HP Officejet 6500 / iPad

I have an iPad and a printer. They can commuicate with others thanks to ePrint and Print Pro.  I'm trying to get the iPad to pick up the printer without these programs.

I went in setings and there is nothing for printer.  It doesn't have a toolbar on top like a MacBook.

What I am doing wrong. I need to break down and call Apple or HP?

Hello

Your printer does not support ePrint (and AirPrint) as shown:

http://support.HP.com/us-en/document/c02814760

So please try the following app:

http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01616126

Kind regards.

Tags: HP Printers

Similar Questions

  • How to print on my hp officejet 6500 wireless from my ipad?

    When I try to print with my ipad via airprinter I get a message "No Printers Found AirPrinter", I have a HP officejet 6500 Wireless, what should I do?

    Hi Gynmom,

    I see that you experience problems printing from your iPad to your printer.  I would like to try the following steps.

    1. unplug the printer and the router for a minute.

    2. turn off your iPad.

    3. connect the router to the top.

    4. wait another minute plug printer upward.

    5 turn on iPad.

    6. try to print again.

    Let me know how it goes.

  • I want to be able to print to my HP Officejet 6500 E709 since my Ipad Air Wireless - I can do?

    I have the HP Officejet 6500 E709 above wireless and a HP G70-460US Notebook PC running on my wireless network.  I would like to print to this printer from my Ipad Air through the wireless network.  I have loaded the HPePrint app on my Ipad and the Ipad sees the printer but when I try to print to this I get the message "no printer found.  I can get it to work or printer is too old?

    Yes. This printer does support AirPrint.

  • How to print from my ipad to the officejet 6500 has more?

    I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

    OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

    BTW - what is the problem with your PC that it cannot access the internet?

  • Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

    Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

    got the HP iprint app but don't have a lot of features except for photography pictures.

    Y at - it info to expand the services?

    Your printer does not support the built-in iPad AirPrint.  You can print with third as HP iPrint printing applications, but you can print is somewhat limited.

  • My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

    I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

    Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

    Of course, it is a pain. How can I solve this problem?

    Thank you very much

    Hello

    It seems that the new router may not support multicast or was not configured correctly.

    Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

    Some routers does not support multicast or maybe this option is disabled by default.

    I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

    Kind regards

    Shlomi

  • support iPad on Officejet 6500 E709n

    The Officejet 6500 E710 supports iPad Air printing.  It's going to be an upgrade for the 6500 E709 who will support the iPad Air prionting Betacam?

    My mistake.  The 709 is not an x, so it will never be able to support AirPrint.  I'm sorry.

  • My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

    After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

    What router?  Reboot the router by pulling its plug momentarily.

    If this does not work, we will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • HP officejet 6500

    After your suggestions with regard to printing a document on my officejet 6500 from my iPad, I downloaded hp design jet apple Store app, now he's looking for a printer email address to connect the printer to the iPad. I can't end of address printer anywhere on my printer. Please advise...

    manishm0602 wrote:
    After your suggestions with regard to printing a document on my officejet 6500 from my iPad, I downloaded the hp design jet apple Store app,.

    Hello

    Looks like you have downloaded a misapplication. Please try the following app:

    https://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

    Kind regards.

  • HP Officejet 6500: hp Officejet 6500

    My iPad telling me it can't find the printer can you please help me with this problem thank you Mike

    Hello

    What is the model/product to your "hp Officejet 6500" (should something E709)? Please check this. How do you connect your printer now?

    Kind regards.

  • HP Officejet 6500 a: HP Officejet 6500 a and Air Print

    I use HP OfficeJet 6500 has connected to my network.  Works very well.  It is also implemented and works with ePrint via email address.

    Now, I'm trying to get my iPad and iPhone to print via Air Print, but they will not find the printer.  All products are up to date.

    (1) is the printer must be in wireless mode for direct connection to Apple products instead of via the router and not through the wired connection?

    (2) it seems that this 6500 a has any ability to woreless when I unplug the ethernet cable, even if the guide and the sites Internet says that she is supposed to have wireless capability.  No Option in the Network Setup menu to enable or disable wireless.

    Hello

    Must be connected to the same network, as long as it's the network of sae, an ethernet cable should work.

    AirPrint is based on good morning, requiring your router to support the transfer of Multicast packets in order to establish such a link.

    There are routers that does not support multicast or can with this support, disabled by default, the router is most likely the cause of forums,

    If please specify your router brand and model to better understand any possible cause.

    Shlomi

  • Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

    Hello

    So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

    I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

    It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

    Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

    Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

    Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

    Hope it is something simple and anyone can help you.

    Thank you

    Steve

    Following this request and reading the many more similar questions, I think I may have solved this.

    I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

    I tried the following in the past two days...

    (1) completely don't reset my router (wiped all settings and started)-no luck!

    (2) I tried changing to WPA2 to just WPA security - no luck!

    (3) tried to convey the Hello to the printer ports - no luck!

    (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

    Finally, what seems to have made (at least for now) has been...

    (1) disconnected the Officejet ethernet and set up as wireless.

    (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

    (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

    By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

    Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

  • OfficeJet 6500 a: Officejet 6500 a will not recognize the network password

    I did a print wireless for years with my Officejet 6500 a and Windows 7.  I have a new computer with Windows 10 and a new router with the new network.  The printer detects the network, but he repeats to me that the password is not valid.  I used the password successfully for my phone and iPad.

    @literaturelover

    Some things to check are:

    If you have not yet done, (re) install the software feature complete for the printer:

  • HP Officejet 6500 a Plus - E710n: error message [OFBBD0]

    In my view, that the OS is Windows x 64. My situation is that I can no longer print from my iPad or phone. I can still print without any problem in my laptop. When I try to my tablet or phone I get the message that it is in contact with the printer (which is normal), then an error message is displayed. Error [OFBBD0]

    Hey @FerFer,

    Welcome to the Forum from HP Support. I hope you enjoy your experience here.

    I understand that you are unable to print from your iOS devices using your HP Officejet 6500 a Plus e-All-in-One - E710n. I want to help you with this.

    What you describe, it seems that you use AirPrint when the error message appears.  With this printer, you have three ways to print from iPhone / iPad. The most common method is called AirPrint. For your information, "AirPrint is a solution of mobile printing included with Apple's iOS v4.2 and later mobile operating systems.

    iPad, iPhone and iPod touch users can print wirelessly on any HP ePrint-enabled printer which is connected to the same local wireless network. Most of the released HP printers in 2010 and later support AirPrint.
  • OfficeJet 6500 E709n does support AirPrint?

    Hello.  Just got an iPad for Christmas - love it!  I also have an Officejet 6500 E709n - dearly loved as well.  I can't 2 working together?

    I'm afraid that the answer is no, because...

    -E709n isn't on Apple's web site as a supported printer (HP Officejet 6500 a Plus e - AiO is tho,)

    and

    -Although the printers and iPad are well connected to my wireless network, if I try to print from my iPad, it says: "No Printers Found.

    But...  Maybe there is a way to upgrade my 6500 to support AirPrint?

    Thx for any info / suggestions!

    No, this isn't and you can not move your printer (reasonably).  The 6500 has new don't (E710), but yours does not support AirPrint.

    However, he manages the HP iPrint - free app on the App Store.  It is more limited than AirPrint, but you can print stuff.

Maybe you are looking for

  • Windows satellite M50 - 10A

    I had the upgrade to win10 on my sandbox, but I read that the M50 - A Satellite will be ready for win10 only after November 15. In the support list is not Satellite M50 - A, so it would be real information.Someone has installed the win10 on the M50 -

  • Toshiba Canvio USB external drive does not work well

    I hope this is the right forum for this questionPlease help me with my external hard drive, Toshiba Canvio usb e05a032bau2xk. It worked fine, but not now.My OS is win xp, sp3, home ed. The Toshiba drive is more steady and is almost impossible to work

  • Satellite L350-170: creating the image of the partition backup system

    New here so first of all, Hello to all. Need some advice if possible please.I just got a new laptop L350-170 with Windows Vista Home Premium.I went thro' the installation process and created with the program toshiba recovery disks but also make the t

  • 2753 error code when you try to install programs

    I have vista and I get an internal error code 2753 whenever I have try and install anything, how can I solve this problem?

  • How can I print just the file names listed in a window of Windows 7?

    How can I print just the file names listed in a window of Windows 7? I found the info in this post... http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/for-Windows-7-can-i-print-a-listing-of-what-is-in/b233cbeb-647d-4E32-ae1f-8523d62b2