Reading text file takes a long time after the first time

Similar Questions

• Reading Blu - ray takes a long time to find videos

  Hello world:

  I looked in the forums to see if anyone has had this problem, but cannot find anything.

  
  I'm a blu - ray player for a feature of creation. Happened along fairly well with only a couple of roadblocks, problems of button highlight, mainly, but that is not why I am here today.

  The last burn takes what seems to be an unusual amount of time to find the video file when a button is pressed. The previous burn reacted pretty quickly.

  I also have a framework of 'snow' before the start of any video (when using my PS3 for playback). No snow by using my Samsung drive, but the videos are always delayed.

  Statistics that can be significant:

  -Burn is 23,92 GB of content. Previous burn was 23.87 Go.

  -J' started the process of creating another 4 on my iMac 2009 finishing using Encore 6 CC a friend using his new iMac.

  -L' use off-brand blu - ray discs, don't remember the name of the manufacturer

  -Reading on my PlayStation 3, which has been fine until this last burn

  Reading finally found the videos and the videos have gone very well. Don't know what the cause of the delay to start each vid.

  Am I pushing it with the size of the content to 23,92 GB? I have retranscoded a couple of files to free space, will see if it works after replacing them, but if you have ideas or it's familiar, please comment. Your help is appreciated!

  Thank you

  Joe Grisaffi

  Houston TX

  Do not use off brand disks use good as Verbatim or Tayo Yuden and burn at half speed.

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• desktop computer takes a long time to load after uninstall of netware

  Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

  Hey Reba,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, you have some performance issues on windows XP computer.

   

  Let us try the following steps:

   

  Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

  Run the following fix - it to uninstall client services for Netware.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: See the following article:

   

  How to make a computer faster: 6 ways to speed up your PC:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

   

  Important notes:

  ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• After that effects 2015.3 takes a long time to open, left after the closing process running

  My AE 2015.3 takes very long time to start. He gets the message "Initializing MediaCore" on the splash screen and then hangs there for 1-3 minutes. It opens also a ton of "Adobe After Effects 2015.3" tasks in the Task Manager, leaving them running even after I quit the program.

  Here is what my task manager looks at this time (no AE running)

  

  So far, what I've done:

  1 uninstalled all Adobe software, including Adobe CC Panel

  2 uninstalled all 3rd party plugins, scripts, and presets

  3. manually deleted all files from adobe - complete cleaning

  4. re-installed AE and some other programs

  (all with reboot between the two).

  No difference.

  Help?

  Apparently, nVidia GeForce drivers are at fault. The break of v368.81 WHQL way Adobe applications communicate with Media Core, make After Effects, first and slow speed Grade, leaving the additional processes in their wake and spoil some plugins 3rd party.

  Returning to a previous driver nVidia solved all the problems.

• Starting the server takes a long time due to the storage of JMS persistence files

  Hello
  
  We use WebLogic 9.2 on a windows machine.
  Recently, we have improved our request to work with JMS.
  We are on 2 different servers in a cluster using 2 JMS servers and works with distributed destinations.
  We use file storage as our persistence store.
  
  Recently, we found boot server takes a long time because of the actions that are performed on the storage of files.
  Analysis of this problem, we have seen that the size of the file is of ~ 2 GB.
  We understand that the file size does not fear (unless it is compacted manually), and its size matches the largest number ever of pending messages in the queues (as a mark of high tide).
  We shot also store debugging, using weblogic. Debug.DebugStoreIOPhysical and we saw a lot of recovery after newspapers file storage is open.
  We have checked and checked our JMS transactions are completed successfully. We also checked that the current messages and number of courses is 0.
  We stopped the server gracefully, check that there are no messages pending.
  However, several times takes start server ~ 30 minutes due to heavy work on the persistence store.
  Compaction or remove storage of files eliminates the delay.
  However, we want to avoid the manual operations whenever we want to start the server.
  
  Please share your ideas.
  
  Thank you
  Itsik

  The only suggestions I have off the top of my head are:

  * Ensure (1) the host system has at least 2 GB (the store file size) memory physics in addition to the memory used by the current process, and (2) the host system is not rebooted between each restart WebLogic. If you ensure that both of these, then the operating system puts implicitly cached content of the file of the store in memory even between boots - when WebLogic starts subsequently storing files, the o/s should be the content of the file much more quickly.

  * You can move to a JDBC store. Runtime JDBC store performance are lower, but since you have generally has only a small amount of records to retrieve, startup performance should be higher in this case.

  * Not that it helps your case, but it happens that we have significant performance improvements of starting process for a future version (if all goes well a near future release).

  Tom

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• Adobe Acrobat Reader update takes a long time

  Lately, whenever I have trying to update Adobe Acrobat Reader on my MacBook Pro, it says "Installing Update" for a very long time (more than 30 min).  Why it takes so long?

  The normal download for installation of Player isn't final setup, this is a download manager to download the actual installer. Especially on Mac OS X, which doesn't seem to work reliable in all cases. I uninstall Adobe Reader and then start with a new download of the full installer via this link: Adobe - Adobe Acrobat Reader DC Distribution

• Still burned DVD takes a long time to load into the reader

  I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

  A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

  (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

  In another Sony player my DVD on average about 25 seconds

  A Panasonic player, it takes about 15 seconds

  In a portable player from JVC, it takes about 8 seconds.

  That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

  Help, please

  Thank you

  EDM

  EDM,

  One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

  Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

  What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

  How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

  As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

  Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

  Good luck

  Hunt

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• Can I read text files in Multisim 11.0?

  I want to take data outside. So, read text file in Multisim 11.0? Or, can I import Chart 11.0 Multisim LabVIEW?

  Hello

  Here is a step by step tutorial:

  The use of LVM in Multisim

  There is something when you configure the file LVM in LabVIEW. In the window to write in the file of the measurement , value X column field, check that you select a column only. Multisim must have this explicit time column when you import data.

  If you still have problems to fix your VI, LVM file and the circuit.

  Kind regards

• Programs to freeze or take a long time to respond

  When I run new programs that they can take a long time to start or they freeze. This happens sporadically, but enough to be a nusiance. I followed all the steps listed under the section "fixit" of Vista Hoem premium and the maintence of the Vista Help sections section: I've defragmented, wipe the drive, run the system performance (overall score of 5.4 due to memory all other 5.9), has increased to 8000 MB swap file and several other steps. If I try to click on the program, while the little circle turns, my screen becomes a pale white and I can't do anythingfor several minutes

  Has anyone else had this problem and solved? I have a lot of space (free 400 G) and 4G of RAM.

  This happens anytime, not only after the machine has been for some time, given the previous answers to this question.

  Daniel Dixon III

  Hi Daniel,.

  What application are you trying to access?

  You can perform the clean boot, and then check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Reference:optimize Windows Vista for better performance

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get rid of the msg "...". is very large and may take a long time to

  Hello
  Simple question:
  How to get rid of msg "...". is very large and might take a long time to load... »
  I tried to increase the number of cells under "App settings-> options-> warn if greater than 5 000 000 000 data form. I even tried to '0 '. Nothing works planning 9.3.1

  Hello

  That's how I've always changed the number of cells, after which display the message on the forms of data.

  There are 2 levels of adjustment. You can configure the application level, but users must select "Use Application Defaults" in the planning of the preferences of the user parameters. To do this, use the file-> Preferences and select schedule.

  Otherwise, you can set the value of the number of cells at the level of the user for ' warn if data form more xxxx ". It should solve the problem. This should be the installation program if you have not selected checkbox default Application for the user in the preferences of planning.

  If nothing else works, it is very difficult to guess, I would open a SR with Oracle.

  Let me know if it helps.

  See you soon
  RS

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com