HP laptop: buffering every 10-12 seconds with audio streaming

Similar Questions

• White screen; Caps lock will blink twice every 2/3 seconds with the orange wireless button.

  Hello

  I use my HP Pavilion DV6 7023tx laptop. It is 1 year 3 months older (warrenty expired). It was working fine, but one evening that I found it start with black screen and caps lock blink twich all the 2/3 seconds and after some times it gets hot.

  I tried to solve the problem on the following link accoroding

  http://support.HP.com/us-en/document/c01732674

  It looks like failure of corruption BIOS. but it will not automatically recover as mentioned in the post.

  So, what should I do now?

  Could you guys tell me what to do?

  Thanks in advance.

  Product information:

  ===============

  HP Pavilion DV6 7023tx

  Series No.: [personal information]

  Product ID: B3J66PA

  Hello SuperMario1,

  Thanks for your reply.

  The last thing I did, remove the CMOS battery and after a few minutes I plugged it.

  Then plug in the power adapter and press the power button / stop.
  Laptop starts but gives an error message

  'The CMOS checksum is not valid, the BIOS will be reset to the default configuration and will be rebooted.'

  

  Finally, laptop starts normally. It works very well...

  But same problem when I restart

  "Caps lock shift white blink screen 2 times all 3/4 sec.
  

  So finally

  1 remove the CMOS battery and after a few minutes I plugged it again

  2. connect the power adapter and press the power button / stop

  3. laptop starts normally (with one identical to the previous error msg)

  4. upgrade the bios to F.29 (previously I had F.24)

  5 Everythings works very well (start/stop have no effect)

  

  Marechalle Chandra Modak

• Error when, with audio streaming via HTTP to the Simulator

  I use JDE 4.7 and 8900 Simulator.  I'm trying to listen to an MP3 via http to a blackberry app.  When you use the BufferedPlayBack example screen, I get the following error when the data source is trying to open the connection - "net.rim.device.cldc.io.dns.DNSException: error trying to solve.

  When I enter the same URL in the BlackBerry browser on the Simulator, I get the following error: "the selected server returned an error when you try to respond to your request.

  When I enter the same URL in my web browser in my PC, I am able to stream audio and play with QuickTime.

  Why I get this DNSException on the BB and not on my local PC?  The web engine runs also locally.  I know that the BB Simulator does not support rstp.  The Simulator also not does support streaming over http?

  This is the URL I used:

  http://myLocalMachine:8080/myMusic/anAudio.MP3;deviceside=true

  Thanks in advance!

  T

  I found a solution to the question in the thread below.  I increased the connection. MaxNumberOfKBytesToSend = 10240 in the... File MDS\config\rimpublic. Property and so was able to sucessfully stream mp3 to my request.

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Regular CPU spikes every 15 seconds with USB 2.0 audio, fix, but refuses to install.

  When streaming audio via the audio interface USB 2.0 Audio Class Compliant on Windows 7 Professional 64 bit update, there's regular CPU usage spikes up to 100% every 15 seconds, sometimes amounting to audio dropouts. Utility LatencyMon v6.5 reports that huge amount of CPU time is spent inside the usbport.sys driver whenever there are any audio stream of isochronous USB happening. I know that there is a supposed to be available to target exactly this problem - https://support.microsoft.com/en-us/kb/981214 fix - but the fix refuses to install, probably because the fix itself is quite old and does not seem to recognize the latest versions of the drivers usb*.sys on any instance to date of Windows 7.

  I have tested and confirmed this problem on two different mobile-class workstation laptops from different manufacturers, both based on Intel 7 series / C216 QM77 chipset (Panther Point) and using the integrated chipset USB host controllers to connect to the audio interface (a 18i20 of Focusrite Scarlett). One of the laptops has EHCI and controllers xHCI routed to different physical ports, the other laptop has all the physical ports connected to xHCI; It might be interesting to note that the problem seems identical to the audio interface is connected to EHCI or xHCI. All other possible causes that usbport.sys were eliminated by a careful configuration and the measure, i.e. There is no limitation, no turbo CPU, no CPU C-State, not of processor HyperThreading, no food, no virtual memory paging management event, not even any SMI (System Management interrupt) passes, everything boils down to usbport.sys hogging the CPU.

  It would also be interesting to note that according to Intel, there are a bunch of bugs known to host USB controller Series 7 / C216 chipsets, one can find an Errata section detailed from page 15 of the document Spec update - http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/7-series-chipset-pch-spec-update.pdf

  Could this problem hogging CPU actually come from bugs in the hardware host controller USB drive operating system driver nuts? Or it comes from a bug unrelated in the OS driver? And what happened to the existing of the fix, why he refuses to install the operating system to date and how is the same old problem suddenly reappeared on automatically updating Windows 7 systems?

  It is in any event, that my most sincere and humblest hold like a paying customer for a hotfix update fix this if possible, one that is truly committed to settle. Without corrective work, Windows 7 machines are quite useless for all serious audio work. I also feel that I speak not only for me but for all members of the global computer audio community who are trying to use Windows 7 with audio USB.

  Just upgraded my Windows 7 Professional for Windows 10 Pro and the issue hogging CPU is now gone - no pics no CPU more, more dropouts no audio USB. (It would still be nice to have a fix for Windows 7 someday, too)

• try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Re: Satellite L500 - fan power switch every 5-10 seconds

  Hello

  I have a new Toshiba satellite L500 1XX with i3 and I installed the 32 bit OS.
  Starting from the first start, the fan is acting strange every 5-10 seconds it started working for 5-10 seconds then stops for 5 to 10 seconds, then again, who's going all the time even if the flurry of the laptop stand out with something.
  I think that something is wrong, but was not able to find it. Please I need help
  Thank you

  Hello

  That's ok with your laptop. My satellite that a500 is also like that, even if I surf the Internet, watch movie and CPU shows only 5%. I don't play all the games. It didn't because of the dust because I clean it regularly, installed all the drivers, BIOS updated. The only way to make it quieter to run the fan at a constant speed as 54%, I simply load the CPU with some applications that maintains fan runs almost every time and not boring perceptible noise.
  You can play with the power settings in the power management, but in my case it does not help. And do not decide yet upgrade the Bios, it don't improve you but can kill your knees so wrong.

  Bazlaha, ahi!

• VIDEOS OF BUFFER EVERY 10-15 SECONDS

  My videos, especially on YouTube, constantly buffer every 10-15 seconds. I tried their first stamp with a PAUSE the video and wait 30 to 45 seconds, I tried everything that was suggested, but it continues in buffer. The only way I can watch a video until the end, is to leave this buffer for the execution of all, and THEN, sometimes, it works. But this is RIDICULOUS.

  When I got to my HP Windows 7, videos do NOT put in the buffer. Now they consistantly buffer and he drives me up a wall. I don't have the time to let all buffers videos for execution of all! Someone at - it OTHER ideas, or I come to my Windows XP and Dell computer? I need help.

  mssjerry

  Jerry, welcome to the forum.

  When a help request, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Have you tried to lower the resolution (720 p to 360 p) videos to see if that helps?  Windows XP takes much less power, and is much less complex than Win7.  This can make a difference how to run programs and videos.

  Please let us know if this solved your problem or not.

• I'm typing. You need to hold down every 2-3 seconds.

  Original title: I'm typing. You need to hold down every 2-3 seconds. That's happened? also running slow and jumpy. Too hard to type!

  message is in the title

  Donation thank you for your response.  Yesterday, I turned off the laptop and disconnected everything. When I turned it back on, a black screen came up with the message on the computer that is running a check. I let it do its thing, lasted only 1 minute, and when I've logged on to hotmail and has begun to respond to an email, the keyboard worked really well and even faster than before! I guess that it just fixed itself, thank God my fingers became really painful immobilizes the keys for so long at a time. Thank you all for your suggestions, Jeannie Grama

• After the upgrade to Firefox version 29, the browser crashes every 30-45 seconds, about 15 seconds.

  After the upgrade to Firefox version 29, the browser crashes every 30-45 seconds, about 15 seconds. [Windows Vista]

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• Play NFS on the Satellite X 200 screen freezes shortly every 2-3 seconds

  I recently bought a Satellite X 200 with 2 x GeForce 8600 M GT in SLI.
  Due to the power of 2 graphics cards, I thought about playing games would be no problem.
  But it's not...

  I just bought Need For Speed - Pro Street and installed on my computer. I can't play the game, without the screen freezes shortly every 2-3 seconds.
  It seems that there is not enough power visually, but with 2 x 8600M GT in SLI? Will not take the game run smooth without delay?
  I have all the settings at low temperature and/or offshore, trying to see if that would solve the problem - but no.

  The menus and the intro works very well, but when driving cars in the game, it starts to lag.
  I've updated to latest drivers, but which did not help either.
  My OS is Windows Vista Home Premium, and my memory is 2 GB.

  A problem like this?

  Hmm I think that it of because of Vista.
  I read a lot of articles on issues such games on Vista OS.

  I found some Vista patches and patches but I really not 100% sure if this QFE have reason.

  -http://support.microsoft.com/kb/936710/en-us
  -http://support.microsoft.com/kb/945149/en-us
  -http://support.microsoft.com/kb/936613/en-us
  -http://support.microsoft.com/?scid=kb%3Ben-us%3B940105&x=11&y=9

  PS: on this page you will find an interesting discussion about the game on Vista OS
  078 http://www.Computerworld.com/action/article.do?command=viewArticleBasic&articleId=9011 & pageNumber = 1

  Hope that this could clarify the issue

• Satellite L850 audio stuttering every 10-20 seconds

  Only it bought about a month ago, but last week I had a problem with a kind of stuttering/screeching noise every 10-20 seconds each time I'm listening to something.
  This happens in iTunes as well as if I'm streaming something online.

  I checked all the audio drivers that seem to be up to date, and I've updated the BIOS as well, but nothing seems to work.

  Any other ideas on how to sort?

  If this thread may be useful for you?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67087

  It seems that your problem is related to the same theme, the Graphicleaf user has reported it.
  It seems that the DPC is the problem.
  Auditor of latency DPC and LatencyMon Tools freeware might help you to check what service/process could create such delays

• data collection ignores every 0.5 seconds

  Hello

  I use a NI9205 to collect four different load values outputs plus a NI9236 for several values of deformation using the attached VI. For some reason, during check-in for several more seconds, I noticed that the charges on the 9205 jump a single data point every 0.5 seconds. I have a frequency of 100 or 200 points per second recording, but the question is when I try to plot these data. The following values are moving in where gaps should be, so the end of 3 executed same second, the values of load and strain are off by 6 hundredths of a second. When I export the data to an excel file, load values cascade not upward, but variances are always a problem, because they are visible on the drawn line graphs. I know that's not a problem with data acquisition, because I ran a similar program in DasyLab who had no problem jumping of data, but it only happens with the 9205 (not the 9236), so I'm confused here.

  Any help would be appreciated!

  

  Save the sass, we're all just here to help

  hhart, your loop of consumers is directly dependent on your loop producer via the reference queue and cluster of error. In other words, that they will not work in parallel, since the consumer loop will wait for the loop of producer to stop before handling the queue.

  Here's how the producer/consumer with a queue should look like:

  

  Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

• Why my (wired) laser mouse keeps freezing every 2-5 seconds and then turns off?

  I use Windows XP Professional SP3, and my (Genius NetScroll G500, USB) mouse keeps freezing every 2-5 seconds, until he "dies" (I can't move or something, it's like off). Sometimes, it works normally, sometimes doesn't. I don't really know what causes to keep freezing. This problem does not occur on Linux for now. I download the new updates, but I do not expect any kind of positive results, so please do not respond with driver update. Could you please tell me what to do to fix it properly? Note that the mouse is brand new, bought today.

  EDIT: It seems that Safe Mode fails.

  Hello

  I suggest you to connect the mouse to another computer if possible, and check if the same problem occurs, this is just to check if it is the problem with the mouse.