HP officejet 8500-can I use hp 88 instead of hp 940ink ink cartridges?

Similar Questions

• Can I use ODBC drivers instead of the JDBC driver?

  Hello
  
  Can I use ODBC drivers instead of the JDBC driver? If yes what are working all the steps I have to take the ODBC driver to do?
  
  
  All answers are appreciated.
  
  
  -CHikk

  Hello

  Yes, it is possible.

  Simply create the ODBC connection to your windows and then the link to the topology using the bridge Jdbc-Odbc Driver.

  This help you?

• Can scan is no longer Officejet 8500 a 910 using Macbook Pro 10.6.8

  My software and drivers are up to date.  I tried an excerpt, Capture and print browser.  With the help of the wireless router.

  Thank you.  I already tried this and it did not work.  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Leopard 10.6 I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• HP Officejet Pro 8610: Bought new HP 8610, need to Exchange unused ink cartridges of old 8500 more

  Hi - my Officejet Pro 8500 has more had printing problems so I just replaced it with a new 8610 of Officejet Pro.   Unfortunately, I have 8 ink cartridges 940XL new for the old printer that I can't use (3 black, Cyan/Magenta/yellow 5).  Can you help me with an equivalent amount of cartridges 950XL and 951XL who will work in the new printer 8610 Exchange?

  Hello @JKL1,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to Exchange nine ink cartridges HP 940XL for your defective HP Officejet Pro 8500 has more e-All-in-One Printer for cartridges that will work with your new HP Officejet Pro 8610 e-all-in-one printer. I would like to help you today to this today.

  At this point, I will send you a private Message to the HP ink Exchange program instructions. Can I please have you check your private Messages for instructions.

  I wish you good luck going forward with this. Good day!

• Satego P100-10U - can only use 3 GB instead of 4 GB of RAM

  Hello

  I have a Toshiba Satego P100 Notebook 10U (Modell Nr.: PSPAME - 004002GR) and now I have done an upgrade of RAM of 2 GB of RAM to 4 GB of RAM. My problem is that my Windows 7 64-bit and my 64 bit Ubuntu, do not use the full 4 GB of RAM. The OSs show me that they are 4 GB inside, but he can already use the 3 GB. BIOS has been updated to v. 4.80 and nothing happened.

  Please help me if it is possible in German. My English is not very good see you ;-).

  Thank you

  Björn

  Hey,.

  How much RAM will be recognized from the BIOS? He sees the full capacity of 4 GB?

  Theoretically, it might be possible that some memory is reserved and used for other hardware components like graphics card or something, but if the BIOS detects the whole capacity everything is ok.

• can I use the cd instead of diskette

  Instructions for creating boot diskettes specify 6 floppies. The lap top on that I need to use them to repair my xp installation does not readers. Can I use CD?

  The method to create diskettes is for you can start on the diskettes to perform a new installation of XP - don't not to fix any problems with your system.  A CD ROM XP to continue further.

  You do not floppy drive use to repair your system or solve any problems.

  Depending on how XP has been installed, you can sometimes create a bootable Windows XP CD in the files already on your system.  There are several methods described on the Internet, then it would be a good project.

  You can ALWAYS create a bootable XP Recovery CD of Console and boot your system on this and you don't need any support XP to do.

  What is the problem you are having with your system?

• Can I use photo-noir instead of black?

  Using my Photosmart Premium C410, can I adjust my settings to print on Matt paper strictly using photo black instead of black? I have almost no black/color, but have an abundance of black photo. I do not have an abundance of money, so purchase new black ink is not a good idea.

  Just so that you know, what you have to do to use your PHOTO BLACK instead of BLACK of INK to print (in reason to be perhaps more black ink) is go into the settings of your printer and set it to: impression of the main paper tray, on paper 8 x 11. Click on "print". In this way, your printer thinks it is photo printing - but really, you print on matte paper.

  So the assertion that "you need our product" is false. Another company asking for the purchase of a product not necessarily need

• OfficeJet Pro 6975: 6975 printer Installation stand. Problem installation of ink cartridges.

  Printer is just out of the box.  Installation instructions for the installation of ink cartridges call for lifting of the top cover (with window).  I woke up using inlays of hand on each side.  But the top panel seems to be stuck on the left side.  The right side is free and can be lifted, but not the left.  What Miss me?  Help... Thank you.

  Thanks for the leap here, 8Lives.  I turned off the printer earlier, left for a while, and when I get back, tried again to open the top panel.  He opened.  No idea if market / stop is behind these events, but it's the only thing that has changed.

  I've then turning on the printer with the top panel open in order to focus the ink cartridge sled, and she centered.  So I think that the problem is resolved, although I don't know exactly what's responsible.  In any case, thanks again.  See you soon...

• How to use the HP deskjet 1000 J10a ch340c ink cartridge

  What ink cartridge is used for HP deskjet 1000 J10a model ch340c

  Hi mspearl,

  The number of cartridge for your printer depends on the region in which you are. Please see the table below.

  Thank you very much

  Michaele

  

• OfficeJet 8500 pro wireless using the infrastructure and ad hoc

  I have a desktop computer that I use with a wired ethernet connection and a laptop in which I use a wireless connection.

  I currently have my officejet put in place through the infrastructure on my wireless and usb on my desk.

  My question is if it is possible to use the printer in ad-hoc mode on my desk while keeping my connection wireless infrastructure through my laptop?

  I don't want to go wireless on my desk, but here the convenience to replace my long 15' usb cord with a Wi - Fi connection on the desktop.

  It seems that I can use the printer in ad-hoc mode by default but I don't think I can use ad hoc mode while using my laptop for internet usage. I guess it's either one or the other.

  It seems that the wireless officejet cannot use EITHER an ad-hoc connection at a time given the value or the infrastructure, but not BOTH at the same time that would allow me to use the printer in ad-hoc mode on my desk with my wired connection using the printer with connection infrastructure of my laptop.

  Is there a way to do this? Thank you.

  The printer can connect to a network Ad - hoc or infrastructure. It cannot be connected to both networks at the same time.

  However, if the desktop computer, laptop computer and the printer are connected to the same router; the printer can be installed wireless desktop too (Infrastructure mode).

• When I updated my Adobe Acrobat plug-ins it uninstalled Adobe Reader and installed Adobe Acrobat Reader DC. Can I use Adobe Reader instead?

  I am running Windows 7 Home Premium 64-bit. Firefox said that my plugin Adobe Acrobat was outdated, so I've updated. It uninstalled my Adobe Reader Version 11.0.12.18 and replaced it with Adobe Acrobat Reader Version 2015.008.20082 DC. I did not like this program, and more I read there are still bugs in there. I uninstalled the program and reinstalled Adobe Reader Version 11.0.12.18. I went into the menu of options of Firefox under applications and changed the options Adobe to use Adobe Reader as the default application for PDF files. It is a safe choice, or should I leave Firefox dictate what PDF program I use? I am concerned about safety issues. Any opinions?

  I think that your question has been answered mainly in this thread: https://support.mozilla.org/questions/1079182

  In my opinion, you can trust Adobe to keep the series XI Reader updated for awhile. It is completely safe is impossible to know, given that vulnerabilities are often discovered and kept secret.

• How can I use HP 2605DN printer black when color toner cartridges are empty?

  Is there a way I can use my 2605DN strictly as a printer laser black when all or part of the color toner cartridges are empty?  I like the quality of the HP 2605DN and works 99% of my black print.  Thanks for your help.  John O.

  You must change the option replace supplies of "stop out" to "ignore the.

  Go to the printer and use the buttons to select as follows:

  the system configuration->-> supplies to replace print quality

  Change to "stop out" to "ignore the.

• Can I use original PC3200 instead of PC2100 memory in my Pavilion ZT3000?

  I get errors of memory on the original 512 MB of memory (2-256 MB PC2100 DDR modules) in a Pavilion ZT3000.  I can buy PC3200 modules for half the cost of the PC2100 modules slower.  Does anyone know if there could be problems using this faster memory in the zt3000?

  Also, I saw some info on the Internet about some problems of compatibility with the Centrino processor (which uses of the zt3000).  Does anyone know the scoop on this?

  Cdaddy

  PC 3200 memory should be down clock to PC2100 without too much problem.

• Expdp/impdp can be used to upgrade the database (instead of DBUA) R12

  Hi all
  
  (1) could as possible to convert the database to UTF8 value as part of the database
  upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?
  
  (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
  with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
  Can I use expdp/impdp instead so I can convert the character at a time? All documentation
  that I can follow to use expdp/impdp to do the upgrade?
  
  (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
  the value UTF8?
  
  Thanks in advance!

  (1) could as possible to convert the database to UTF8 value as part of the database
  upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?

  I do not. You must upgrade, and then convert the characters or convert then upgrade - you can save an SR to confirm this with the support of the Oracle.

  (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
  with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
  Can I use expdp/impdp instead so I can convert the character at a time? All documentation
  that I can follow to use expdp/impdp to do the upgrade?

  Only DBUA is the way supported in Oracle EBS instance level. Please see this similar thread - Oracle EBS 11i Database Upgrade to 11 GR 2 - Upgrade method Support Manual is?

  (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
  the value UTF8?

  Please see the documentation referenced in this thread - ADADMIN convert character set CUSTOM_TOP

  Thank you
  Hussein

• Y at - it a region code for the Officejet HP ink cartridges?

  I plan a trip in North America and would like to take my printer HP Officejet 5610 AIO. I would like to know if the ink cartridges purchased it will work on my printer bought in Singapore.

  Thank you.

  Singapore and the United States, the Canada and the Mexico are all in Zone 1 of the four areas in the strategy of regionalisation of HP, so he would not have a problem.  See the table at the bottom of this page for registration for other countries.