HP envy 750: attempt to add to new PC SATA drive

Similar Questions

• Attempt to add a "new target or device', but the sbRIO 9607 is not listed

  Hello

  Just upgraded to 2015 LabVIEW and CompactRIO 15.0.

  Also used the Service to update OR install the patches for 2015 of LabVIEW and CompactRIO device drivers.

  I'm trying to add a target in LabVIEW in the window "add targets and devices." I select 'new target or device' and develop the sbRIO options. I see a lot of targets, but unfortunately the sbRIO-9607 does not appear. It simply isn't.

  

  Thoughts? When I'm back in the office on Monday, I'll try a repair of the driver.

  Best,

  Dan

  Well, this is embarrassing, but I don't know I'm not the first and won't be the last to commit this error.

  I had accidentally opened LabVIEW 2014 SP1 instead of 2015 of LabVIEW.

  Of course, it works in 2015 from LabVIEW. Congratulations if you guessed this might be the problem.

• Attempt to add a new data with a script store

  I have an interview put in place where I remove a store of data once a week and he re-clone of our SAN.  I'm stuck with the script to add to the store of data back.

  I try to get the LUN ID of the new store of data to add.

  What I have so far is:

  I have remove the vSphere data store and delete the SAN volume.

  Then for a list of the currently available SCSI LUN:

  Get-VMHostStorage - RescanAllHba

  Get-ScsiLun | Select CanonicalName | Out-file c:\scripts\Before.txt-largeur 120

  $Before = get-Content c:\scripts\Before.txt

  I have it dumped to a file to make sure, that it was not truncated at all.

  Then, I create the new volume on the SAN and get the new list LUNS:

  Get-VMHostStorage - RescanAllHba

  Get-ScsiLun | Select CanonicalName | Out-file c:\scripts\After.txt-largeur 120

  $After = get-Content c:\scripts\After.txt

  Then to set the variable to the new LUN ID:

  $LunID = compare-object $Before $After

  The problem I have is that the $LunID variable is set to

  @{InputObject = eui.0134d870bf1f182f6c9ce90064ee16c5; {SideIndicator == >}

  Instead of the value eui.0134d870bf1f182f6c9ce90064ee16c5 that I need.

  Is there a way when I set the variable or run the object - compare to select only the part of this line?

  The result should be in $LunID.InputObject.

• Attempting to add the new swatch library, I get "" cannot open, select HAVE 8 or superior or EPS ' "

  I try to add the "Roland color systems Library.ai' in ID CS6.  I added the same file without problem to AI CS3, but when I try to add to ID, I get:

  "Cannot open the file, please select an Adobe Illustrator 8 or above document or file EPS or an Indesign Document from Adobe"

  I also tried to convert it to an EPS in artificial intelligence, then re-import in ID, but I get the same error, also tried to save in legacy versions.  I see in the swatch library folder in the ID, she seems to have a lot of files ACB which are files default swatchbook.  Is there maybe a way to convert this ACB file and drop it right in this folder, or any other suggestions?

  Select all the nuances in the Illustrator Swatch Panel; then click on the button in the swatches Panel menu and save the as ASE Swatch Library.

• ENVY 750-129cb: new computer - DVD not opening

  Hello

  Just bought a HP Envy 750-129cb awesome computer - and internal DVD/CD RW drive does not, when the button is pressed (after the opening of the case of money - outside)

  HP DVD/CD RW drive

  Module # DV - 8465H, February 2016

  Provided with the computer

  I opened the computer and checked all cables, etc., everything looks good, but the DVD will not open.

  Any ideas?

  Thank you very much.

  Hello

  Thank you very much for the help - I really appreciate it.

  So, I bought a new graphics card - graphics of 750 Genforce GTX ti, as my old HP Elite had an AMD Radeon 6700, while I was trying to get an equivalent to him for my new HP Envy, since AMD card was not compatible with the motherboard.

  The 'tech' guy, said it would make a difference of 25% - the graphics card GTX AGAIN, that what came with the HP Envy 730 GT map - and especially good for photos.

  But, please let me know your thoughts. Don't you think it's a value-wile put this card in? Maybe I'd better return the card and put it toward a new laptop, since both of my laptops died at.

  Thank you once again, all the details would be really nice

• HP Envy 750-197c Desktop: you can add a SSD internal flash disk to the envy of HP 750-197c Desktop

  You can add an internal SSD to the envy of HP 750 - 197c Desktop that has a 2 TB drive installed?

  DMSIceman, welcome to the forum.

  Yes, you can move the HARD disk and install an SSD.  You will need to buy at least a 128 GB SSD.  Here is the data sheet for the computer.

  The best way to install an SSD is to leave the current HARD drive as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the software of Migration data provided by the SSD manufacturer on the HARD drive.  Once installed, open it and follow the instructions carefully.  You choose the SSD as a target.  After the data is transferred from the HDD to the SSD, you can disconnect the HARD drive and start the computer.  It should start on the SSD.  Then, you can disconnect the SSD to the first SATA connector and move to another Bay HARD drive and connect it to another SATA port on the motherboard.  You can use it for storage.

  I like the SSD Samsung EVO.  Samsung offers its data Migration software to clone HARD drive.  In addition, they provide their software Wizard to optimize the performance of the SSD.  You can find all the software at the bottom of the page in the link I provided for the EVO.  The Samsung SSD were good about starting in HP computers without changing the BIOS settings.  You will need to buy an adapter to allow the reader to 2.5 "to fit into a 3.5 Bay".

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 750 - 177C envy: addition of Samsung SSD for envy 750-177C

  I just bought a HP Envy 750-177c. I have it operational and it works very well. I had installed a Samsung 850 EVO SSD in my old computer and now want to add to it. I have an external cloning device that I can plug it into the computer and launch the software from Samsung to clone the HD HP. Once this is done, I will be able to add the SSD to the drive Bay and make the boot drive. I did all these steps with my old computer, so I think that it will be substantially the same with the RESUME. I wonder if there is any change in the BIOS, that I should do to get the best performance from the drive. I also heard AHCI. Is selectable via the BIOS with Windows 10, or do I have to make some changes by Reg Edit? I need to download a driver AHCI? Is this useful?

  Thanks for the tips.

  Robb

  Hi @RobbL!

  When it comes to SSD, I suggest you to activate the AHCI because it often improves performance when it comes to SSDS (and not only - if you are running an SSD and a HARD disk HARD drive will get some push), and it offers a few additional features like connection hot records.

  You can activate it by following these steps:

  * Let the connected existing boot drive.
  * Go to MSCONFIG and set the PC to boot in safe mode.
  * Power cycle your PC all the way to the top in safe mode then power down in safe mode.
  * Turn on and boot into the BIOS and enable the AHCI and disable secure boot. Save the changes.
  * Restart your PC. If OK at this stage then return to MSCONFIG and uncheck start safe mode and save the changes.
  * Turn on your PC and if OK then power off.
  * Connect the new SSD and power upward.
  * Use the cloning software to clone the old disk on the new SSD.
  * Switch off the PC. Disconnect the old drive and plug the new SSD in this SATA port.
  * Lights up and you should be good to go.

  Regarding the drivers, you can take a look at this article from HP on the SSD:

  http://support.HP.com/us-en/document/c02435719

  Hope this helps, and feel free to ask any questions you may have.

  See you soon!

• HP Envy 750-124: cannot get into the Bios of the normal on the envy of 750-124

  I speak not normal Bios and UEFI. I've recently updated to Win 10 anniversary

  Given my http://support.hp.com/my-en/drivers/selfservice/hp-envy-750-100-desktop-pc-series/8499646/model/8819... Bios Update

  who was A0.16 Rev.A.

  Installed and it reset my settings. I need to come back here to turn back on my virtual technology. Otherwise, I can create only 32-bit VM VirtualBox

  https://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/how-to-access-BIOS-to-enable-th...

  Cannot return to normal Bios. I tried Tap the ESC which worked before, screen freezes and I hit enter and the HP logo comes up, tried to hit and also hit F10. As much as I turn power. I have a wireless Logitech K800 keyboard that worked before. I tried a usb keyboard standard ensuring they were on a USB 2.0 port. F2 to display a cold start UEFI bios.

  Them win 10 things don't me settings there, recovery, advanced. Tried all

  I was hoping that HP had fixed the enter the Bios thing with updated Bios if installed. This thing was a pain like that otherwise I'd be a camper happy with this PC, how is it you can not solve this HP?

  Because of disconnect hard drive it hangs just below ground

  The solution is

  I had installed a better Nvidia GTX-950 video card. By hitting the ESC, it hangs and nothing happens. Black screen, although you can see slightly change the colors

  Fortunately both the edge video card and the new Nvidia both using a HDMI cable. So I just plug my integrated video card. Started while typing ESC and the Legacy Bios screen selection came where I choose F10 to enter the Bios of the legacy

  When you perform an update of the HP Bios seems to put everything back by default, in other words on board, by selecting the video edge. Although you can see by selecting HDMI port at startup if you think it's ok.

  I have worked with Dell PC for 15 years to work, it does not matter what card I put in them. At the start, I hit F2 and Bios loads so that bit me. Now I know

  Hope this helps someone else.

• HP ENVY 750-055XT: HP download win 10 for win 7

  I bought a refurb unit. He came "upgraded to win 10 64.  But there is no win 7 files to restore.  I have a new win 7 64 pro license. On the CD.   How can I install and lose 10 WIN.  I want to have anything to with win 10 in the computer.

  I have the same computer with win 7 pro 64 installed. I have raid 1 disks.  If I removed the drive in the new computer and installed one of my raid drives which would solve the problem?

  I'll have one connected to the internet and the other will have my critical files and will not have internet capability.

  @HEMI7309

  http://support.HP.com/us-en/mediaorder/HP-envy-750-desktop-PC-series/7779687/model/7805186/softwareitem/M2H64AV/STEP1

  REO

• HP Envy 750-120: bi-ecrans on want 750-120... HOW... Help, please...

  Just bought the HP ENVY 750-120 office... also bought 2 new monitors (HP Pavilion 27xw 27 - in LED Backlit Monitor IPS)... cannot get the computer to recognize 1 monitors...

  Curiously, the Office has 1 hdmi and 1 connection on the video card dvi... but both monitors only came with vga connectors (Thanks much HP)... I bought 2 new hdmi cables for monitors but that you can only use 1 of them in the region of the video card... There are 2 connectors extra hdmi on the back of the computer but still using those in all combinations with reboot and detection under settings display does not cause the computer to detect the 2nd monitor...

  I think my only other option is to hang the 2nd monitor to the dvi on the video card slot, but I'll have to find a converter because the monitor is only hdmi and vga... does what his right?

  I'm not computer expert, please excuse my questions of common sense... why the video card is not 2 hdmi connectors and why HP is hdmi and vga monitors but then make their computers with only 1 connection hdmi and dvi... also, why doesn't the computer recognize the 2nd monitor so I use one of the HDMI slots at the bottom of the computer... What are these slots hdmi because then...?  really annoying that HP does not sytems super easy to hook up to the secular...

  Thank you for your suggestions...

  -bear

  I solved the problem of dual monitor.  The computer came with only 1 hdmi connector and 1 connector on the video card.  Monitors have vga connectors and hdmi... a monitor worked with hdmi to hdmi slot, and I ran to the local big-box store and bought a hdmi to DVI and hooked up to the video card... immediately my 2nd monitor came.

  Problem solved,

• Problem with 'Add a new value' component functionality

  Hi all

  I'm having a problem with the component feature 'add a new value '.  The component is designed to add an instructor for the purposes of accreditation.  When a new teacher is added using the component, it is added to a table for certification.  The search folder search this table allowing the user to update an existing record of instructor. Add the search folder for the component is a view of PS_PERSONAL_VW, which excludes the entries in the table of accreditation.  The only key to scroll 0 is emplid accreditation file. When an attempt is made to add a new employee, I get the error - "the value that you have tried to add already exists. Please specify a new value in the above fields. ", despite the fact that the selected employee was not added and is not in the table of accreditation.

  Someone has an idea of what the problem is here?

  PTools Version: 8.53.08

  PS App Version: 9.0

  Oracle DB Version: 11.2.0.3

  Version of the operating system: Win7 64 bit

  Thanks in advance.

  Too bad! I thought about it. It was a problem with the quick table of the emplid field.

• Record of. PDF with repeatable subforms adds a new Instance.

  Hey everybody,

  I have worked with dynamic forms LiveCycle Desinger for a few years now, and this is the first time I see this kind of behavior.

  I have a very big form in LiveCycle Designer. There or 50 subform repeatable sections. I save the designer, and then open it in Adobe Acrobat X Pro. Acrobat Pro, whenever I have re-record it then re-open, a new instance is added to each subform repeatable.

  If I fill it, save it, and then reopen it, he has all my info, as well as a subfrom empty additional below each section.

  I have no formcalc in the presave, nor do I have any global fields in my form... In addition, each single repeatable subform named. I am at a loss.

  I have a sample of this pdf here. If you have a different file hosting site you prefer, do let me know.

  I'd appreciate any help anyone could offer. I don't know what is the cause.

  -Scott

  Hello again everyone,

  I found the answer to my problem. I had a devil of a time from Googling the problem, so I'll put some sentences that I tried below, where like-minded individuals has a similar problem.

  The main problem was with data binding. I had left the data binding for all as the default 'using the name (...) '. I was under the impression that as long as the sibling elements have been appointed to the same thing, there is a conflict. I was wrong.

  In my form, I used static subforms to organize the fields available in a dynamic repeatable subform. The static subform called "sf_positioning". It happens that this field has an uncle named the same thing. It was close enough to provoke a conflict, making the repeatable subform record an additional instance whenever the data has been saved. This can be corrected in one of two directions... ((1) set one of the subforms wrongful use "no data binding" (use this only if the content of the subform is not be exported or merged) or 2) give the subforms of unique names.

  I need to look if everything must be particularly well appointed... As I said, it makes more sense to me that the only restriction should have been on the sibling elements, but I will in the future to make sure there are at least three degrees of separation between just like named controls/subforms.

  Hope that helps someone else...

  And what follows is some of my attempts at Googling the problem. I hope that this will facilitate the solution to find for others:

  -Player which extends shape Dynamics breeze repeating subforms.

  -Economy adds a new instance of the repeatable subform.

  -Whenever I save, I get more empty instances of a subform repeatable.

  -Repeatable subforms not working does not go as planned.

• Add a new text message Contact in 10 IOS?

  I have the latest IOS update on my iPhone 6 s.  A text message came through with the phone number because I didn't have that person in my Contact list.  When I typed the 'Détails' icon, he was no longer the option 'add a new Contact '.  How do you do that now?

  Hi, pgalli!

  Thank you for using communities Support from Apple. After reading your post, I understand you want to create a new contact with an incoming text messages, but have been unable to find a way to do it in iOS 10. I know it's important to keep your contacts up to date, so I'd be happy to help you!

  Instead click on the 'i' in the upper right of the message (where the details used to be in iOS 9), type right on the actual phone number itself at the top in the center of the message. You will be taken to another screen that contains a message option or call the number, but also options apart from Contact, create a new Contact and add to Contact existing.

  See you soon!

• Install macOS that Sierra is trying to add a new support tool

  When you try to install macOS Sierra I get a popup asking for my password that says "install macOS that Sierra is trying to add a new support tool". I have never had this with the previous updates and research of these discussions and more generally on Google pulls a vacuum. Is it safe to put my admin password in and proceed with the installation?

  I can tell that you have no option to move forward.

  Is it safe? We can only assume, if you trust the big Apple.

• How to add a new recipient when you reply to a message?

  I received an email from a person. When you reply to the sender, I need to add a new recipient of my answer, but I can't do that.
  How should I do? Thanks in advance for your support!

  but I can't do that.

  What exactly prevents you to add another recipient?