HP Envy 700-214 Compatiable with GeForce GTX 660

Similar Questions

• HP-ENVY 700-214: help with drivers, please.

  Hello

  I know that the installation can be done, I just need to know if the drivers are from? or will support me the installation of windows 7 Home premium. 64 bit. I can't get an answer from HP support.

  Any help would be greatly appreciated and thank you.

  Bonnie

  Hello:

  Support pages are working again and all the W7 x 64 drivers for your PC are on the link below...

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529884

  Don't forget to make your set of recovery disks before installing windows 7, because once you do, the recovery partition very probably will not work any longer.  See this guide for how to do this.

  http://support.HP.com/us-en/document/c03481733

  In order to start from a DVD and to run Windows 7 on your PC, you must first change two settings of the BIOS.

  Check out this guide for which parameters to change.

  http://support.HP.com/us-en/document/c03659945

• HP envy 700/214: Hey is the Nvidia GeForce gtx 750 ti FTW work in the Hp envy 700-214.

  Hey is the Nvidia GeForce gtx ti 750 FTW work in the Hp envy 700-214.

  TGGooch123, welcome to the forum.

  Yes, it should work without any problems.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I suggest to buy an EVGA card.  They make very good products and very good Technical Support (1-888-880-3842).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy 700-214: Message "locking of the power button.

  I am getting an intermittent box appears which says "Power Button lockout".

  Tour: HP Envy 700-214 with two display monitors

  Monitor 1: HP 2010 (DVI)

  Monitor 2: HP L1950g (VGA)

  Windows 8.1

  Periodically this box appears on the monitor 1.  Sometimes the monitor turns off.  When I turn it back on, I'll get a surveillance area of the State, which opens by saying:

  DVI: assets

  VGA: No Signal

  1600 x 900 60 hz

  Which is curious since the monitor that is upward is the DVI monitor.  However, this box disappears after a few seconds.

  Is the problem with my video card in the computer, or is it with the monitor?

  [ETA]  I stopped and restarted the computer and the monitor and held the key monitor more than 10 seconds, as suggested in other posts found here on this site. [/ETA]

  Thank you very much.  Please let me know if you need more information.

  Hello @GaryLynnMass,

  I understand that your computer displays an intermittent "power button locked" message is displayed on your monitor, and I'd be happy to help you in this case!

  To avoid this message in the future, I recommend to take a look at the position of Big_Dave How can I turn off the lock on my HPw1858 monitor switch?

  If the problem persists, I recommend following the steps below:

  I provided you with a few steps, you can try below:
  
  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer
  
  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  Thanks for posting on the HP Forums. Have a great day!

• HP ENVY 700-214: map new graphics for HP ENVY 700-214

  OK, so I have a HP ENVY 700-214 (plug here: http://support.hp.com/us-en/document/c04100558 ) and I'd like to get a new graphics card that is compatible with my setup. Everything is wxactly the way I bought it. I want a graphics card that will be easy to install, but also the best in the price range of 200 to 350 dollars. Ive been looking around, but don't can't find anything that tells me what I want to know. Thank you for your time, any input would be apreciated.

  @DudeSame, welcome to the forum.

  This is a great little video card that will fit easily in your case and give you good performance.  However, you need to check to see if power supply (PSU) in the computer unit has a connector 6 extra pins.  Most maps in the price range you want to require at least a connector, 6 or 8 pins or both.  At present, it is out of stock.  You may be able to find an another etailer.  Read the reviews to see what users have to say about it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• EVGA GeForce GTX 660 Ti

  I have a HP e9180t desktop computer and I'm looking to upgrade to an EVGA GeForce GTX 660 Ti. This video card is compatible with my desktop computer?

  Thank you

  Hello:

  Unless someone actually installed one in this model, it is difficult to say with certainty at 100%.

  However, based on the specifications of the PC should be, because the specifications state that the PC has a P/S 460W.

  Just check to make sure that food has two connectors 6-pin PCI Express (PCIe), because it is a requirement for the card.

  Paul

• HP Pavilion p6-2102ed: MSI GeForce GTX 660 on my HP Pavilion p6-2102ed work?

  Hi all

  I have a HP Pavilion p6-2102ed with H-CUPERTINO2-H61-uA TX motherboard (Cupertino2).
  I would like to enhance it with a MSI GeForce GTX 660.
  Is the big question now: they both will work together?

  I already read something on the power supply. The video card requires a six-pin plug connected to a power supply, which is not the p6-2102ed.
  1: how to solve this? Do I have to buy an external power supply? If so, of what powersupply do you recommend? Or can I buy a cable (with six pins) and connect it to the power supply built in the p6-2102ed?

  2: I read the MSI GeForce GTX 660 measure 260 mm long. According to me, it will fit in the case. So it will not be the problem I think.

  3: the Bios will accept the new video card? Or what I need to adjust some settings in the Bios?

  Here are all the questions that I can think of right now.
  Please correct me if I wrote something wrong, and if you know the most important information, please tell me!

  Thank you for helping me.

  Hello

  The NVIDIA GTX 660 should work in your PC if it has not been flashed with a UEFI BIOS update. You will need to check with MSI on this situation.  I have an EVGA GTX 660 and I did the flash of UEFI to my graphics card.  Find out what the return policy is before you buy.

  The CX600 Corsair or CS650m would be an excellent choice for a diet.

  -------------------------------------

  BTW - The NVIDIA GTX 660 is a map of excellent graphics for HP PC that do not run a 8 BIOS version.

• Video card GeForce GTX 660 not detected by the motherboard Windows 7

  I recently upgraded my PC with an Asus z97 - a motherboard and processor Intel i5 4. After the reinstallation of Windows 7, I was able to get a signal from my video card 660 geforce gtx for a few hours. After Windows install several updates, however, I am unable to use my video card without receiving an ENTRY NOT FOUND both of my monitors. My video card is also not appearing in Manager devices, or BIOS and use rather Intel HD Graphics. Cause of the undetected video card, I am unable to install the latest drivers for my card and I have no idea what to try next. I also made sure my current diet provides enough power for the card. Is powered without a doubt the map because the fans spinning, I'm positive that I've attached all required power cables, and the card is inserted completely into the motherboard. I tried all PCI-E ports in my motherboard, but it continues to not display. I tried to install the drivers manually, but the video card should be detected before this is possible. Any help would be greatly appreciated.

  My specs:

  ASUS card mother Z97 - A

  Videocard GeForce GTX 660

  Intel i5 processor 4

  8 GB RAM

  700W ATX power supply

  I should point out that I have tried almost every technical troubleshooting that I have met, with the exception of disabling Intel HD Graphics. I fear that if, due to there not being any trace of my video card in the BIOS and Device Manager, if I disable this will also lose signal from the motherboard of DVI and HDMI, ports that are what I currently use.

  Hello

  As the graphics card is not detected by the motherboard, you will need to contact Asus for more help on this issue. You will need to check if the graphics card is detected in the BIOS or not, if not then contact the computer manufacturer is the right point of support.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Alienware M17X R4 - Nvidia Geforce GTX 660 M is dead

  I was playing a game and poof... the computer off.  I rebooted and I was 800 x 600.  The computer works fine now, but it does not recognize my Nvidia GeForce GTX 660 M.  So I think he's dead.

  I tried everything (drivers, BIOS, troubleshooting, waiting to see if she magically came back).  Nothing has worked.

  I need to buy a replacement, but online is incomplete and a computer guy said only he could do was to China and would take at least two weeks.

  Reference Dell sells this replacement?

  For the record, the system is out of warranty.

  This is a good opportunity to upgrade you GPU at a GTX680 or if your confident enough to small drivers mods then a GTX780.

  Dell will tell you the GTX780 is 'not validated for this system.

  Their significance is they have refused to release the machine and identification of GPU NVIDIA and AMD codes so when the pilot checks "compatible devices" are back with a negative.

  Easily fixed by modding the display driver to include your machine and GPU identification codes.

• Why "Reading Mercury engine" of Premiere Pro CS6 does not recognize my NVIDIA GeForce GTX-660 video card that supports CUDA and open CL support?

  I need help on Premiere Pro CS6 getting to recognize the "Mercury playback engine" using a NVIDIA GeForce GTX-660 video card supports CUDA & open CL.  My operating system is Windows 7 Pro installed on a motherboard ASUS SABERTOOTH Z87 very with an Intel i7 - 4770K CPU with 32 GB of RAM on board.

  Do a search for "cuda hack" in the forum, here is a response that could help:

  Re: CUDA GPU undetected

• In Envy 700 graphics card upgrade - 215 Intel 4600 with Geforce gtx 750 ti

  Hello

  I wonder to know - is it possible to update my system with the following specifications by adding a geforce gtx 750 ti (http://www.amazon.com/EVGA-Superclock-Dual-Link-Graphics-02G-P4-3753-KR/dp/B00IDG3IDO/ref=sr_1_2?s=e...

  Thank you!

  HP Envy 700xt desktop PC product number: F9A62AV #ABA

  I've upgraded graphics card than Geforce gtx 750 ti 2 GB and it works perfectly. The card doesn't need extra provides powe.

• HP Envy 700-470na: 600W PSU and GTX 970 for HP ENVY 700-470NA

  Hello

  I am looking to buy the GTX to my HP Envy 700-470NA 970. I also need a 600w PSU to use my current power supply (500w) would be risky.

  My question is, I'll be able to replace the power supply on my desktop with the 600w Corsair? Well, just reliable and good quality PSU with 600W which can be compatible with my PC would be great.

  Please provide a link to the PSU if possible. Thank you!

  You are welcome.  Thank you for the additional information.

  Yes, the cables should function properly.  Cards mothers HP have the ATX 24 power connector standard pins.  You could buy a modular power supply.  In this way, that you don't have to use all the cables that are not necessary.  This makes more space for good air circulation.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Video driver update for NVidia GeForce GTX 660 M on Alienware M17x R4

  I am owner of Alienware M17x R4 with GeForce 660 M graphics. The latest drivers for my system currently 307.17 on the Support of Dell Web site version. Recently I met some graphical problems during the game and the people from the Steam forums advised me to update my video drivers.

  So the question is: can I use the video drivers supplied by NVidia on their Web site? Are there disadvantages using these?

  Thank you!

  Hello!

  We recommend that you use the drivers from the Dell Support Web site, but if you want to upgrade to the latest NVIDIA driver I suggest you only do a fresh install of the driver as explained here.

  If you continue to experience problems during the game, try the troubleshooting steps in this article.

  Let me know how it goes!

• OptiPlex 7010 with Zotac GTX 660 Ti, no video output

  I have an Optiplex 7010.  I installed a PSU Corsair AX760i and have let it run for a week check that the upgrade has not created a new problem.

  Now, I am trying to install a Zotac GTX 660 Ti video card.  It seems that the new video card is recognized as the graphic edge generates a video signal is no longer, but there is also NO signal through connectors DVI 660 GTX.  I've checked the tension on 2 power connectors 6 pins for the video card and + 12v is here.  Any ideas?

  OK, I solved the problem.

  I had to modify the following parameters of the BIOS for the GTX 660 Ti Board to operate.

  General

  Advanced startup options

  X Enable Legacy Option ROM

  Secure boot

  Secure Boot Enable

  X disabled

  After making these two changes, the video card GTX 669 it works now.

  The video Commission works today, a new BIOS option appeared in which I allowed, as follows:

  Video

  Multi-display

  Enable multi-display x

  At this point, I have now loaded the drivers for the new graphics card and everything seems to not work as desired.

  I also noticed from another forum that he had questions about the "SERR Messages" BIOS option, it is ACTIVATED in my machine.