HP notebook 15 af001au: upgrade HARD drive to hard drive SDD

Similar Questions

• HP 8560p laptop: hp 8560p's caddy drive upgrade hard hot swappable

  Upgrade of removable hard drive Bay is hot swappable so that I can without damaging it remove the optical drive Bay and insert the caddy upgrade hard drive, while the unit is running, i.e. without turning it off.

  It is theoretically but I hesitate. Why do you need to do this? I could check and see if the DVD drive appears in the removable hardware when you click on this icon in the lower right

  

  If it shows up here so you can stop it and I would be sure that it is OK in this case.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ranking upward a disk connector zv6000 notebook to a connector of drive hard ide sata hard

  How up a disk connector zv6000 notebook to a connector of drive hard ide sata hard of ranking

  Cannot be done. The motherboard supports IDE hard disks and there is no place in the Bay for any type of adapter.

• Firebird 802 - upgrade hard drives - Solid State / hybrid anyone?

  I'm upgrading hard drives on my Firebird 802 (the part the WEAKEST of my Firebird and the SMALLEST score on Windows Index). I replaced the drive secondary with a Seagate 500 GB SATA drive at 7200 RPM (ST950042 4AS) and REALLY improved performance (I have my file on the secondary drive).

  It's now time to upgrade the MAIN disk. I'm looking at a "Hybrid" car A Seagate ST95005620AS Momentus XT 500 GB Solid State Hybrid Drive - 500 GB, 7200 RPM, SATA 3 Gb/s.

  Has anyone tried upgrading the main drive of a hybrid? For a solid Sate drive?

  Thank you

  Enzo

  Well WELL, @ 10:39 PM PST after FOUR and a HALF and TWO attempts of the hybrid drive WORKS as my main drive on my Firebird 802!

  Using the data transfer software CMS Bounceback ($14.99 per download) the program was missing several files that were essential for the computer to boot. Once I checked the transfer journal and moved the files myself IT BOOTS!

  THUS, in a few weeks, I'll post the kind of increases in speed that I experience. First comment, my drives are running @ 98 degrees F. It's HOT, so I'll have to come back a fan for the hard disk enclosure, in fact, you can put at the front of the box and jump through this background grid. Going to put in place tomorrow. Now I'm BEAT!

  Thus, it CAN BE DONE on your Firebird! Solution, HERE!

  Thank you!

  

• Activation on upgrade hard drive on a MAC

  Upgrade hard drive on a mac, running windows on the same computer - activation code for windows is no longer valid, cannot run windows cannot get numbers of activation support

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• 6400 upgrade Hard Drive just SHRUNK... Once again!!!

  First of all let me state that I am ready to throw my computer and TWO 2, TWO Yes upgrade hard drives out of my 2nd floor window!

  OK, my wind is done, for now.

  I have an Inspiron 6400 with HDD 80 GB of origin (73.1 GB space.)  I wanted to go to a Western Digital 250 GB hard drive.  I bought the drive and cloned it.  My first attempt was a purchase Norton Ghost program (after the $150 for the reader, that's another $50 for the program) I cloned it from the laptop via a USB - SATA connection.  Everything seemed fine, until I swapped hard drives.  He got through the BIOS, no problem, then started to windows.  Immediately, it projected blue and that was that.  Swap return original hard drive, everything OK.  Put old drive in the spare computer/SATA slot and realized that the reader shrunk to 73.1 GB. . the SAME SIZE as the original drive.

  After days/weeks and literally probably 5 to 6 hours of troubleshooting, downloading about 4-5 programs, utilities, etc, and have EVERY single utility, test and program otherwise tell me the car was very good (less the fact that he was now 170 GB smaller) I thought that drive was simply bad then returned.  (After fighting with Tiger Direct, I had to return it directly to WD, but they at least sent me a replacement unit before that I had to return the first...  (where my 'two' drives))

  So I have the new, 2nd hard drive in hand and I say to myself that I would be the clone differently, from my desktop (Dell 690) who had a few ports SATA spare on it.  I cloned it with a different program and once again, everything seems to be okay.  It showed in my office.  This time, I've set manually the new disk partitions to what I end up with.)

  So I put the new, larger, cloned drive in the computer, booted and BAAM!  Exactly the same thing.  Blue screen stop...  And guess what... The drive is now 73.1 GB. . and once more, there is nothing I can do to bring back to 250 GB... any computer, software, utility, etc. I throw at it or throw it out in...

  Back to Western Digital... but this time, I don't know yet what to say or how to proceed.

  My questions are:

  1. What is happening and why I can't get a 250 GB drive in the machine.  (I can't find ANYWHERE a maximum limit of hard drive)

  2. any thoughts on how to get my drive to the correct size of declaration?

  I'm really steam it... I have never spent so much time on what should be a simple question in my 15 years and more and about 20 + systems of computers through my hands...

  Thanks in advance

  Blake

  Message edited by blakemiller 27/03/2008 17:05
  
  

• Can not activate CS4 Web Premium after the upgrade Hard Drive Mac OS x 11.3

  I can't access any program now CS4 after upgrade my hard drive to an SSD. I get a small dialog box saying "license for this product has stopped working. Error code 150:30"MacBook Pro, OS X 11.3 (el Capitan). The chat tech support person told me that CS4 is "not compatible" with El Capitan, but I've been using Cs4 for several months now with El Capitan, so it's not true.

  In the past, when I've got a new Mac or upgraded the operating system, I had the opportunity in an Adobe dialog to enter my serial number in, but this is not the case now.

  Nothing has changed since this morning except my newly upgraded hard drive. Except that this time I don't have a way to enter my serial number and reactivate.

  Can anyone help?

  Error 150:30 - error "Licensing has stopped working". Mac OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

• Pavilion dv6t-3000 CTO Ente: Pavilion dv6t-3000 CTO Entertainment Notebook PC - RAM upgrade

  Hi all

  Happy new year 2016!

  Need help on RAM upgradation for dv6t-3000 CTO Notebook PC (laptop).

  --------------------------
  My system info:
  Model: HP Pavilion dv6 Notebook PC
  Name of the operating system: Microsoft Windows 10 home
  OS version: 10.0.10586 n/a build 10586
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineIntel ~ 2133 Mhz
  Intel (r) Core i3 CPU M 350 2.27 GHz
  Slot 1: 2 GB Samsung 1067 MHz MEM
  Slot 2: 2 GB Samsung 1067 MHz MEM
  Motherboard: 144 c 65,38

  Virtual memory: Max size: 7 862 MB
  Virtual memory: available: 2 319 MB
  Virtual memory: in use: 5 543 MB

  (bought in 2010 HP online shoppig)
  --------------------------

  I wanted to be the existing 2x2gb RAM upgraded to 2 x 4 GB.
  In the maintenance and the service manual (c02657339.pdf) information, following a very generic info is seen:
  -----
  Two SODIMM slots for customer-accessible/extendable
  DDR3 PC3-10600 1333 MHz memory
  Supports dual channel

  Supports up to 8 GB of memory system in the following configurations:
  Total system memory to 1024 MB (1024 MB x 1)
  Total system memory of 2048 MB (1024 MB x 2, dual-channel)
  Total system memory of 2048 MB (2048 MB x 1)
  Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
  Total system memory of 4096 MB (2048 MB x 2, dual-channel)
  System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
  Total system memory of 8192 MB (4096 MB x 2, dual-channel)
  -----

  Analysis of the essential:
  Maximum memory: 8192MB
  Recommendations of the participle did not «...» PC3-10600... ».

  -----
  I've visited the forums, recommendations are given by competent persons for purchases of RAM.

  Issues related to the:
  1 is my laptop - portable, compatible computer for the upgrade of the Rams the existing 2 x 4 GB 2x2gb?
  2. following has been recommended for a similar case in the forums (for a slightly different configuration):
  
  http://www.Newegg.com/product/product.aspx?item=N82E16820231342

  (1.5V)
  G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ

  (Not sure if is 1, 5V for my machine)
  Can I use the same (2)... or else want to recommend pieces for 2 x 4 GB with the purchase that I don't get no exact corresponding to those. One or the other setting is different.

  Thanks in anticipation,
  Srini

  Your request has been covered in the next more old thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/dv6t-3000-RAM-upgrade/TD-p/2484041/page/2

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• System recovery disks, do not install it on the new drive SDD

  Hello

  I have updated the HARD original SDD disk disk drive.
  First of all, I cloned the old drive and installed the image but then the updates of windows would not work.

  Looking at all the forums and I tried everything I read, but updates still did not work.

  Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but Windows end retsarting continuously after all 3 disks installed.

  He tried to finish the installation but then gets and error and restarts and loops just over and over again.

  Is this something to do with the 4 k sectors?
  Do I need other drivers?
  How can I factory reinstall my Windows 7 disc new SSHD?

  Thank you

  Hello

  > Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but end Windows restarts continuously after all 3 installed drives

  Generally, the Toshiba recovery disks should install Toshiba image on the new HARD drive or disc SSD and the unit should start correctly.

  To be honest, I'm not very well why the laptop keeps restarting after the installation of m.
  But I guess it has something to do with the partitions and sizes of the partitions.

  Is that the Toshiba recovery disks would format the drive HARD (or SSD) and create the same partitions and sizes of the partitions.

  In case the installation of the system would not work by using the recovery discs, I would recommend you trying to install the system by using the Microsoft Windows CD clean. The essential drivers may be downloaded from the Toshiba UE driver page.

• HP 15-d005TU Notebook PC: upgrade HARD drive internal for laptop

  The internal HHD is short on free space and I need to replace it with a larger one. The existing one is 500 GB, SATA and 5400 RPM.

  What should I look for when you buy a new?

  Any internal HARD disk will be suitable and compatible or am I looking for something specific?

  Any internal hard drive 2 TB will be suitable and compatible?

  Since the existing one is using a 5400 RPM, one, can I use one with 7200 RPM? There will be compatibility and or overheating problems?

  Thanks for your reply.

  I don't think not laptop 2 TB drives are made with the rotation speed of 7200 RPM. They are all 5400. 7200 TPM is larger than 1 TB. But, to answer your question directly, you can use any 2.5 inch wide and 7mm or 9.5 mm thick hard drive SATA or SSD on the market. The physical dimensions of each of them are the same, that is the industry standard interchangeable. No compatibility or heating problems.

  http://www.Amazon.com/Seagate-laptop-2-5-inch-internal-ST2000LM003/DP/B00MPWYLHO/ref=sr_1_2?ie=UTF8&QID=1455969492&SR=8-2&keywords=2TB+laptop+hard+drive

  See p. 81 of the manual here:

  Manual

  The access door on the bottom does not contain hard drive. Access to the hard drive takes a broad dismantling so be careful. It will jeopardise any warranty you have left.

  Post back with any more questions as the migration of software/resettlement.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HDX16-1040us | Upgrade hard drive options

  I just bought my HP HDX16-1040us and now I'm wondering what kind of upgrade options are available on hardrives. Here are the questions: - is it possible to use 2 hard drives in my notebook (second slot available?) - I could replace the standard hard drive with a faster? (I'm confused about the specification tecniques. The specifications of the laptop says the following "320 GB - Serial ATA-150 - 5400 RPM". If I take a glance for hard drives faster they talk about SATA II or Serial ATA-300. Can I use a hard disk SATA II or Serial ATA-300?)

  SATA-3 is a new thing. I don't know there is still portable SATA-3. In any case, Yes. All (laptop form factor) 2.5 "SATA-I or SATA-II disk will work. They are all physically interchangeable.

• Satellite Pro A10: Question about upgrade HARD drive

  I want a bigger hard drive, but xp home edition preinstalled. If I change the hard drive I don't think that the recovery disc would work to re install xp. How can I do this without having to buy a new version of windows? Oh, it's a portable satellite pro spa10.

  Sorry, but why you are suggesting that the recovery CD will not recognize the new HARD drive?
  The fact is that if the BIOS will recognize the new HARD drive then you will have no problem for the recovery and the installation of the OS.

  If you want to upgrade the HARD drive, you must use a compatible. Then everything simply initialize-towards the top of the recovery CD and the operating system will install on the new HD disc.

• Satellite P20 upgrade hard drive

  I have a 20 P with 60 GB hard drive, which fills up quickly.
  Can I switch to one of the largest new HD such as

  Toshiba 100 GB MK1032GAX?

  I also guess that my standard would be IDE and I can't use S - Ata?
  The BIOs supports this size of HD?

  Thanks, Birgit (starting the computer)

  Hi, Birgit

  As far as I know just newer models of laptops have 100 GB hard drives. I had last year to P20. Nice unit.

  In my view there should not be any problems but of course try to contact the after-sales Service of Toshiba partner in your country. They have experience with the hardware upgrade.

  Please let us know if the upgrade will be successful.

  Thank you

• Satellite P100-332: Upgrade HARD drive and 4 GB of RAM

  Hello

  I'm new to the forum...
  Well, I want to change 2 things on my Toshiba Satellite P100-332

  1. I have 2 GB of RAM at 533 mhz and I saw on Everest, as well as on the information that I put up. 4 GB RAM 667 mhz. If I want to ask if theres no limitation about to use a special brand of RAM? Or can I use any laptop RAM to 667 mhz? I buy 2 DIMM 2 GB 667, to stay with 4 GB RAM 667 mhz.

  2 - my laptop came with a 4200 RPM ATA hard drive and I want to know if I can change my hard drive to another as one with 7200 RPM SATA as a http://www.pcvonline.com/productDetails.aspx?prodID=7434 and I have not seen yet if the Board supports, but does anyone know if I can put one like this?

  Hello

  (1) the Satellite P100-332 RAM can be upgraded up to 4 GB and you can also use the modules of 667 Mhz because AFAIK the FSB supports 667 MHz also.
  But the fact is that Windows 32-bit (Vista and XP) would see only 3.2 GB due to the limitation of the 32 bit OS.

  (2) the laptop supports the SATA HDD controller and this is why you must use a SATA HDD. But usually it s no matter if the HDD SATA supports the 7200 RPM. In my opinion, you should be able to use these 7200 RPM HARD drive.

  Good bye