HP officejet 6600 problem

Similar Questions

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• HP Officejet 6600, uninstall problem 2081883398

  Hello

  I have a really frustrating problem with my printer HP Officejet 6600. I'm using windows 7, 64 bit.

  All of a sudden the scan function stops working.

  I tried to uninstall the HP Officejet 6600 Basic programs, but when uninstalling this has place of message:

  Error - 2081883398: failed to uninstall the device with serial number: C939DARJIJ05RN.

  If I choose ignore, uninstall the software, but the driver "HP Officejet 6600" are still there, but does not. In addition, this driver are listed in the device 30 Manager - 40 times.  I tried several methods to remove the driver.

  If I ignore this problem to uninstall and reinstall the programs basic HP Officejet 6600, everything is OK until I try to install the wireless printer. The program finds the printer and printers IP address, I mark a press "next". The message "Network Installation missed" takes place. "

  I have installed and uninstalled programs several times, tried to remove the drivers not working not (also in the 7z-cards back), but I have not managed to come around the problem.

  Please - I need help!

  OLHO

  Hi olho.

  This occurs due to malware or other non legitimate software on your PC, please follow the following steps to resolve this problem:

  1. From the control panel > uninstall a program. search for the following keywords:
     Bandoo, IAC, APN, SweetIM, iLivid, Ask Toolbar, SweetIM, Appshat, movies Toolbar and remove any existing result.
  2. Restart your PC and go to the Device Manager, check if these instances can now be uninstalled.
  3. Click the view menu and select Show hidden devices and then continue to search for and remove the printer from the printers / print queues / imaging devices / multifunction adapters / other devices.
  4. type % temp % of the start menu search bar. Open the temp folder, and then open the most recent installation folder that begins with 7z, then open the Utils folder.
     To open the X 86 a 32 bit OS, open the X 64 folder for a 64 bit OS... If you are not sure of your operating system type, follow these steps:
     http://support.HP.com/us-en/document/c03666764
     Run the RemovePreinstalledDrivers file and allow it to reach 100%
  5. Go 2 folders back to the 7z folder and locate the MSI Setup file:
     Research of * x86.msi or * x 64.msi, depanding on your type of operating system.
  6. Right-click on the largest MSI file out of the 2 resutls, then click on repair. If you get a prompt that it is no longer valid for select software installation instead of repair.
  7. Restart your PC.
  8. Open the Officejet 6600 software and follow these steps to reconfigure the device, check for the difference.

  Please let me know if this is useful,

  Shlomi

• OfficeJet 6600 / Officejet 650: roblem recognition new printer when printing to adobe files

  Having a problem with my Officejet 6600 when I try to print a file "adobe". The problem is that the onl print window shows my previous printer that was n Officejet 6500 E709n. I NC does not change this in the print window. I have removed all traces of the Officejet 6500 E709n of my system and have reinstalled the current printer from the disk.

  Any ideas? Need help.

  TallPal1

  Hi @TallPaul1,

  Since you seem to be able to print from other programs, I think that the question has something to do with Adobe. Maybe you will find the following article, I found the site useful adobe: PDF print troubleshoot | Acrobat, Reader.

  If the problem persists, it may be preferable for you to reach the Adobe community.

  Good luck! If there is anything else I can hep you let me know. Please go on the HP Forums!

• Starting with HP Officejet 6600 and cannot change the page size

  Hello

  You have just purchased HP Officejet 6600 all-in-in-one and found that there not a duplexer, which is very very annoying! However, if I can just change the paper size, I can live with the disadvantage to the paper.  I have a Word document that is the flyer for our company, a document A4 which must be printed on A5 paper.  Old Canon printer I could make the A4 as an A5, but now I can't.

  Hope I explained the correct problem and the TIA for help.

  

  In my copy of Word 2007, I am able to evolve in A5 paper.

  Be sure to select A5 in 6600 preferences.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• HP Officejet 6600: Error in HP Officejet 6600 paper

  OfficeJet showing without paper loaded when the tray has a lot of paper in it. Have tried cleaning the rollers, but made no difference.

  Welcome to the HP Forums @hopuldey,

  I came across your post on your Officejet 6600 not detect the paper in the tray and advise you to load paper and wanted to tender hand with my own suggestions.

  Check out the guide below and try the steps in order. If the error persists, contact HP to discuss a replacement.

  Tip: Make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  • An "out of paper" Message appears and the printer is not Pick Up or paper source

  If you have trouble with the steps, let me know and I'll do my best to help.
  
  Click the thumbs below up to say 'Thank you' and 'Accept as Solution' if the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• OfficeJet 6600: officejet 6600 will not be installed

  I have a computer that is running Windows 7 (updated) with a 6600 Officejet attached via the USB port. It worked fine for 3 years, BUT I had to reinstall the printer 7 times in the last 2 weeks. When I turn off the computer at night and turn on the next morning and I begin to print something, I get "no printer installed." It SEEMS to make no difference if I turn the printer off or leave it on when I shut down the computer.

  Any ideas?

  Rusty

  Hi @RustyDHH,

  Thank you for reaching out to the forums! I understand that whenever the computer is restarted, you must reinstall the printer software. I'd love to help you.

  I have provided a few steps to try to see if we can solve this to happen again in the future.

  Here are the steps to completely uninstall the printer from the computer.

  In devices and printers, click once on any icon listed and select the printer at the top of the display server properties, click the driver tab.

  Select the 6600 Officejet then click on delete, the pop up dialog box.

  Select Remove driver and driver package, click OK, click Yes in the confirmation pop up message. (if they are not in the list, it's very well)

  Then in the printers and devices window, right-click and select remove device for Officejet 6600 drivers.

  Unplug the USB cable from the computer.

  Uninstall the printer software.

  Restart the print spooler:

  Click Start, run, type admin in the search programs and files box and then click on the list management tools.
  Double-click Services.
  Right click on print and left spooler, click Properties.
  Click on stop to stop the print spooler.
  Click Start to restart the print spooler.

  Run the Microsoft Fixit Tool: diagnose and automatically repair Windows files and folders problems.

  Reregister Windows install:

  1. Quit all programs.

  2. Click Start, run, type msiexec / unregister in the Open box and click OK.

  3. Click Start, run, type msiexec/regserver in the Open box, and then click OK.

  4. Restart the computer.

  Disable all startup programs and temporarily disable the Antivirus software. There might be something running in the background cause of conflicts. How to use MSCONFIG. Click the Startup tab, and then click Disable all.

  Make sure that you are connected to the computer with Admin rights, and then reinstall the printer using the latest drivers. Here is the link: 6600 Officejet HP e-All-in-One Printer series - H711 full feature software and driver.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.