HP-ENVY 700-214: help with drivers, please.
Hello
I know that the installation can be done, I just need to know if the drivers are from? or will support me the installation of windows 7 Home premium. 64 bit. I can't get an answer from HP support.
Any help would be greatly appreciated and thank you.
Bonnie
Hello:
Support pages are working again and all the W7 x 64 drivers for your PC are on the link below...
Don't forget to make your set of recovery disks before installing windows 7, because once you do, the recovery partition very probably will not work any longer. See this guide for how to do this.
http://support.HP.com/us-en/document/c03481733
In order to start from a DVD and to run Windows 7 on your PC, you must first change two settings of the BIOS.
Check out this guide for which parameters to change.
http://support.HP.com/us-en/document/c03659945
Tags: HP Desktops
Similar Questions
-
Help with drivers please!
Hello
I just changed the hard drive on my HP pavilion G6. Its an old computer and I'm trying to keep it alive for my parents to use.
I reinstalled windows 7 but now miss me a few pilots. I'm having a hard time to find them. Here is some info;
Network controller - PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01\4 & 341BB839 & 0 & 00A 9
DEVICE PCI - PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA
SM BUS CONTROLLER - PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0
Any help would be greatly appreciated.
Thank you
Paul
Yes, you did not read my instructions.
I will repeat...
Go to Device Manager and click the controller smbus needing drivers. Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.
Make sure that the include subfolders is selected and the driver should install. Then restart.
You do not run all of the files in this folder.
Let Windows do the work.
-
Hi, I reformatted my computer laptop dads 2 days ago, and since then I ve had problems trying to get the necessary drivers.
The laptop tells me that I'm missing the following
PCI device
Network controller
Video controller
Video controller (VGA Compatible)
I reformatted stand-alone in the past and then put in the CD-ROM of drivers and it does the job for me. The CD ROM for the Dell doesn´t do something, so I tried manually to find the drivers on the site, but none say PCI or what I need... How will I know?
Thank you
Lauren
Install these drivers in this order:
System software:
http://ftp.Dell.com/Utility/Dell_System-Software_A03_R214472.exeChip set:
http://ftp.Dell.com/Chipset/R197840.exeThen what follows and all other drivers, you must:
Audio:
http://ftp.Dell.com/FOLDER88980M/2/R264250.exeNetwork:
http://ftp.Dell.com/Network/R203386.exeVideo and wireless drivers depend much on the optional components with that your system has been configured.
Go into the Manager of devices for the devices in question, do a right click, properties, details tab, change the drop down list of hardware ID and post the FRI and DEV ID is.
-
HP Envy 700-214 Compatiable with GeForce GTX 660
Wondered if the NVIDIA GeForce GTX 660 was compatiable with my system.
Hello
The 660 NVIDIA should work. Review the items below.
Guide to Seleting a discrete graphics card
Computer does not start after the installation of a video (Windows 8) card
-
Get a new graphics card for the HP Envy 700-214
Hello
So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.
http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications
I don't want my system to be harmed in any way. Here is the link to the computer.
http://support.HP.com/us-en/document/c04100558
Thank you!
Wolfking98, welcome to the forum.
Here is the video card manufactured by EVGA. It shouldn't harm your system somehow. However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online. They were very useful for me. Read the reviews to see what users have to say about it. As you can see, there are a lot of comments and appreciation 5 eggs. You can't do better.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
HP Envy 700-214: Message "locking of the power button.
I am getting an intermittent box appears which says "Power Button lockout".
Tour: HP Envy 700-214 with two display monitors
Monitor 1: HP 2010 (DVI)
Monitor 2: HP L1950g (VGA)
Windows 8.1
Periodically this box appears on the monitor 1. Sometimes the monitor turns off. When I turn it back on, I'll get a surveillance area of the State, which opens by saying:
DVI: assets
VGA: No Signal
1600 x 900 60 hz
Which is curious since the monitor that is upward is the DVI monitor. However, this box disappears after a few seconds.
Is the problem with my video card in the computer, or is it with the monitor?
[ETA] I stopped and restarted the computer and the monitor and held the key monitor more than 10 seconds, as suggested in other posts found here on this site. [/ETA]
Thank you very much. Please let me know if you need more information.
Hello @GaryLynnMass,
I understand that your computer displays an intermittent "power button locked" message is displayed on your monitor, and I'd be happy to help you in this case!
To avoid this message in the future, I recommend to take a look at the position of Big_Dave How can I turn off the lock on my HPw1858 monitor switch?
If the problem persists, I recommend following the steps below:
I provided you with a few steps, you can try below:
Step 1. Unplug the power cord at the back of the screen and the wall
Step 2. Press and hold the power button for at least a minute
Step 3. Plug the power cable in the monitor, and then to the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the factory reset option and select
Step 6. Try a different cable to connect your monitor to your computer
If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Thanks for posting on the HP Forums. Have a great day! -
HP ENVY 700-214: map new graphics for HP ENVY 700-214
OK, so I have a HP ENVY 700-214 (plug here: http://support.hp.com/us-en/document/c04100558 ) and I'd like to get a new graphics card that is compatible with my setup. Everything is wxactly the way I bought it. I want a graphics card that will be easy to install, but also the best in the price range of 200 to 350 dollars. Ive been looking around, but don't can't find anything that tells me what I want to know. Thank you for your time, any input would be apreciated.
@DudeSame, welcome to the forum.
This is a great little video card that will fit easily in your case and give you good performance. However, you need to check to see if power supply (PSU) in the computer unit has a connector 6 extra pins. Most maps in the price range you want to require at least a connector, 6 or 8 pins or both. At present, it is out of stock. You may be able to find an another etailer. Read the reviews to see what users have to say about it.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
Hey is the Nvidia GeForce gtx ti 750 FTW work in the Hp envy 700-214.
TGGooch123, welcome to the forum.
Yes, it should work without any problems. I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however. I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however. I suggest to buy an EVGA card. They make very good products and very good Technical Support (1-888-880-3842).
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
can anyone help with drivers for Minolta Scan3 double for the Vista operating system
If anyone can help with drivers for Minolta Dualscan 3 working with Vista? 3 Dualscan will work with Windows 7 or Linux?
Hi Mike,.
You can download and install the drivers for Minolta Dualscan 3 from this link.
http://onyxftp.mykonicaminolta.com/download/Search.aspx?HT=
Hope the helps of information.
Please post back and we do know.
-
can anyone help with drivers for invetel/coshiba 3887 rev0 vista
can anyone help with drivers vista for invetel/coshiba 3887 rev0 54g wifi
I looked everywhere goot virus and God knows what. Lucy was protected.Hello
Method 1:
I suggest you to see link and check.
Windows wireless and wired network connection problems
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
I also suggest you contact the manufacture of the product and check.
-
I'm trying to load another computer with CC, I was told that I have to disable my PC mine. I did once before and lost a lot of my images from LR, suggestions on this please.
I do the LR back ups system too.
Thank you very much
PAM
Hi goaliemom
There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.
I've done it before and I lost many of my images that were on LR. No matter WHAT HELP with this please
On the computer on which you will see that your images are not displayed?
Catalog check the most recently used file > open recent in Lightroom
Try opening a recent backup made on your newly added computer
~ Assani
-
Hello good I would like to cancel the annual plan of adobe audition,
As I have had problems with the software and the Bank, if I can help with that please.
Please contact customer support for cancellation & refund of the next purchase. Contact the customer service
Creative single-app cloud membership for Adobe Audition (one year) Subscription Office March 11, 2015 In the case of any questions, please let us know, I can certainly go for you.
Concerning
Baudier
-
Want to 700-74 Windows 7 drivers please help!
I recently downgraded my HP Envy 700-74 of windows 8, Windows 7 and I have questions find my pci simple communications controller and the video driver Please help!
PCI Simple Communications controller
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF3103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF3103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780Video driver
PCI\VEN_8086 & DEV_0412 & SUBSYS_2AF3103C & REV_06
PCI\VEN_8086 & DEV_0412 & SUBSYS_2AF3103C
PCI\VEN_8086 & DEV_0412 & CC_030000
PCI\VEN_8086 & DEV_0412 & CC_0300Hello:
Be connected to the internet, click the simple comms PCI controller, click on the driver tab, click on update driver, select Auto search and update of Windows must download and install the necessary driver IMEI.
For video, this driver should work...
-
need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you
Hello
(1) what is the complete error message you receive?
(2) when exactly you get this error message?
(3) how long have you been faced with this problem?
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
See the article below
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520 -
Need help with drivers [3552 Dell + Win 8.1]
After you install all THE drivers available for my OS, I still see this unknown device:
And this device does not work:
Furthermore the key Fn does not work so I can not change the brightness / volume, etc. using keyboard :(
Oh, and the touchpad driver could not be installed.
Where can I find missing them drivers? I tried with drivers to win 10, but they do not work I have 8.1 :(
Problem solved. I installed the third-party program which scanned my drivers and found missing.
Maybe you are looking for
-
Photosmart HP 6520 series: paper paper jam?
I got the series HP Photosmart 6520 for Christmas. While I'm still not sure how to get my Macbook pro to recognize it... my daughter was able to use it with an application on his phone. We test printed a few things and it works beautifully. So the
-
I have IE8 Favorites saved off as bookmark.htm in another network location. How can I get in firefox?
-
Can you get it someone please let me know if all precautions must be taken when using a mouse; usually is it necessary to exercise caution while connecting and removing the mouse from the USB port.From now on, the mouse is detected automatically and
-
deleting songlist dubbel
-
The apple Software Update icon appeared on my desk.
Where coming, what do need me?