HP laptop - 15-ay015nx: audio come from two headphones and speakers

Similar Questions

• Sounds coming from my headphones and speakers at the same time - Alienware M17x R4

  I have a rather annoying thingy with my laptop. When I do something on my laptop where noise is involved ( play games , play music , etc. etc. ) and I have ear plugs / headphones inserted , the sound is coming out of both my speakers and my headset.I do not know how long I already have the problem, I discovered it today when I took my headphones off for a moment.
  
  Do any of you know how I can fix this? So that if I insert my headphones , the sound just goes through the headphones and not through the speakers at the same time. I Googled for a while now but I cant find a way to solve it. (Im not a PCs / laptops expert)
  ...
  
  I use an Alienware M17x R4 with Windows 10.
  
  I have already tried to update the drivers , remove and restart to reset them but nothing seems to work, PLEASE HELP!
  ...
  
  Thanks in advance.
  

  Hello. Please post your problem again, because half of your text has been cut. You may need to type it instead of paste.

  Try to switch to the native Windows audio driver.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on the Creative Labs Recon pilot.
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Recon pilot, do it again but reverse steps 2-7 names].

  If you have only the symptoms with one of the drivers, then the other is at fault. If you have the same symptoms with two audio drivers, then it is likely not a driver problem, maybe material.

• After XP downgrade, sound comes through the headphones and speakers

  Hi family Forum,.

  Recently, I've killed my dv2615nr Pavilion from Vista to Windows XP. Managed to install all the drivers and then followed the advice of CherylG (to whom I owe my ability to do something with this laptop, frankly) for the operation.

  My problem is that connect my headset does not cut the sound on my speakers.

  I tried reinstalling the drivers by following the advice of Cheryl G but it returns me to the same problem.

  Can someone help a newbie?

  @Kobby

  Your sound chip is Venice, that so difficult to find it running under XP,

  Try to use the related CherylG, modded by silver driver files almost a year, but replace this file WiSVHe5.inf

  Perform the same procedure to install it.

  Please, remind you that you need to Uninstall the driver before running all the new drivers, go to control panel, uninstall the audio driver from Add/Remove Programs, restart.

  If this mod does not work, try to use other models of HP that use chips from Venice, however, the pilot did not smartaudio ability.

  BTW, when he was to do Vista sound have smartaudio option in the Panel?

  These models are 520 HP and HP 530

  You can try to play with him, but my guess ports setting best are different.

  here

  FTP://ftp.HP.com/pub/SoftPaq/sp41501-42000/sp41836.exe

  You must manually extract and force it to run by using the Device Manager.

  The

• Satellite L500 - the sound coming from headphones and speakers

  Hello world

  My problem is about sound.when I put the headphones in my laptop, the sound just two headphones and speakers.
  How can I solve this problem? If can't, I can't use my laptop in attendance.

  Hey,.

  What OS is currently installed on your computer?

  Is the headset itself works because you can listen to the sound with headphones so for now I doubt s a hardware problem

  In any case, perhaps the problem is only linked to its driver and updated it could solve the problem in your case, I would check the Web from Toshiba site to download the latest version.

  Check this box!

• Audio - headphones and speakers at the same time playing

  My kaptop is an Asus G53sx running windows 7 premium 64-bit. It has a generic realtek built into the sound card with the latest drivers.

  Currently, no sound from my speakers if no headset is plugged into the headphone jack. However, audio comes from the speakers and the headphones if headphones are connected. In addition, audio workstation inhibition translates the speakers muted, but the headset remains reactivated.

  Things I've tried:

  Disable/re-enabling sound devices.

  Play with audio devices by default.

  Play with sound priority application settings.

  Reinstall the drivers.

  Uninstalling the drivers, let windows install generic drivers, reinstall the drivers.

  Resettlement of former drivers from the manufacturer of the disk.

  Using the generic windows drivers.

  All these have resulted in the same symptoms; No sound when no helmet, not his from the two devices when Yes headphones.

  I see from the description of the model, he has Creative EAX supported sound card and not from Realtek. If you have installed the Realtek drivers, there may be problems of work. Make sure you install the correct driver, reboot the PC and then check.

• Inspiron 17R SE 7720 - Audio from headphones and speakers

  When I plug my headphones, sound still comes from my speakers.

  The popup asking what device I plugged is no - longer everytime I plug my speakers - but it does to the microphone socket.

  It is difficult to say 100% for you that it is a hardware failure, because it is not a diagnostic test. If you Win10 you could go back to the operating system in which decision worked and see if it still works here.

  If you have the original operating system came with the laptop, you can perform a recovery of the system (original return the laptop to the factory setting). This will be the fix or confirm that there is a hardware failure.

  To the best of my knowledge your model of laptop doesn't have a replaceable audio port circuit. If I'm wrong on this subject you will need to replace the motherboard to replace the Jack unless you can perform work on the motherboard. You could qualify for something being folded.

  A simple solution is to get a USB input audio cheap and use it for headset and your internal audio system when you want that the speakers to play.

• I received an email that appears to come from Windows Live and request team I answered and confirm several pieces of personal information

  I received an email that appears to come from the Windows Live team and contains MSN icons.  It is said that it is the final notice about a update of 2011 and asks I answered and confirm several pieces of personal information within 2 weeks or my account will be permanently closed.  He asked that I come home from a series of letters to confirm the validity of the email.  It is said that it is because there is a change in the service.  This is spam and if so, how to report, because there certainly seems genuine, but looks very suspicious.  The sender is * address email is removed from the privacy *.

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Help in mandatory query - pulling data from two tables and inserting a

  Hi all
  
  I need your help for the modification of the query to get the desired result.
  I have two tables A and b. using source Insert and select the command, I need to extract data from tables A and B, then insert and C.
  Data and table structures are available below.
  
  Table (Source Table)
  
  Status of payment $
  MUL DC 20
  ONLY DC 20
  ONLY 40 PA
  MUL NY 50
  
  Table B (Source Table)
  
  State of lang units
  E DC 10
  S DC 10
  NY E 5
  PA S 5
  
  Based on query, I need the values in table C as mentioned below.
  Table C (Table of Destination) (necessary output query must also be as below)
  
  The State value
  
  PA 8
  DC 1
  
  My query is
  
  INSERT INTO C(STATE,VALUE)
  SELECT A.STATE, SUM ($) /SUM (UNITS)
  OF A, B
  WHERE PAYMENT = "SINGLE".
  AND A.STATE = B.STATE
  GROUP OF A.STATE, B.STATE
  
  But the output I get is
  
  PA 8
  DC 2
  
  Essentially to DC, I should get 1, i.e., for payment only $ DC is 20 and divided by 20 DC must be 1.
  Let me know where I'm missing.

  Hello

  It will work you need to add units in the group by clause

  SELECT a.state, SUM (dollars) / units
  FROM a, (SELECT state, SUM (units) units
           FROM b
           GROUP BY state) sub
  WHERE payment = 'SINGLE' AND a.state = sub.state
  GROUP BY a.state, units;
  

  Concerning

• Audio playback through headphones and speakers

  Headphones or speakers in windows 7, it cannot have them both?

  Looked at other issues, nothing seemed close.

  My machine has dual boot, Windows 7, XP and Vista ultimate and now XP. In XP and Vista I have the speakers and headphones plugged together, playerd noise, so I could use one or the other by plugging them in front and back taken audio.

  This allows me to play during the day with speakers, and then at night with headphones and no round reaching under my desk to remove the cables.

  Now I use windows 7 and many other issues I have with it, I can't play with speakers or headset until I went through a lot stupid click on deactivate one or choose the other as a default value. Why this has been changed in windows 7 after Vista, it seems totally useless logic. I can turn off my speakers with the power button and get the helmet works. Now, I'm either or. So my new IR headphones are wasted. Please, someone tell me there is a work around?

  It's little interference silliness like this that give me want to stay under XP.

  Much thanks in the meantime someone has found a work around.

  I have my Jabra GN9350 both my speakers for computer, audio playback at the same time. :)

  Here's the trick (and it is verified on 3 other systems Win 7):

  (1) R click on your speaker icon, select "Recording Devices" (if you have the sounds dialog box to the top, it's the 2nd 'Recording' tab)

  (2) click on R in the white space, make sure that the TWO "show disabled devices" AND "show disconnected devices" is checked.

  (3) * now, this step will take some thought for each computer used: on my laptop (HP Elitebook) I get a "Stereo mix" device, ACTIVATE this device.

  4) click on properties, click on the "Listen" tab

  (5) check the box 'Listen to this device', also change the drop-down list below 'read through this device' to be your second audio device

  -To check that you have done this correctly, go back to the tab of the dialog box sound reading, you should now see two of your audio devices showing green graphics small displacement.

  Here are the specific parameters that I have on my laptop, maybe this will help you with your settings:

  Speakers - GN9350 (by default the communications device)

  Speakers - SoundMAX Integrated Digital HD Audio (default device)

  Feature 'Listen' stereo Mix - point this device on my GN9350 headset.

  Paul

• No sound from headphones and speakers.

  Original title: map its maybe broken

  Recently after taking my laptop on a short trip, I put to the top and turned on to find that the sound wasn't working. The speaker symbol had an x close to her and says that no devices were installed. After some messing around, I reinstalled the sound drivers, and now the speaker symbol is back to normal, but acknowledges that my monitor (not my headphones and portable speakers). Because my monitor has no speakers, this does not work for me. I've been trying my brain, tried everything, but nothing seems to work (helmet, not wearing a helmet, reinstall the drivers, active services), and I wonder if this means that my sound card is broken. I had problems with it in the past.

  Thanks for your help

  Hello

  I imagine the inconvenience that you are experiencing.

  What is the brand and model of the computer sound card?

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  You can follow the steps in the Microsoft KB article and check if it solves the problem:

  No sound in Windows

  http://Windows.Microsoft.com/en-CA/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Also check these links for more information:

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows/sound-cards-FAQ#1TC=Windows-7

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-my/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• No sound from the headphones and speaker sound is crackly and distorted

  Original title:

  Audio problems

  Taken my headphones do not work when I plug in the headphones and the sound of my speakers is now crackley and distorted, any help?

  Hello

  1. have you tried to connect the headphones on another computer?

  2. What is the brand and model of headphones?

  3A this works much earlier?

  4 you did changes to the computer before the show?

  Method 1:

  Run the audio Troubleshooter that might help us diagnose the problem better.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Show disabled devices and headphones as a default value.

  Exercise the functions mentioned below to set the headset as default:

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the "read"tab, right-click in the window and then click Show disabled devices. "

  d now check if the headset is listed there and right-click on it and choose allow.

  e. select headphones and click on ""as a default ". "

  Check if it works.

  In addition, see the following links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps!

• Is it possible to route audio via the headphones and speakers at the same time

  I'm trying to figure out if it is possible to play sounds through a pair of speakers connected to the output jack for headphones and also have the sound out of speakers, so. I know it is not possible using the audio controls integrated in the System Prefs, but maybe he thought that there is a 3 rd-party app that could do it.

  AFAIK, it is possible to read audio data through the internal speakers or the headphone output or another output as speakers USB or Bluetooth device, or a DAC, but not the internal speakers and headphones something plugged into the outlet.

• Computer laptop Windows 7 wakes up from sleep, Hibernate and shutdown

  I have a laptop running Windows 7.

  My laptop stop or switch mode standby/hibernation, only to wake up a second later. BUT, it does so only when my power adapter is plugged. I was able to disable this to happen before using the command prompt. After update, however, my laptop seems to have this setting reverts? It would be the third time I had to correct this problem. The problem is, I was stupid and did not write down the command, I used to fix the first time OR the second time and I don't remember what it is.

  When I use the command line powercfg - lastwake brings nothing to the top and nor powercfg - devicequery wake_armed. If it does not help things.

  Anyone know which command I would use to stop my charger to wake up my laptop?

  Hello

  Disable allow timers wake in power options

  Also uncheck allow this device out computer under powermanagement management properties - network - peripheral cards
  hope this helps

  Wake timers have already been disabled and "allow this device to come out computer" was already unchecked. Sorry, but none of those who have the problem. The charger is what wakes up my computer...

• Noise comes from the computer and is very slow

  I just got a new power supply because there was an amber light and installed after the computer is very slow and makes a grinding noise and the fan is ruining very hard.

  My pc is a Dell XPS 410
  Windows Vista SP2
  Here's the part
  1DJ301Kit, mouse, Universal Serial Bus, 2BTN, optical, Lead Free Black1DT240Card, graphics, 7300, weak encryption, MRMGA10, 22X8388Dual In-Line Memory Module, 512667M, 64 X 64, 8, 240, 2RX81HF730Display, flat screen, 20W2007WFP, black, Dell Americas Organization1KJ293Assembly, Panel, fill, floppy, TANK, Workstation1DY654Kit Precision drive, software, works 8.5, Office TRIAL, English1JF495Modem, V.92, Data Fax, SON2 internal, without lead, Dell Americas Organization1MY531Assembly, DVD +/-RW, 16, TSST SATA , READER Black1JX718HARD..., 250G, S2, 7.2 K, 3.5, WD-HAWK0149DFINFORMATION..., PREPARATION MATERIAL..., DEVIATION..., PRECISION WORKSTATION... INCREASE..., #21TH659PLACEMAT..., GETTING STARTED..., DIMENSION..., SYSTEM PERFORMANCE EXTREMES..., 4101YH251GUIDE..., OWNER..., DIMENSION..., PERFORMANCE EXTREMES SYSTEM..., 410, ENGLAND/ENGLISH... 1HU608Kit, software, Norton Internet Security, 2007, 15MTH, English1RH659Keyboard, 104, UNIVERSAL SERIAL bus..., UNITED STATES..., Black, DARFON ELECTRONICS, Corp.... 1JW762Kit, software, packaging, digital video disc VHP32 Drive English1UH837Kit, Speaker, 12V, AS501, Nmb Black001323INFORMATION...,..., CHASSIS NO ITEM1DH108ASSEMBLY......, DIMENSION 9200/410, PWA INTEGRATED... 1JX144Processor, 6300, 1.86, 2 M, Core Duo-conroe, Burn 21NJ131INSTRUCTION... L6 CHAS DEVIATE ON L5.51XP850Assembly, radiator, protective, MATRIX TANK DESKTOP...

  You probably have a hardware problem.

  grinding noise refer to metal on metal contract-fans, hard drive, everything that revolves.
  noisy fans mean generally the CPU is running too hot (for some reason any).
  If you know enough about the material to troubleshoot/fix the problem, Best Buy/s Geek Squad of free basic diagnostics, they will check it out and let you only know what they think is the most likely cause.

• Need to separate the headphones of speakers on x 51 but does not open realtek, only audio alienware

  Basically, I need to open the Realtek program, but it seems to be more written by alienware audio because it is in my list of installed programs, however, when I try to open it, the only option I get is to uninstall it, after watching a few videos of how find and open the ect, it seems that the audio alienware is instead the realtek program.

  I am wanting to split the sound from my headphones and speakers as currently it comes out both when I want music on my speakers and Skype through my headphones. I know that realtek has an option for what you can do two different audio channels. Earlier when I plug my headphones, it records under involved as well and not a separate playback device. Audio Alienware does not have this option and as I said, Realtek won't open.

  If anyone knows how to get Realtek to open or has a work around fix I would be grateful, thanks in advance.

  It looks like your drivers are twisted. Others have reported similar problems. I don't have this machine. If you solve this problem and use your analogue headset, try uninstalling all audio drivers (and their audio control panels) and try to install the appropriate drivers. Maybe even leave the Windows driver load.

  But you know what would be the easiest?

  Buy a cheap USB for Skype headset. It will use the "sound card" in the headphones. In addition, it is digital for all.

  http://www.Amazon.com/Plantronics-GameCom-780-headset-surround/DP/B00B1KJK22/ref=sr_1_1?ie=UTF8&QID=1424380477&SR=8-1&keywords=Plantronics+gaming+USB

  or

  http://www.Amazon.com/Logitech-Clearchat-comfort-headset-black/DP/B000UXZQ42/ref=pd_sim_e_5?ie=UTF8&refRID=0J0H506KN8KF79G8NA4A

  EDITED: Oops, this other helmet was analog. These are the two digital USB with its built-in card circuits. Corrected message.