HP envy 4507: when you scan documents, they come with multiple scans

Similar Questions

• HP7510: When you print photos they come out the right size.

  Today you have the printer and it works well with the output of good quality.  However if I try to print a MS Word document that contains a picture the photo comes out to about 120% of full size and overflows out of the page.  Any ideas?  I am an experienced user and have tried all the usual remedies.  OS is Windows 10 MS Word 2003 (yes I know it's old :-))

  @Bernard_S

  Odd.

  Rats.

  Office Word 2003 is no longer supported.  File Windows 10 libraries system files and the links that connect dependencies (programs needed by desktop software and printer) changed - 'something' may be missing or damaged.

  Regardless of the new file system Windows 10 and how he 'sees' a Word 2003 document, the question could be attributed to the program from the printer itself - a tiny missing statement which translates not correctly size the image, position, limits.

  One or more of the following could reverberate - results, of course, depend on the cause of the problem (still unknown).  If one of the changes to trigger a file change internal - or how the document and the image are translated by the printing software - while change can help solve the problem.

  Ideas - I hope that these apply to your Word Vintage:

  • If you have not done so, check the spacing of lines on each side of the image - Dragon document mention this (if I remember) provides an example.
  • Copy the image to a new name .jpg file > open the image in Paint (paint real, not 'fresh') > set up as if you are going to print and check the size, boundaries, the parameters.  Why use Paint instead of Picasso?  The painting is Windows.  Picasso is not.  If you want, print the image (although I doubt it will be necessary).  Place (insert) of the 'new' file in your document in place of the original image.
  • Try to temporarily remove the image > save close the document > open and insert the image in place.  If the image is small enough (fits left margins / right), left click on the image and use the arrows "decrease / increase indent ' to drag the image a little to one side or the other.
  • Turn on all the markings of the document - search for oddities.  Anchors in images could provide a clue about why the image is printing 'off limits '.
  • The value of the tight margins - print any of the pages on which is located the wandering image.
  • Copy the contents of the document in a WordPad document > save content > print a page that provides one of the problem images.  Check the result.
  • If you use fonts "bizarre" and maybe even if you don't do so, be sure that embed you the fonts in the document.
  • Setting word for Printing Options:

  Control Panel > display icon > devices and printers >

  Right-click Printer > Printing Preferences > tab Layout > advanced >

  On the printer side tab > preserve the page layout (select) Yes > OK

  • If all else fails, the document to a PDF output and printing that - or print the PDF file as an image.

  I've probably missed something - if I have 'find', I'll post back.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• How to choose the dpi specific when you scan pictures on printer Envy 5530/5535

  Printer using HP Envy 5530/35 on Mac, using HP Scan software app. When you scan pictures I want as much detail as possible. The only option I have to increase the resolution is to use the 'best '. That scans only at about 200 dpi I think. How can I scan at 300 or 600 dpi?

  Mac, Mavericks, entirely software update HP. Purchase printer less than 3 months ago.

  try to go to Preferences system then printers and scanners.

  on the scan tab, click Open scanner

  with this scanning application, you can select the DPI

  If its does not try to click Preview or view details

• When you download Xbox games: they come with strategy guides or manuals of instructions?

  Don't know where to ask this question:

  When you download Xbox games: they come with strategy guides or manuals of instructions? PDF or txt file any?

  Thank you.

  Hello

  I suggest you send your query in Microsoft games forum for better support. Here are the links.
  http://support.Xbox.com/en-us/
  http://forums.Xbox.com/xbox_forums/b/xcsblog/default.aspx

  I hope this information helps you!

• When you copy documents stored in a CD Rom, I got the error 0x8007045D

  When you copy documents stored in a CD Rom, I have the error 0x8007045D message: the request could not be performed because of an i/o device error.

  Please, I beg you. What can I do to copy the documents into the CD Rom in PDF files.
  Thank you
  Stanley

  Hi Stanley,

  You can read the following article and check if it helps.

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  Hope this information is useful.

• When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

  When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

  Make sure that the correct layer is selected.

  Decrease the amount of feathers.

• How can I remove the default documents that come with a new Send on behalf of the Signature? (I9, W9, W4, etc..) These are old and obsolete, so I don't want those who will appear for selection.

  How can I remove the default documents that come with a new Send on behalf of Signature (EchoSign)? (I9, W9, W4, etc..) These are old and obsolete, so I don't want those who will appear for selection.

  With the account of the company, you will get an option to remove these forms.

  Pro account you will need to contact the support team EchoSign

  With the free account, it is not possible.

• HP Envy 4502: Will not recognize HP Envy 4502 when you try to print from Acer Chromebook

  I'm trying to get an Acer chromebook to print from my disk of google on my printer HP Envy 4502.

  I downloaded the necessary documents to HP and allowed everything that needs to be enabled on the printer.

  I am able to type the ip address of printers on the google search bar and put in place the HP software and print a test page from it successfully. The HP Envy is; However; is not listed as a choice of printers when you try to install it through the section of advanced setting of Chrome.

  In addition, I know that the printer has a unique e-mail address, but I can not print even to his email directly. It generates the e-mail, but nothing prints.

  I am able to print wireless HP Envy of my laptop.

  A definitive answer from anyone who has managed to do this would be greatly apprecaited.

  Thank you

  Hello

  It might be useful to install HP printing for chrome extension if you don't have already done.

  I've included instructions for Setup here.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Email that can be removed and freezes the computer when you try or when you scan up to this particular email when opening other emails. Other emails are very good and can open and delete them.

  I have an email on Outlook Express, which leaves me the delete (distribution of the mail... Mail delivery failed).  Whenever I try to delete or scan down to it, it causes my computer to freeze and have to go out and come back and work with my emails.  All other emails can be read and deleted.  How can I remove this email? I have Windows XP and uses a Compacq computer.  There is also a small icon of trombone to the left of this message.  Thanks for any help you can give me.

  Try to go to view | Layout and turn off the preview pane, so that the message does not open when you select.  Select the message and press and hold the SHIFT key and press the Remove button to remove it permanently.  See if it works.

  Steve

• Different looks of the bookmarks when you merge documents with Acrobat Pro DC

  Hey guys

  When you merge several PDF Acrobat DC creates bookmarks for each original file but the bookmarks different as standard bookmarks, you can create by clicking on 'Add bookmark' in the navigation bar.

  When you add other documents that already merged, the look of the modification of bookmars for the newly merged to the standard pdf looks like.

  As shown in the picture below, the first 4 documents have been merged in a single step with the merge tool and one more has been added with the "Page management" tool

  .

  Can someone explain the difference between the two types of bookmarks and how to homogenise them?

  Thanks for your help!

  Robin

  Not that I know of.

  Friday, October 23, 2015 21:03, robink27733514, [email protected]>

• When you print documents from several web pages (HP) (Yahoo Finance), pages 2 to the front are different font than page 1. How can I make them all the same as page 1?

  I tried different configurations of Assembly page and different configurations of printer without result. Basically, the formatting on page 1 is not beyond this page when printing. It happens on all websites, so is not limited to Yahoo Finance.

  I've also updated for Firefox 7.0.1 and the situation persists.

  When you use the Safari browser, the problem occurs.

  I'm glad to hear it!

• All-in-One 6310 all lights flash when you scan multiple pages

  When I scan more than 8 pages, all the lights on the 6310 flash and the State a power reset is necessary.  I also have the same result when trying to send a fax from page 14 of the fax journal.  For me it seems to be running out of memory, but I thought that he used the PC for this.  I am connected via Ethernet.  When I scan a small amount of pages, everything works fine.  When I fax directly from the 6310, all 14 pages communicate very well.  In the manual or online that seems to cover this issue, there is nohing.  Has anyone seen this and it is resolved or it's just a limitation of the product?

  This can happen if the power cable is connected to a surge protector or a power strip. try to plug it into a wall outlet directly if it is not.

• When you scan an item, the wheel of the scanner squeaks?

  Original title: Scanner couinantes

  I have a HP Deskjet 3050 j610 series and the printer prints great but when I scan something, the scanner part wheel squeks. I got this printer only 11 months.  Is the normal sqeak or is there a way to grease?

  Windows XP hardware and drivers... Scanner HP Deskjet 3050 j610 series.

  Your hardware support - regardless of your OS of choice - still and still probably will come from those who have made the material.  :-)

  Try here specifically...

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.