several extensions that have been known to cause this problem (Yahoo toolbar for one I think).

  Can you start Firefox in Safe Mode, and we can see if it works there? If so, you can start Firefox in normal mode and disable your extensions one by one until you find the culprit.

  If it doesn't work, let me know and we can figure out what might be causing the problem.