HP Envy 23 display: no sound: Macbook Pro (retina) with HP monitor

Similar Questions

• Games on Macbook Pro - retina with AMD M370X 2015

  New to Macbook Pro laptops. I bought 10 TIA for frames here at my job and supported more than 2 years now.

  Bought a new Macbook Pro the retina with the Radeon M370X graphics option 2015. I'm used to the game on Windows laptops and I have a question regarding battery drain.

  Run these computers laptops always battery? HP, Dell, etc. I could take out the battery and it will run strictly on the current.

  I ask because once I have Steam to load and install a game, I can play for about 45 minutes, while it is plugged in with the original 85W adapter, until the battery is at 5%.

  This is normal behavior for this laptop?

  Certainly, you can run the MBP with the charger connected even with the battery disconnected.  I don't recommend that because the OSX will be butterfly of the CPU and performance should be degraded.

  Wohl wrote:

  I ask because once I have Steam to load and install a game, I can play for about 45 minutes, while it is plugged in with the original 85W adapter, until the battery is at 5%.

  This is normal behavior for this laptop?

  What do you use must be a serious resource hog.  In rare cases, when the charger is plugged in but additional power resources are needed, the battery is charged for the difference.  This is perhaps what is happening.

  Try a SMC reset and see if there is a difference:

  https://support.Apple.com/en-us/HT201295

  Mac never had a good reputation as game machines.

  Ciao.

• MacBook pro retina display (mid-2012) goes black

  All by using the computer to randomly screen goes completely black.  After a few attempts at tapping trackpad or a bite or two, screen turns on but then log on to the computer. Program I was running is still there and continues on. It is very random and I fear that a logic board or the video card component may be out.  MacBook Pro retina display mid-2012, 16 GB 1600 mHz DDR3 RAM, graphics NVIDIA GeForce GT 1024Mo of 650M;  2.6 i7 running OS 10.11.2

  Hi James,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. I'm a bit ambiguous on the screen exactly who you see when you log in, but according to your description it looks that your computer may be involuntarily go to sleep. If this is the case, you can find the troubleshooting steps in the following article useful:

  If your Mac does not sleep or wake up when expected - Apple supports

  As mentioned in this article, another possibility on laptops like the MacBook Pro is that the screen closed sensor may be triggered unintentionally. There is a small magnetic sensor in portable computers and sometimes, being close to things like briefcases magnetic closure or magnetic jewelry can cause him to think that the display was closed, which then puts the machine in a locked sleep state. If possible, you can test the issue on an office open without any potential source of interference.

  Magnets in devices could cause sleep your Mac computer - Apple Support

  See you soon

• CS4 on macbook pro retina display

  Hello, I just downloaded (purchased about 2009) CS4 on macbook pro (2015) with the retina display.  Perhaps because CS4 is old, when I ope PDF using acrobat pro that came with CS4, PDF content looks blurry (the same PDF document opened by a snippet that came with macbook pro shows very strong police force).  Do you know what I can do about it?

  Also, do you know if I can improve more current CS4 CS5 or CS6?  How to upgrade my CS4 is?

  Thank you

  CS4 is old enough that I don't think that there is nothing you can do to improve the display

  CS5 is no longer marketed, and CS6 no longer upgrade pricing

  In fact, as much as I know, same-CS6 won't do well on a modern screen 'high resolution '.

  All development efforts now targets Cloud programs, which are available by subscription

• my macbook pro retina display will not download large files

  I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

  Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

  So far I have not seen this question arise with someone else.

  The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

  MacBook Pro (retina, 15 inches, end of 2013)

  10.10.1 Yosemite

  MacBook Pro, Mac OS X (10.7.5)

  Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

  If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

  Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

  If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

• I can't connect my headphones on macOS / Macbook Pro retina

  Hello

  I can't connect my headphones (Bose SoundSport headphones) on macOS / Macbook Pro retina. When I look for them on the search list of bluetooth, I can find and pair, and even if it says its connected, it does not appear on the list of the sound source. Can someone please help me to implement?

  Thank you very much

  -Rachid

  Hey rashidansari,

  After reading your post, it seems that you are able to pair your headset Bluetooth for the Mac, but it is not appear correctly. This article may be able to help with that.

  OS X El Capitan: If your Bluetooth headset does not work

  Thank you for using communities of Apple Support.
  Good day.

• MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  Doesn't look like 4K is a good option.

  /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

  Graphics.html #extdisplays

  Built-in display:

  15.4 "Widescreen

  Native resolution:

  2880 x 1800

  Details:

  This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640. See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

  2 screen support:

  Double/mirror *.

  2nd Max Resolution:

  2560 x 1600 (x 2 *)

  Details:

  * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

  Although I think I read some hacks to make 4 K @ 30 fps.

• Multiple poster on MacBook Pro (retina) end 2012

  Hey friends,

  I'm trying to put up in my office and I would like some insight or feedback if the following configuration will work for me.

  I have a MacBook Pro 15 "with the retina display (end of 2012) and want to connect:

  2 x 29 "Samsung Ultra Wide monitors LS29E790CNS/EN (http://www.samsung.com/uk/consumer/it/monitor/curved-monitor/LS29E790CNS/EN) 2-port Thunderbolt on my laptop over a 3rd Samsung TV UE40JU7000 (http://www.samsung.com/uk/consumer/tv-audio-video/televisions/uhd-tvs/UE40JU7000 TXXU) via the HDMI port on my laptop."

  All these will be connected through the horizontal Hengedock dock (https://eu.hengedocks.com/pages/horizontal-macbook-pro-retina)

  This configuration will work as I'm a believer or would I have problems? Anyone tried this configuration that could give me your comments?

  Thanks in advance for any help you could give me.

  Hello Jofcom.

  Thank you for using communities Support from Apple. I see that you want to use your MacBook Pro (15-inch, mid-2012 retina) with several external displays. I would like to help.

  I would like to share your MacBook Pro specifications techniques page.

  MacBook Pro (15 inch, mid-2012 of the retina) - technical specifications

  Graphics and video Support section indicates that your MacBook Pro supports up to two external displays:

  -Intel HD Graphics-4000.
  -NVIDIA GeForce GT 650 M with 1 GB of GDDR5 memory and automatic switching.
  -Double display and copy video: support simultaneous native resolution on the built-in display and up to 2560 x 1600 pixels on up to two external displays, with millions of colors.

  Have a great day.

• Reboots GPU - 2012 13 "Macbook Pro retina

  Hello.

  Recently had trouble with my 13 "Macbook Pro retina, end 2012 model.

  When you use safari (General Web pages or Youtube), the computer freezes completely and the sound (se) will be stutter. It will last for a minute until what the computer restarts automatically.

  I looked in the console and found this:

  
  

  Event: GPU Reset

  Date/time: Friday 20 May 22:29:54 2016

  Application: WindowServer

  Path:

  OS version: Mac OS X Version 10.11.5 (Build 15F34)

  Graphics hardware: graphics Intel HD 4000

  Signature: 813

  Report data:

  ===========================================================================

  Intel GPU Hang summary

  version 1.0.0

  ===========================================================================

  -Summary of the status for all THE rings-

  Ring MAIN is blocked in a lot buffer <-CAUSE DEEP!

  MEDIA ring is inactive

  Ring of BLT is inactive

  ===========================================================================

  Records of the key ring

  ===========================================================================

  -Ring MAIN-

  RING_HEAD = 0x00abe908 (offset = 0x000be908, wrap count = 5, wait_for_cond = 0x0)

  RING_TAIL = 0x000bfd60 (offset = 0x000bfd60)

  RING_START = 0 x 10204000 (offset = 0 x 10204000)

  RING_CTRL = 0x000ff001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 100 pages of 4 KB)

  -SUPPORTS - ring

  RING_HEAD = 0x00a0dc18 (offset = 0x0000dc18, wrap count = 5, wait_for_cond = 0x0)

  RING_TAIL = 0x0000dc18 (offset = 0x0000dc18)

  RING_START = 0 x 10304000 (offset = 0 x 10304000)

  RING_CTRL = 0x0000f001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 010 4 KB pages)

  -Ring of BLT-

  RING_HEAD = 0x00600b38 (offset = 0x00000b38, count of wrap = 3, wait_for_cond = 0x0)

  RING_TAIL = 0x00000b38 (offset = 0x00000b38)

  RING_START = 0 x 10314000 (offset = 0 x 10314000)

  RING_CTRL = 0x0001f001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 020 4 KB pages)

  -Other records associated with convicted ring-

  BB_ADDR = 0x10c10f4d (offset = 0x10c10f4c, valid = 0x1)

  BB_STATE = 0 X 00000000

  IPEIR = 0 X 00000000

  ACTHD = 0X10C10F4C

  EIR = 0 X 00000000

  EMR = 0XFFFFFFFF

  ESR = 0 X 00000000

  INSTPM = 0 X 00000080

  INSTPS = 0X8000020B

  UHPTR = 0 X 00000000

  -Slice commune INST_DONE register.

  Some common slice engines DO NOT.

  -INSTDONE_CS (= 0xffffff97): don't do not = HiZ, IZ, SBE,

  If anyone can help with this question it is greatly appreciated

  If it's a 15 "model then see: 2011 MacBook Pro Extension program repair the graphics issues. Or make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• remote work Apple MacBook Pro (retina, 13 inch, mid-2014)

  I was wondering if the apple remote will work with my MacBook Pro (retina, 13 inch, mid-2014) for displaying pictures, slideshows when connected to my HDTV with a HDMI cabe and and or play music in my iTunes library etc.or is simply designed for the apple TV?

  Hello..

  Isn't fear. Just Apple TV.

• 13 "Macbook Pro retina heats up on the bridge and google maps satellite

  Hello!

  I have a 13 "Macbook Pro retina

  I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

  Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

  I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

  Thank you!

  Hello there, villovsky.

  Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

  Reset the management system (SCM) controller on your Mac.

  Before resetting the SMC

  Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

  1. Press Command-Option-ESC to force stop any application that is not responding.
  2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by selecting restart from the Apple menu.
  4. Stop your Mac by choosing stop from the Apple menu.
  5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

  If you are using a Mac laptop, which is the power or battery issues:

  1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
  2. Stop your Mac.
  3. Remove and reinsert the battery, if it is removable battery.
  4. Restart your Mac.

  If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

  

  Indicators that need to be reset your SMC

  After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
  • The backlight on the keyboard not behave correctly on Macs with this feature.
  • The led State (SIL) not behave correctly on Macs with this feature.
  • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
  • The computer does not respond to the when you press the power button.
  • Mac laptop does not properly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • Battery does not charge properly.
  • The MagSafe LED power adapter does not have the correct activity.
  • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
  • Application icons can bounce on the dock for a while when opened.
  • Applications may not work correctly, or they may stop responding after the opening.
  • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  

  Reset the SMC on Mac Laptops

  First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

  If the battery is good behaviour

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  If the battery is removable

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Thank you for being a part of the communities of Apple Support.

  Kind regards.

• MacBook Pro (retina, 13-inch) screen resolution

  I have a MacBook Pro (retina, 13-inch) running Yosemite.  I'm QA test web pages and I need to determine what my screen (in pixels) resolution to report bugs to the development team.

  How do I know what's on my screen resolution?

  Select chipped, moving the cursor to cover each choice, resolution is displayed under the image of the laptop.

  

• MacBook Pro retina connection to HP 23xi problem

  Hello community,

  I was faced with a problem, I bought a 13' Macbook Pro retina. Not quite a cheap machine.

  But when I connect via HDMI to my HP 23xi , the screen becomes blurred and cut (which I was able to fix in the framework). I tried to play with the features, but simply, it won't be better.

  I presume this is because it is the retina, of course. But I bought this monitor, a very nice screen a month ago, and I will not sell it or throw it away.

  I bought this Mac for web design, but this isn't the result I was expecting at all.

  I saw another post on the RGB fix, although I have not tried because it's not very practical, my problem is not the color, but rather the resolution of pixellation that appears on the screen.

  What should I do?

  My sincere greetings,

  Luisvf7

  Looking at the specifications for the MacBook,

  Digital video output Thunderbolt

  • Native of output Mini DisplayPort
  • DVI output Mini DisplayPort to DVI (sold separately)
  • Output VGA Mini DisplayPort to VGA (sold separately)
  • Dual-link DVI output Mini DisplayPort to DVI dual link (sold separately)

  HDMI video output

  • Support for the resolution of 1080 p at 60 Hz
  • Support for the resolution of 3840 by 2160 to 30 Hz
  • Support for the resolution 4096 by 2160 at 24 Hz

  I consider using a Mini DisplayPort adapter to DVI dual digital video link Thunderbolt.

  You will not get the display resolution of 2560 x 1600 that your MacBook Pro is capable of on your HP display because the display is not capable of this. Specifications for display

• MacBook pro Retina worn

  Bought my macbook pro retina in 2014 and the display shows signs of worn out, even though I was very careful using this computer. Warranty has expired. Is there anyone who can advise me what I can do? Thanks Zoltan

  

  Make an appointment at an Apple store genius bar for a free evaluation.  There is no software solution to your problem.

  Ciao.

• MacBook pro retina bootcamp

  Everyone try to launch LabVIEW in bootcamp on the new Macbook Pro retina? More specifically, how the block diagram to watch full ground? Sharing of all other comments/experiences would be appreciated., for example how the standard fonts LV resemble different resolutions. Carsten Thomsen

  Just got a 13 inch MacBook Pro (early 2013 Version).

  Installed without any problems training camp.

  Windows 7 by default with the scale display 'Big' 150%, and this value gives a slightly fuzzy appearance.

  From my experiences, I suggest the following instead:

  Above the default setting (100%).

  Run the MBA to 1680 x 1050 screen. It is a good Windows 7 settings for the MacBook to the retina and adjusts well on minimal blur.  Boards prior to LabVIEW and diagrams are very readable and editable parameter to.

  For a Pixel Perfect restitution, you must run either 2560 x 1600 precisely half or 1280 x 800.

  If you have the eyes of an eagle (OR), 2560 x 1600 is a screen perfect beautiful pixel, but stuff is small.

  But, with an external external 24 inch 1920 x 1200, you get a nice size chart, but the best is with an external display 27-inch 2560 x 1600, which has diagrams LabVIEW very modifiable and readable and is also pixel perfect.

  So my LabVIEW setting recommended for Mac retina machines would be in 1680 x 1050 for the 13 "screen laptop (1920 x 1200 for laptop 15 inch (although I have not tried the 15" with this setting) and 1920 x 1200 for a 24 inch external or 2560 x 1600 for a 27 inch external.)

  Of course, you can also add an additional external display via the Thunderbolt # 2 port, also up to 27 inches / 2560 x 1600.  And if you really want to "pig" you can throw a third screen HDMI HDMI port.

  Happy wiring.

  Carsten