HP envy laptop 17 k20lna: need advice please wifi connections
Can Hi anyone help me please
my laptop sees only 2 GB wifi to connect too but I'm sure it should be to see 5g
I was updated for windows 10 years ago, but even when I bought it he saw that 2 g
all my other PCs phones tv etc see all 2g and 5g can someone help me please
Thank you very much
PEP
Hello:
Most of the laptops HP consumer do not come with dual-band wireless network adapters.
The best way to check if your laptop has a double-band Wireless-N card or single band was the following:
Go to Device Manager and click to expand the category of device of the network adapters.
You will see the names and model numbers of wireless and ethernet cards.
If the suffix of the model of your laptop wireless network card ends in b/g/n, it is only a map of the only band (2.4 Ghz).
If it ends in a/b/g/n or a/g/n, then it is a wireless card dual-band (2.4/5.0 HGz).
Tags: Notebooks
Similar Questions
-
Inspiron s 660: hard disk failure. Need advice please.
Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate). She said that was no longer working and I could. I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:
1. when it has received, it came not with a physical disk from the Windows 8.0 operating system. It was pre-installed and then upgraded through its work of departmental to 8.1 it.
2. I can't access the code of Windows because it is in the BIOS.
3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best. As you have probably concluded he was not recognized.
4. I thought wiping one of my hard drives and do a clean install of Windows 10.
Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?
Question: What do you suggest I should try? It's a nice little system and everything is clean and stable. I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.
Thank you.
ROUTE29
Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.
Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.
http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102
The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.
Bev.
-
Strange (for me) email hack, need advice please
Sorry if this isn't the right place to post this question but I need help please!
A friend forwarded an email to me from his iPad, request information on the content of the e-mail. The title of the e-mail with the phrase "Bill and W - 9. I said to my friend with this question: "what is the amount was discussed. A few minutes later, I got a response: "$6 500 and he should be sent to their bank account, I will send you the info from the Bank before leaving town tonight." Please confirm if the info of the Bank should be sent. I checked to see that the email from sound, it was, so my first thought was that it responded to our e-mail, thinking it was another. I responded saying "hey I think you sent me this by mistake. Shortly after, I got a response that was obviously false. When finally, I talked with him, my friend was nothing achieved responses by e-mail I sent. Then, someone broke in and took his identity by email in an obvious scam. I've not heard of this and have no idea how it was done.
My Macbook Air is only used at home and by me only. Should I be concerned about the safety of my data or e-mail?
How can I tell my friend to check its security online?
Thanks in advance,
Jim
It is possible that your friend has had some malware installed and it would be prudent to check, but there are other explanations that do not involve them.
Email from: and Reply-to: addresses are easy to fake:
https://en.Wikipedia.org/wiki/Email_spoofing
and unless you know what you're looking for, it is not easy to spot counterfeits.
The emails themselves are not harmful, it is that they deceive the recipient actually that's the problem.
C.
-
Hey all,.
as I have found no e-mail address to communicate directly with Blackberry on this problem (I hate to use Twitter, their support is atrocious (using answers pre-formulated to 'help you')), I hope I can find help from you guys.
When you use the 'Instax Share' app to print photos from my private, it does not work.
First, you will need to connect to the printer via WiFi (this step works), but I can't change the printer settings in the app. Can I not send my photos to the printer.
When I try, I get the error message "no printer not found", even though I am obviously linked to the unit.
When you check the extended permission settings, the field that would allow the application control WiFi connections is gray. The only parameters that can be modified are access to contacts, memory, taking photos and video and GPS.
Anyone got a good idea on how to solve this problem?
My guess: Priv Android is coded too sure. Furthermore, I use Android 6.0.1.
P.S.: the application works on any non-Blackberry-Android phone (rooted and without root).
OK, so to clarify, this isn't a device of BES. In addition, you can control completely independent WiFi connections on the device. But the application cannot control the WiFi connections, that he must perform in order to function. Fix?
If it is accurate, then it continues to point to the application itself, not the device or the device OS... When you installed the application, he should have asked approve you a variety of security access so that it will run... If you do not approve those, you have limited it. If she has not asked for approval, then the application developer needs to fix this.
-
Laptop crashes! Need help please
This week my 4 year old laptop hp pavalion dv6 laptop started crashing. Then I started trying to find the problem and fix it.
First, I checked my drive c on the mistakes and done a Defrag. My computer has no problems with these tasks.
Secondly, I checked my computer on virus. I used malwarebytes and avast to scan my pc. Here, too, there where no problems found.
Finally, I formatted my pc and reinstalled windows 7 again. It was a little difficult because it kept crashing, but after some time I managed to pull it off. Now, my pc works fine but on the strangest moments, it crashes. For example when I do nothing and wait for 2 minutes, it crashes. But if I continue to work on it without running all heavy and just programs using the internet it does not crash for at least an hour or more.
When my pc it blocks just gives a black screen and numlock/shiftlock lights are flashing. Also downstairs there is an orange light flashing hard drive logo.
After a reboot hard, I can use my pc again and it's as if nothing happened.
I am engineering student in the last year and I need my pc to school daily.
Please can someone help me to try to solve this problem?
If these are your time I'm scared, I agree; It's look like a motherboard problem; for example the GPU.
-
HP ENVY laptop - 15-k201ne: need recommendation! M.2 SSD
Hello
I need help in the choice that can right ssd 256Go m2 laptop
as the maintenance and Service Guide shows that it can withstand 2280 (256 GB SATA (MLC) m2 / 256 GB SATA (TLC) m2)
After much research, I am very confused because a lot of people here could not be mobile today recognize the new SSD m2
I understand that the SSD is 2280, interface Sata III (not PCIe) and maximum 256 GB, but (TLC, MLC)? Some manufacturers did not even mention the type of flash!
Pleas so Can someone recommend me a compatibel M.2 SSD or confirm if one of the following choices works well
Samsung 850 EVO M.2 MZ-N5E250BW 250 GB
SanDisk X 400 m2 256 GB SD8SN8U - 256 G
Transcend MTS800 256GB TS256GMTS800 m2
Kingston G2 m2 240GB SM2280S3G2 / 240G
ADATA SP900 M.2 256 GB ASP900NS38 - 256GM - C
I appreciate any help, thanks.
I hesitate to suggest this update because a long thread which is basically come to the conclusion that the port of m2 on some models of HP who came without a reader m2 has been disabled.
The thing that seems to get lost in all this is that if you are forced to use a SATA-III m2, and at best is all your laptop is running, then you are just as well use a 2.5 inch SSD SATA-III. Reading and writing speeds will be so close it wil not made no difference. The only useful to have m2 corresponds to type IS PCI - e, as speed on those is in another Stadium. But we know you cannot use one of these. So save yourself some grief and just get a 1 TB 2.5 inches SSD SATA-III. If you must go forward, so if something will work the first one that you listed below, the Samsung 850 Evo would be my choice. And if you can use a m2 you are not capped at 256 concert is told by the way: it's just the biggest offer of HP. If it will work, size (capacity) will not be the factor limiting. They are readers of 2280, that's right.
-
Hello
This is the structure of the table as I / p for my request.
I / P
with temp1 as
(select 1 trans_id, currency "USD", amount of 1500, 'B', 'www' counterpart of the double orientation_buysell)
Union
Select 2, 'USD', 500, the of ', 'www' from dual
Union
Select 3, 'USD', 1000, the of ', 'www' from dual
Union
Select option 4, "SGD", 2500, 'B', 'xyz' from dual
Union
Select 5, "SGD", 500, the of ', 'xyz' from dual
Union
Select 6, "SGD", 1000, the of ', 'xyz' from dual
Union
Select 7, "SGD", 1000, the of ', 'xyz' from dual
Union
Select 8, "JPY", 3000, 'B', 'yyy' from dual
Union
Select 9, "JPY", 2000, the of ', 'yyy' from dual
Union
Select 10, "JPY", 500, the of ', 'yyy' from dual
Union
Select 11, "JPY", 500, the of ', 'yyy' from dual
)
Select * from temp1;
O/P should be like smthing below.
Alert_id start_trans_id return of orientation_buysell of end_trans_id currency
1 1 2 USD B www
1 1 3 USD B www
2 4 5 SGD B xyz
2 4 6 SGD B xyz
2 4 7 SGD B xyz
3 8 9 JPY B yyy
3 8 10 JPY B yyy
3 8 11 JPY B yyy
So I used under query, I got all my requirement except Alert_id, could you please help me how to generate this alert ID.
Query
Select a.trans_id Start_trans_id, b.trans_id End_trans_id, a.currency, a.orientation_buysell, a.counterparty
of temp1 one
inner join
b Temp1
On a.counterparty = b.counterparty
where a.orientation_buysell = 'B '.
and b.orientation_buysell = s"
order of a.trans_id, b.trans_id;
Actually these all the data I need to choose from a table (here temp1), its data according to my requirement(o/p) and also need to add a new column "Alert_id" which must be fulfilled that I showed in the o/p and finally insert in a particular ALERT Table.
I don't get this alert id concept in my query, how to make this a generic.
Any help would be really appreciated. Thank you
Hello
Thus,.
all lines with the lowest value of trans_id need alert_id = 1.
all lines with the value the lower 2nd trans_id need alert_id = 2,
all lines with the value the lower 3rd trans_id need alert_id = 3,
...
all lines with the nth lowest value of trans_id need alert_id = N.
This sounds like a job for the analytical DENSE_RANK function:
Select
DENSE_RANK () OVER (ORDER BY a.trans_id) AS alert_id,-* NEW *.
a.trans_id Start_trans_id, b.trans_id End_trans_id, a.currency, a.orientation_buysell, a.counterparty
of temp1 one
inner join
b Temp1
On a.counterparty = b.counterparty
where a.orientation_buysell = 'B '.
and b.orientation_buysell = s"
order of a.trans_id, b.trans_id;
I added 1 line of code at the beginning; Otherwise, it's exactly what you've posted.
-
Need complex need advice please
Hi I have a table as below:
I have start and end dates. There's a reocrd for each hour of the day. In the above example, the START DATE is a Monday and so the first 24 recordings belong to Monday and the next 24 belong to Tuesday... and 24 last belong to the following MONDAY. I need help in creating a column where I can assign each record a day, for example in the case of the table above the Chronogram of 25-48 should be TUESDAY and 49-72 as Wednesday... Can any help me me or advice on that?SITE_ID_NBR DIRECTION START_DATE START_DAY END_DATE END_DAY TRAFFIC_SAMPLE_ID BIN_DATA_ID END_INTV_TIME BIN_1_DATA RN CNT WEEKEND_FLAG 97809011 1 110308 Monday 111008 Monday 143302 114638 1400 4 1 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114639 1500 4 2 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114640 1600 2 3 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114641 1700 1 4 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114642 1800 6 5 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114643 1900 2 6 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114644 2000 1 7 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114645 2100 1 8 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114646 2200 1 9 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114647 2300 0 10 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114648 2400 0 11 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114649 100 0 12 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114650 200 0 13 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114651 300 0 14 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114652 400 0 15 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114653 500 0 16 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114654 600 0 17 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114655 700 0 18 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114656 800 1 19 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114657 900 4 20 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114658 1000 0 21 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114659 1100 3 22 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114660 1200 6 23 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114661 1300 5 24 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114662 1400 3 25 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114663 1500 5 26 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114664 1600 3 27 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114665 1700 1 28 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114666 1800 4 29 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114667 1900 1 30 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114668 2000 2 31 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114669 2100 1 32 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114670 2200 0 33 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114671 2300 1 34 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114672 2400 2 35 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114673 100 1 36 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114674 200 2 37 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114675 300 0 38 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114676 400 0 39 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114677 500 0 40 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114678 600 0 41 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114679 700 0 42 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114680 800 1 43 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114681 900 4 44 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114682 1000 0 45 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114683 1100 0 46 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114684 1200 4 47 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114685 1300 5 48 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114686 1400 4 49 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114687 1500 8 50 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114688 1600 3 51 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114689 1700 4 52 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114690 1800 4 53 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114691 1900 0 54 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114692 2000 0 55 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114693 2100 1 56 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114694 2200 1 57 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114695 2300 0 58 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114696 2400 0 59 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114697 100 3 60 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114698 200 0 61 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114699 300 1 62 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114700 400 1 63 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114701 500 1 64 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114702 600 0 65 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114703 700 0 66 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114704 800 2 67 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114705 900 2 68 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114706 1000 0 69 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114707 1100 0 70 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114708 1200 0 71 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114709 1300 1 72 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114710 1400 0 73 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114711 1500 0 74 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114712 1600 0 75 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114713 1700 1 76 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114714 1800 1 77 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114715 1900 3 78 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114716 2000 2 79 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114717 2100 0 80 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114718 2200 0 81 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114719 2300 1 82 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114720 2400 2 83 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114721 100 5 84 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114722 200 5 85 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114723 300 3 86 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114724 400 0 87 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114725 500 1 88 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114726 600 1 89 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114727 700 0 90 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114728 800 2 91 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114729 900 0 92 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114730 1000 0 93 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114731 1100 3 94 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114732 1200 1 95 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114733 1300 1 96 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114734 1400 0 97 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114735 1500 0 98 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114736 1600 2 99 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114737 1700 0 100 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114738 1800 2 101 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114739 1900 1 102 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114740 2000 3 103 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114741 2100 0 104 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114742 2200 1 105 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114743 2300 0 106 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114744 2400 0 107 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114745 100 0 108 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114746 200 2 109 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114747 300 0 110 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114748 400 0 111 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114749 500 1 112 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114750 600 2 113 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114751 700 0 114 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114752 800 0 115 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114753 900 0 116 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114754 1000 0 117 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114755 1100 0 118 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114756 1200 1 119 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114757 1300 1 120 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114758 1400 0 121 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114759 1500 0 122 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114760 1600 1 123 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114761 1700 1 124 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114762 1800 0 125 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114763 1900 0 126 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114764 2000 0 127 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114765 2100 0 128 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114766 2200 0 129 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114767 2300 0 130 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114768 2400 0 131 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114769 100 0 132 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114770 200 0 133 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114771 300 1 134 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114772 400 1 135 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114773 500 0 136 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114774 600 0 137 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114775 700 0 138 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114776 800 0 139 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114777 900 0 140 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114778 1000 0 141 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114779 1100 2 142 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114780 1200 0 143 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114781 1300 0 144 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114782 1400 1 145 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114783 1500 1 146 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114784 1600 1 147 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114785 1700 0 148 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114786 1800 0 149 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114787 1900 1 150 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114788 2000 2 151 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114789 2100 1 152 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114790 2200 0 153 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114791 2300 0 154 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114792 2400 0 155 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114793 100 0 156 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114794 200 0 157 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114795 300 0 158 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114796 400 0 159 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114797 500 0 160 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114798 600 0 161 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114799 700 0 162 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114800 800 1 163 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114801 900 1 164 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114802 1000 2 165 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114803 1100 2 166 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114804 1200 2 167 169 Y 97809011 1 110308 Monday 111008 Monday 143302 114805 1300 3 168 169 Y
Thank youHow you order these documents? The TRAFFIC_SAMPLE_ID can be used for this? In this case, you could use something similar to this
untested due to lack of instructions insert/create
select v.*, to_char(to_date(start_date,'mmddrr') + trunc(rn/24), 'Day') from (select t.*, row_number() over (partition by SITE_ID_NBR, DIRECTION, START_DATE order by TRAFFIC_SAMPLE_ID) rn TRAFFIC_SAMPLE_ID) rn from myTable t ) v
The details of the explanation of the solution were in correspondence with the details of the level of the explanation of the issue.
-
I am learning asc3 and love it. I just stumbled across a problem I tried to do a tutorial recently where loading the design of random on them cards and cards back.
I constantly get this error. If someone can you please check my work and the opinion and tell me where I made the mistake. I don't think its in the code, but the placement of the graphics, but I need a confirmation about this and also on where is the error:
TypeError: Error #1009: cannot access a property or method of a null object reference.
card / settype)
in Memory / CardLoader)
to Memory()
Please GO HERE to GET ATTACHMENT OF MY FILES THAT I MADE: http://www.actionscript.org/forums/showthread.php3?t=190078
Thank youIn my view, that he had no problem compiling. The error that show you is a runtime error. I'm assuming that your fla file will start the show as soon as it did the compilation, and it's where he hit the problem... trying to act on an object that was not in the scope. To speak with the object, it must be present, but it was 5 executives down the road.
If you want to act on it when it finally got here, you have assigned something from the outset within the Framework 1 (some variable (s)), and have little code in the frame to the bottom of the line where Load_mc is who uses variables.
What you could do as an alternative, is have the card or invisible Framework 1 Load_mc and then make it visible when you get to the image you want to show him in.
-
computer freeze-up. I'm stuck. need advice please.
Greetings. I am back moaning on my computer. I'm on Athlon XP2000 + with Windows XPpro SP3. It keeps freezing upwards of anytime, anywhere, everything I do, browse the Internet or opening a folder on the desktop and even on startup and shutdown. Spend more time watching starts. He defragged yesterday and allowed the event viewer. All devices and all work properly checked and their drivers are up-to-date. I have Avast running and she have also digitized without result. None of this has made all the difference. It freezes again. But nothing shows in the event viewer. Charge only information about services being started up. Repeated several times because of me the reset. So it is perhaps not a thing of Windows. He told me that my motherboard does not work correctly. And now, I'm stumped. I don't know enough about the symptoms of the disease of computer to even guess what the problem is. Help.
Could be something material fail to virus, overclock too many programs running at the same time. Difficult to say without seeing the machine in action. Try these programs and they can help. The first is a bug detector. The second is a good uninstaller, but has a single utility. When you download it and run it, click on tools then autorun manager. This will show you what's running at startup. You can select one you don't no need to startup and remove. It does not kill the program, just does not come on at startup. The third is a good Cleanup utility, solves the problems of performance and register. I run every day at startup and keep on top of defragmentation without delay of time as well. I hope this helps.
http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.html
http://download.CNET.com/advanced-SystemCare-free/3000-2086_4-10407614.html
PS. They are free.
-
Need advice please as soon as possible
Hello
Big problem:
My Dell OPTIPLEX 780 died today (sudden) I did NOT save the files recent\ly and need them.
Need a new PC and an external anchor ASAP system
My mother reached 100 years Thursday 20 OCT. And it's all on HD to the DEAD system that works as a secondary.
I need the files and something reliable. I currently use a dell vostra LT, (which has been a big disappointment) and an E520 XPS (windows XP SP 3)
I am in Toronto and because the physics of severe bone disease'm housebound.
Because time is the problem can anyone suggest a DELL PC and external sytstem berth which comes FAST and reliable?
Thank you!
Hi _XtanyaX_,
You must contact Dell Canada to place an order. It would take some time for the order to be delivered to you. Your best bet would be to look online and choose one that is configured and the fast ships. The other option would be to go to a store like of like Best buy, Wal-Mart, etc and buy one on site.
You will need to take your pc to a local computer store and see if they can clone the hard disk to retrieve the information.
-
Windows 7 Pro - cannot install PhotoMagic - need advice please!
Just got a new computer with Windows 7 Professional. Have a CD of Micrografx of probably 1988 and only use PhotoMagic 6. When I went to install refused and when I went to the compatibility mode, it does not go to the CD Player for a program. Can someone give me advice?
You can copy the CD software configuration in your Documents folder?
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box. This will open your Temp folder, there, you can remove all Windows will allow you to do.
It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.
Make older programs in this version of Windows (Windows 7)
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsHelp with Windows 7 compatibility issues
http://Windows.Microsoft.com/en-us/Windows7/help/compatibilityWindows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxThis could become you go if all else fails, and it's all free.
Windows Virtual PC
Download Windows XP Mode
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspxWindows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."
-
Hello, I have an existing the vcenter server install managing two esx 3.5 hosts. The vcenter is version 2.5.0.x. I want to manage my new hosts of vsphere 4.1 esxi through the vcenter. I would check that if I improve my vcenter 2.5.0 for the last version vcenter Server required for the 4.1 that I will be able to manage my old esx 3.5 hosts? Will be an upgrade inplace vcenter 2.5.0.x support now the license server in place or I will have to manually install this after? Thanks for any info. Doug Dorbuck
You can mange ESX 3.x host with vCenter 4.x - you can't manage ESX 4.x, vCenter 2.x hosts
I think that in a place of upgrade will keep the license server - otherwise you will need to reinstall the server-licensing
-
New to virtualization need advice please
Hello community VMWARE.
I'll make as clear as possible, latetly at work (Local ISP) hosting game servers for our customers on servers dedicated small (Linux-based), I started as a cpu P4 with 512 MB Ram and nothing fancy, I hosted multiplayer games online, on these small physical servers games were running great and no problems so far , but with 5-6 servers of game so far these small servers are not manageable and difficult to develop, so put these ATX Desktop case in the server room takes too much space and it is not wise for future enlargement, so my boss asked me to virtualize, there has already been a few virtualized servers, it uses (vmware infrastructure web) He wanted to show me how effective it can be, in his web browser, he created a virtual machine and installed linux on it distribution and given 1 vCpu and 1 GB of vRam and I organized a game about this server, he is actually done as good as my physical servers (if not better).
Now, the dilemma is that my company will order a powerful double nice (Xeon Quad processor cores) with a large amount of Ram (8 or 12 GB order is not confirmed yet) this server will be dedicated to hosting game servers, and of course I'll have to get rid of all these small Desktop P4 servers and migrate to this new which gives the fact that some game servers runs on linux and other windows only, then virtualization is a must!
As mentioned before, my boss has a vamware product that it manages from a web interface (web vmware infrastructure), I want something similar I will be be split this power phisycal server into multiple virtual machines, I used Vmware workstation before and it is quite nice but in this case, I want something more professional and efficient and which balances the processors between the virtual machines in an effective way because the game servers relies more on the processor.
I'm looking for mainly:
-A virtualization platform that sits directly on the server with no OS underliying.
-Controlled via the web interface (if it is possible, but not neccesarly).
-Better management of performance for processors
-Can run multiple operating systems (Linux and Windows) probably up to 5 instances of OS.
Which vmware product can fit the most? After watching and surf on your website, I thought maybe? ESXi? vSphere? VMware vcenter server or?
Please advise and thank you.
It comes with the web interface, as well as the client interface installed. With purchase vcenter you can manage all hosts in a single screen and with additional features like vmware ha, vmotion, and etc. If you shared storage, and depending on the version you purchase.
looking for essential plus the package, it comes at a very low prices and with a maximum power of 3 guests 6cpu bundled license and 1 vcenter.
-
HP ENVY laptop model m7-j020 d: unable to connect to the Internet
I have a HP ENVY 8.1 Windows running. No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).
Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.
E-mail started acting erractically. I tried to restart the computer, and then he started to install updates. Not sure if she did because it does not connect to the internet.
Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.
Restart the PC without installation updates has not improved the situation.
Any help would be greatly appreciated.
flynkites
Hello @flynkites,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!
Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.
If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.
I hope this helps!
Concerning
Maybe you are looking for
-
Started happening today (22/07/2015) - after the re-opening Firefox this afternoon, I couldn't connect to Yahoo, G-mail accounts, as well as other protected by password. Fortunately, I could access these accounts in Chrome. I don't have browsers save
-
Shift registers 'for' loop can accomidate how
Hello I would like to know how shift registers we can add in for or while loop. Thanks in advance, Krishna
-
How to print specific pages does not not in LJColorPro M177
You just bought a new LJ MFP M177 ColorPro works with a Mac in Mac OS 10.6. I want to print specific pages in the HP manual that came with the installation diskettes. No matter what page numbers I can print, they never match the screen pages in this
-
How can I get all of the Office to appear above the task bar?
HOW CAN I STOP ALL THE WAY DOWN MY OFFICE OR WHATEVER PROGRAM TO ADDRESS TO APPEAR BEHIND THE TASKBAR INSTEAD OF ENTIRELY OVER THE TASKBAR, SO THAT ALL PROGRAMS OR DESKTOP IS VISIBLE?
-
plu ctrl line thickness has stopped working please help
When you draw straight lines, I choose the thicker line then hold down the ctrl key and increase the thickness of presing the button "+" several times until the thicknes is what I want. This does not work, could you help please. Thank you, Kevin Youn