HP M602: M602 takes a long time for the first page of the printer

Similar Questions

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• Reading text file takes a long time after the first time

  Dear experts LabVIEW,

  I'm having a problem with playback of text file. I'm reading only each Nth line from a file to preview with this sub vi:

  

  I seems to work the first time I do it well. The loop takes almost no time to perform an iteration.

  Then when I load the same file with exactly the same parameters an iteration takes about 50ms.

  Subsequent attempts always seem to take longer execution time.

  Only when I restart the calling vi fast for a single file.

  When executing the sub vi alone it is still fast, but I don't see how the main vi (too complex to post here) could hinder the execution of the Sub vi.

  I have no one else to open the file in the main vi, I do not use too much memory...

  Just now I have not now where to look. Does anyone have an idea?

  Concerning

  Florian

  
  

• "seconds remaining" gets kept for a long time for the copy of the files on a key

  I use Windows 7 x 64 SP1.

  When I copy files to any device external storage, initially, it calculates the time... Indicates 3 minutes (or other) remains, and the time gradually boils down to 1 minute, 30 seconds, 15 seconds, etc... When it comes down to 5 seconds, it takes at least 40 seconds for the copy operation to be completed. What is the solution for this?

  It is not a. WIndows 7 is simply bad to estimate the time of copying files. Windows 8 is supposed to be the best.

• I still see "connection" on the tabs when I click on a link. It takes a long time before the page is displayed.

  When I click on a link on most pages, the word "connection" appears on the label, with a small rotating arrow, which remains like this for about 20 seconds.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• A database procedure call takes a long time, but the user is okay with it

  Is there a way to show a progress bar to the user type WITHOUT use javabeans to indicate the State of a process of database? I think that there is a timer to a description, can someone show code example please.
  
  The user is very though will be a process can take up to 10 minutes to run. (this is a batch routine treatment and involves many other procedures, etc. in the database to run)
  
  I am running:
  Forms [32 bit] Version 10.1.2.3.0 (Production)
  Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
  With the options of partitioning and Data Mining
  Oracle Toolkit Version 10.1.2.0.2 (Production)
  PL/SQL Version 10.1.0.5.0 (Production)
  Oracle V10.1.2.3.0 - Production procedure generator
  PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
  Query Oracle 10.1.2.3.0 - Production Designer
  Oracle virtual graphics system Version 10.1.2.0.2 (Production)
  The GUI tools Oracle Utilities Version 10.1.2.0.2 (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle CORE Production 10.1.0.5.0

  Create an element whose width is 100%, changing the Visual properties to show it as a bar.
  Show it on separate with a separate canvas window.
  Create a procedure that:
  -Change the length of your bar:
  SET_ITEM_PROPERTY ('', WIDTH, * 100);
  -Displays the window on the other side
  SHOW_WINDOW ('');
  -hide the window if is greater than or equal to 100
  HIDE_WINDOW ('');

• videos take a long time to buffer

  There are a few dat I could watch fine Inc. and now it will take a long time for the buffer viedo and still have problems

  Hello

  1. what operating system is installed on the computer?

  2. what version of web browser work?

  3. do the same thing happens with all the videos that you try to play?

  4. I think you are referring to the videos online?

  5. How do you try to play the video?

  If you use Internet Explorer and facing problems, watch videos online, then you can check out the link below:

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note:

  There is no option within the operating system to increase the speed of buffering. Only way to increase the speed of buffering in some measure is to have a connection with a higher bandwidth. But note that as does you not an option of continuous play in CD or DVD.

  Another work around that I do personally is to pause the video to complete the buffering and watch the video once the buffering completed.

  I hope this helps!

• desktop computer takes a long time to load after uninstall of netware

  Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

  Hey Reba,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, you have some performance issues on windows XP computer.

   

  Let us try the following steps:

   

  Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

  Run the following fix - it to uninstall client services for Netware.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: See the following article:

   

  How to make a computer faster: 6 ways to speed up your PC:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

   

  Important notes:

  ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

  My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

  All the solutions for this?

  Original title: Windows Vista systems

  Hello

  This can help you:

  "Enable or disable the screen saver.

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

  http://www.Vistax64.com/tutorials/85539-screen-saver.html

  "How to disable or enable Protection by password on Wake Up in Vista"

  http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

  See you soon.

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• Pages take a long time to load in versions 6,7 and 8, version 5 works fine.

  Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• My 3rd generation takes avery long time to load, is this normal?

  My 3rd generation I - pad takes a long time (hours) to load.  Is this normal, or should I consider service?

  Hello

  Make an appointment at apple store for a battery check

  They can offer an out of warranty repair / replacement

  But you have to pay part of the cost.

  See you soon

  Brian

• Can any1 help me why my newly purchased Aspire e5-573 takes a long time to gt began

  Hi all

  I bought a new Acer laptop (Aspire E5 - 573) just 20 days ago, and it takes a long time to start (almost 8-10 minutes), although it works fine once it is started.

  Can someone please help me understand who is there any problem with my laptop, or it's just the way it works.

  I'm not a very irritable kind of guy and first use on laptop (per person).

  Help, please

  Best regards

  Ashish

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to names, email addresses, telephone numbers, serial numbers, etc..]

  Windows 8 and more, it is built in antivirus called Windows defender, it's enough.