HP G62-355DX has BIOS Ver F.29. but the show F.27 HP Web site

Similar Questions

• HP Pavilion dv7-7001sg: HP Pavilion dv7-7001sg has BIOS Ver F.29. but the show f.0Une HP Web site

  HP Pavilion dv7-7001sg has BIOS Ver F.29. but HP shows f.0Une Web site.
  Use f.0Une or F.29?   If F.29 where can I find it?

  (writing of the Germany)

  Hi @gdneon,

  Thank you for visiting the HP Forums! I have Germany.

  I took a quick glance to your HP Pavilion dv7-7001sg Notebook and worried with what BIOS version, you should be on. Your f.0Une system as of March 1, 2016 is the correct version, you should have.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

  Thank you.

• my computer dell laptop has a built-in webcam, but it is not for all Web sites.

  On some websites my webcam won't turn.  It is on Yahoo and AOL, but other less popular sites on what is wrong. Why?

  Hi Peter251,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what websites you are talking about?

  (4) you get an error message?

  I believe that you use Internet Explorer as your web browser, let me know if it's something else.

  You can see the steps in the link below that addresses this issue by Shinmila H

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/webcam-works-on-some-sites-not-others/78df0982-81EA-4754-a8af-3433b12f0796

• My cat sleeping on the keyboard, somehow open CSS Web Developer and has changed the default settings for a Web site so that it appears to about 10px up

  Big hairy cat, who likes to sleep on a hot surface. Given that Windows XP is no longer supported I use Windows 7 and since I write for Mozilla Support a question, it's a safe bet that I don't use Internet Explorer.

  Is it tiny zoomed? You can reset the zoom level on a site by holding down the Ctrl key and typing 0 (that's a zero).

  Or is there a large dark area, leaving only a tiny vision area? This could be the sensitive Design Mode and usually by pressing the ESC key, which clears.

  If is not about money, it might be useful to see the screenshot. This article has tips on this: How to make a screenshot of my problem?

• I installed 4 GB of RAM in my computer Windows XP which has detected correctly 4096 MB, but the system information that 2 GB of Ram available.

  I recently installed a maximum of 4 GB of RAM for my Win XP Home computer: four tips of 1024Mo in 4 available memory locations. Story: It came with 512 MB of RAM (256 MB two cards to 2 of the 4 slots). I sometimes treat files large image or video in a few applications, and if I do too much without saving the files, I get something like "...". not enough memory to complete... "and can not save either and lose an hour or two of work, all frozen, treatment and once had to turn off the computer by pulling the power plug (nothing else worked). Later, I added two boards of 1024 MB and moved the two 256 MB for the other two locations. The computer has detected correctly the RAM and showed 2,560.00 of available physical memory total MB of RAM in system information and available physical memory 2.00 GB (currently about 550 MB, current process). I put 4 GB page file. That helped a lot with the processing of these applications, but if do not attention, the same "...". not enough memory... "thing and I lost the job. So I added another 2 identical cards of 1 GB replacing the two planks of 256 MB. The 4 GB of RAM, I've added exact IS correct type for my computer. Set the pagefile to 1.5 times RAM available, etc, so that's it of OK. NOW THE PROBLEM, if it'S a PROBLEM: in the information system RAM is detected OK, showing 4,096.00 MB total physical memory, BUT not much more available memory: 2.16 GB available physical memory! Total virtual memory 2.00 GB remains the same in both cases, even if I put the pagefile of 12 GB. Page file space shows what I put in more added about 2 GB.
  SO THE QUESTION: Is all the 4 GB of RAM (essentially) available for use with my operations high megabytes to image and video processing applications?  Or is Win XP steal my RAM and makes the page file? What happens here? You wish to know if I've lost $120,00 on two more strips of 1 GB of memory. Thanks loads, if someone can tell me.
  Did not have a pretty good test in image/video applications to find out if I won anything yet. Always the same 550MO ongoing process. And Yes, I spent hours on the things in forums of online learning on the page file and RAM, most of which I knew already, but there is no explanation on the information system does not more than 2 GB of RAM available.
  Thanks loads, if someone can tell me.

  "My OS is Windows XP family 32-bit." End of the story for the possibility to use up to 4 GB of RAM. No, there is no way to magic, you can force a Windows 32-bit operating system to use all 4 GB of RAM. There is a difference between the question of whether a motherboard will support a certain amount of memory and an operating system be able to access memory. Sorry, you missed this fact in your research. Oh, and if you want to try one of the many Linux distros do not forget to use a 64-bit - after checking your processor is 64-bit also. That yours is not.
  MS - MVP - Elephant Boy computers - don't panic!

• Verizon yahoo homepage has small size and impression but good with other browsers and other sites web ok

  The home page appears small with the fine print. May not have to change with minimize - maximize by clicking. Works fine with other browsers. All other pages web email ok. Using windows 7

  The enlarge/restore button changes the size of the Firefox window, not the content of the web pages.

  You may have accidentally zoomed out on this site, or the site may just have a text that is smaller than the others.

  1. To restore the zoom level, hold Ctrl on your keyboard, then press 0 (the zero key).
  2. To increase the zoom level, or hold CTRL and use the mouse wheel, or hold CTRL and press +

  For more information, see the following article:

  • Font size and zoom - increase the size of web pages

• HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

  I have seen this problem posted a few more times, it seems that it is recurring.

  I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

  The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

• I have attached my keyboard wireless 1. 0 has to my new computer, but the shortcut keys do not work.

  I have a new Windows 7 computer, to which I added my keyboard and wireless mouse 1. 0a.  When I tried to load the software Intellitype Pro 5.4 and Intellipoint 5.4 I get an error of incompatibility.  Shortcut keys do not work.  I think I need new software.  Can help you.

  Hi jamesMacmillan,

  Try the latest version by first link is for 32 bit and second link is for 64-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=0B806F53-A8B8-4E10-9B4D-23F85040AE93

  or

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=489e92c6-0946-4CF9-8E0F-fa1db4fe7b9c

  Concerning

  GT4U

• HP Officejet Pro 8500 best has come out very low but the printer works fine.

  I was always able to make great copies.  The quality of the document that I copy is excellent and I've copied before.  Now everything I copy is very low and cannot be read.  The printer works without any problem.

  Hey 1265yankee,

  I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one.  Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?

  • Unplug the printer while on
  • Unplug the other end of the power cord from the wall jack directly
  • Wait 30 to 60 seconds
  • Plug the unit back to

  Also, take a look at the steps in the document found here.  The document is not directly applicable in the present case, but the steps are the same for your question.

  Let me know how it goes.  If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.

• Photoshop has crashed. I restarted, but the file is no longer there.

  I am a student and I had finished my work on photoshop when the application crashed. I went to re open and the file was gone. I was wondering if there is a place where AutoSave files are stored?

  See this thread: Photoshop: how to recover a file auto-sauvé after a crash? Community customer Photoshop family

• Help, please! Illustrator has a very long download, but the final does not load.

  Hello! Help, please! I bought the original version of Illustrator, there is a very long download, but the final does not charge, what should I do?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Acer Aspire AO722 BIOS ver 1.11

  My Acer Aspire AO722 has BIOS version 1.08.  The Acer Support downloads for my netbook page lists the latest BIOS ver 1.11.  What changes or improvements in the latest version of the BIOS?  I had to upgrade to the latest version?

  If you don't currently have problems, there is usually no reason to update the BIOS.

  v1.11 brings a specific modification of Windows 8 for the BIOS

• 2.60 BIOS does not work on the Satellite A200 - 22 c

  Hi all

  I made the mistake to Flash my old bios Satellite A200 - 22 c (PSAE6E) to the new version 2.60.

  As I did this, the keyboard does not work on the bios screen, so I am unable to manage anything in the BIOS.

  When Windows Vista 32B starts the first time, the keyboard does not work. If I close the session and then I it again, it works correctly.

  The touchpad is lost and I need to use a USB mouse. Is not a pilot cause problem, all the drivers are updated and are working properly.

  The question is: why Toshiba didn't allow users to download the old version of the BIOS? ¿WHERE or who do I contact to get the original BIOS? Why do the flashing utility make a backup of the OLD BIOS and then does not give you the ability to recover it?

  Please, help me to recover the original BIOS to retrieve my keyboard and my touchpad because I can´t find any message or anything like that to get in touch with the technical support of this web site.

  Thank you!

  Which version was old BIOS?

  By the way: you can contact Toshiba. They have access to the Archives of BIOS and they can provide you with older version of BIOS.

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• G62-355dx replaced cpu still does not

  My g62-355dx still does not work after replacement of the central unit (this is what has been flashing caps lock code... flashes once every few seconds) so after replacing the cpu I always get the same flashing... tried the hard reset code before replacing the cpu but haven't tried after... I just need to know if its perhaps the card mother and if a motherboard from a model different g62 will work in my 355dx...

  This is the third post of the kind that I put in service in the last month or so and I will repeat what I have always supported. It is almost never the CPU, regardless the blink code. It is almost always the motherboard. Your bet by far safer is to replace like with like that probably another g62-300 series motherboard will work, if it offers all your function doesn't not or vice versa, it may take a few case mods do go up and you want to avoid this.

  You will need the maintenance manual:

  .PDF of manual here

  Your motherboard reference number are located inside the memory compartment. Message if you want detailed help find a replacement.