HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

Similar Questions

• 'Windows not will mark the Ad Hoc network'

  Hello

  User of the computer without experience here.  I have an iPad that works very well if I have WiFi available.  I don't have WiFi at work, so I am interested in the connection through my work Windows 7 computer, which is connected via a connection to the local network.

  I did everything according to the instructions on:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  However, when I put my key name and the network security and press 'Next', I get the message, "Windows could not configure [network name]."

  There is no other error message and no indication on what I could do so that Windows is able to put in place the ad hoc network.

  What should I do?

  Thank you

  Rob

  Hello Rob,

  Thank you for the update.

  As you said that the computer is connected to a domain network, I would like to advice post you your query in the TechNet forums because they have more expertise on these issues. Follow the link below to do the same.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• MacBook can not connect to the printer by wireless B110

  Hello

  Whenever I have enable WPA or WPA2 on WiFi security, my Macbook will not be able to print/scan to the B110 printer via wireless network, if I can access the printer with the IP on my browser and scan from the web interface. The PC in my house has no problem. In addition, my Macbook can print/scanning to the printer without any problems if no guarantee is enabled for the wireless network. What is the solution?

  I tried all the suggested solutions, including resetting the printer to the pref, uninstall the HP software, but in vain.

  Config:

  Mac OS X 10.6.6

  Updated to the latest HP printer driver (version 3.2)

  Router: A level WBR-6011

  Thanks a lot for your help!

  Richard

  It is a router that is provided by your ISP?  What is a DSL or FIOS service?

  If so, we will reinstall the printer this way:

  -Unplug the Internet line, which runs between the router and the wall
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter your router's IP (its on the self test print) in the entry door and the first DNS field, leave the second blank.

  -Click 'apply '.
  -Finally, plug the Internet line, restart the router and the test.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Photosmart HP 7520: ip address for web services is not on the printer properties

  Printer is a HP Photosmart 7520, I have this printer is installed on computers laptops HP two and two are running Windows 7 Pro.  On one of the laptops (mine), when I click on devices and printers, and then right-click on my default printer that is the 7520, it has three tabs.  The third tab shows 'web services' and has an IP address for what should be the EWS page.  The property intellectual property which are listed there is an old IP address that has been recently changed.  What should I do to update that.  The fact that it is bad does not seem to affect what anyone.  The printer works perfectly to include web and eprint services.  What is also interesting is on my other laptop (of woman) which is identical to mine, the web services tab is not yet here when I click on the printer properties. I passed to the EWS page and checked the network tab.  All right.  I went to the Assistant printer HP, clicked on utilities and used the IP update.

  Hey @DennyC,

  Personally, I believe that if it ain't broke, don't fix it. If everything works as it should, that you have tested and it does, there is not need to change this list in the frame. If you want to try it though, with the exception of my first two ideas you already have tried, uninstall and install the printer is all I can think about. Right click on the printer in devices and printers, and then delete or remove. Run the HP print and doctor Scan to install the printer and check the settings.

  See you soon!

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• USB does not fit in the printer

  Have a deskjet 1050a and USB does not fit into the printer.  Help

  Thanks I found one.  Printer downloaded and everything got set up.  (except that it took me 2 days to do it).

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• HP Laserjet P3015dn: P3015dn pilot will not connect to the printer

  Hello. We provide that HE supports for a number of hotels, and for about a month, we had problems with a number of printers P3015 different properties not being not able to print. This is shared through Windows 2008 R2 servers network printers. The problem when the drivers are installed directly on the computer of the user (Windows 7 Pro).

  The printer is connected and accessed via a web browser. When a test page is sent, no data seems to go to the printer. There is no error in the printer event log. After awhile, an error is displayed for the printer in "devices and printers". There is no specific error given.

  The installed driver is universal PCL6 because there is no specific driver for this printer.

  I would like to know if it is a common mistake that has resurfaced recently. For the moment, we have this problem in 4 separate hotels. P3015s most are a few years old but is new and still under warranty.

  Update: installing drivers PS does not solve it either.

  One of my colleagues managed to solve the problem of despair. Seems the printing services for the port has been disabled on printers. 4 printers in 4 different sites. Don't ask me how it could happen, but that's all you need to do...

  ENABLE 9100 IN MAMT. PROTOCOLS

  

• HP LaserJet 200 color M251nw: delete the print job?

  This should be very simple, but my grandma brain can't seem to find where to delete a print job from the printer.  Someone at - it help him?

  HP LaserJet 200 color M251nw with Mac OS X 10.10 Yosemite

  Thank you!

  Cindy S.

  There is nothing like you have had on the inkjet.  LaserJet is very fast that so generally they do not need store work as they are printed as they are sent and receive jobs one at a time and sometimes hold jobs in memory according to the size and the number of jobs received at the same time.  Only way to cancel is to hit labour to cancel it or the 'X' button depending on the model.  Storage of the work is available on some LaserJet of top-level with HDD storage, control and retrievel of jobs, but most of the time with the LaserJet you do not have this option.  Printers large format HP also have the possibility to store jobs (location and nesting), change the print order, etc., but again, what are printers with hard and special drivers built into the software to handle these tasks.

• LaserJet Pro 200 M276nw: Changing the print settings

  I want to print in black only.  When the print dialog box appears, the ONLY option is standard. There is no color/quality Option or the Option advanced as indicated in the manual.  There is no manual control.

  When I open system preferences, as suggested, I get the screen which gives me once again NO parameters.

  

  Hello
  Follow the steps below to print using black ink only, these are accessible from the print itself, dialog not print & Fax:
  
  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.
  
  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  3. Select Type/quality paper in the menu dropdown.
  
  4. you may need to click the triangle next to color Options of spending parameters, you will find the levels of gray or black in this dialog box.
  
  You can save the settings for later use by clicking preset > save current settings as preset... a used preset by default remains until you select any other preset.

  Shlomi

• HP LaserJet 4050: HP LaserJet 4050 drivers: image of the printer to the Download Page doesn't look like my printer

  I'm looking for drivers for a HP LaserJet 4050. The image of the printer on this page looks nothing like the printer I have. HP has a mistake? I downloaded the universal print driver from what I found; I sometimes get error messages when I print so I think that I don't have the correct driver. Help is appreciated. Thank you.

  There are a few printer HP LaserJet 4050 Series printers, and you can find the drivers for all the models here.
  
  I hope this helps!
  
  Edit: Wrong link. Try hereand here.

• Lost HP LaserJet 1100 disc lost for the printer and the need to re - install urgent! the printer

  I have a HP LaserJet printer and have lost the disc. I need to reinstall the printer so I can print the document again and I also tried the installation procedure. Help

  Hello

  You can download the software here...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=14925&prodTypeId=18972&prodSeriesId=25470&swLang=8&TaskID=135&swEnvOID=228

  Tricky