HP Pavilion dv6 B8N04PA #ACJ: update the configuration of failure. Restoration of the changes

Whenever the laptop to install the update. Then when you restart it will read the updates of configuration failure. Restoration of the changes.

This continues until 30 minutes before it finally restarts

Hi @mayurz91 ,

Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dv6-7040tx laptop and with updates.

Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

If you run an antivirus protection, this could be a problem. Disable temporarily to perform the required updates.

Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

I hope this helps.

Thank you.

Tags: Notebooks

Similar Questions

  • Pavilion DV6 entertainment: software update the Pavilion DV6

    Madam/Sir.

    I own a hp Pavilion DV6 of Entertaiment, serial number; (Deleted content), product number; A7Q11EA, originally installed Windows 7 Home Premium, I decided to upgade Windows 10, strongly recommended by windows, but after a while the machine stopped working proply, sending a lot of warnings. I decided to go back to the original software installed but the phone asked a cd for a correct installation, of course, not having, that I found a copy of win7 Premium in which I installed in the hope of reaching to. I then reseached the net and discovered that a lot of windows, consumers have the same problem, at this point I don't know what to do could you please give me some advice on dealing with this problem? could hp provide me a copy of windows 7? If it would be useful if I could send the number of key windows installed originally on pc...

    I will be available at any time.

    Best regards

    Guido

    Hi @guido651,

    Welcome to the HP Forums!

    It's a great place to find answers and information.

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    I understand that after upgrade to Windows 10 of Windows 7 that you had problems with the laptop.  You tried to return to your original operating system, but was invited to the disc that you did not.  Then, you used a Windows 7 disc to reinstall the operating system.

    If you do not format the drive and remove the recovery partition, you can use it to perform a recovery to factory.  If you format the disk and the partition has been deleted and you need to contact HP support to acquire a laptop HP recovery kit.

    Here is a link to help you try the recovery.

    HP computers - performing a recovery of system HP (Windows 7)

    During the recovery process, there will be an option to backup your data to prevent loss, if you don't the have not made one and I would like now is the time.

    HP and Compaq Desktop PCs - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

    If you need to get the recovery kit, please contact HP to Contact HP Supportassistance.

    To say thanks for the reply please click thumbs up button below.

    If this Treaty your concern please choose the solution provided to help other posters.

    Good luck!

  • Pavilion dv6: how to bypass the disable password & systems admin

    pls help to find the code to unlock the bios.

    define oner year bios password and forgot it.

    HP Pavilion DV6 model

    After the third time going wrong get error: "the system disabled key: 64680447.

    pls help

    Kind regards

    Alexey

    Hello

    1. just to be sure, check the stop code (64680447) is correct.

    2. If the stop code is correct, stop the laptop, remove the hard drive from start and try entering the code again, preferably through an external keyboard.

    Kind regards

    DP - K

  • Pavilion dv6-6b54sl: ID of the laptop failure

    Hello, I have a laptop HP Pavilion dv6-6b54sl, product number: A6P10EA #ABZ.   OS = Windows 7 64 bit.

    My question is: laptop stops working, more than 1 time. Reboot the system, then it seems normal.

    I just restored original configuration. But not resolved.

    So I did the HP diagnostic test: test running and break-in failed.

    Starting test report:

    Memory test passed; =

    Smart check = passed;

    Short-DST = failure;

    Failure ID = mc0c6w-5rt7g2-qfph4k-60xh03

    Could someone explain to me?

    Hello

    Yes, hard drives, I linked in my previous post works perfectly - you are not limited in any way that the manufacturer of the drive.

    Kind regards

    DP - K

  • HP Pavilion dv6 QG478PA #ACJ: noisy fan & heating

    my laptop fan clocked to break speed with noise and also heating. I updated the BIOS of the processor etc. and also HP feel cool, adjusting the start-up etc but not effective so far. Especially when I Browse (Chrome, Firefox, Opera) internet also update flash plyer.etc

    Help, please

    Hello @Arijit_T,

    Welcome to the HP Forums!

    I read your message and understand that your HP Pavilion dv6-6155tx fan is noisy and hot running. I'm happy to help you with this problem. First of all, please perform a reset. Once this is done, please follow the steps described in these documents:

    1 computers laptops HP - Fan is Noisy and runs constantly, PC is hotter than normal

    2. HP Notebook PC - reduce the heat inside the PC to avoid overheating

    3 HP computers - solve slow down the performance of the system (Windows 7)

    If documents do not help you resolve the problem, try to restore the BIOS , then check the updates of Windows.

    Thanks, I look forward to your response with the result.

    If this post helped you, show your appreciation by selecting the thumbs up!

  • HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

    Hi all

    My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

    summer giving a helping hand by making the upgrade.

    Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

    processor, it seemed to be good upgrade to improve the performance of the laptop.

    We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

    ( interview guide , page 108), and the seller assured us he tested the CPU on some different

    HP pavilion and it worked fine.

    But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

    on the front and the setting of the power and volume buttons would light up periodically. The screen was black

    All the time.

    Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

    and it starts fine.

    I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

    same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

    I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

    missed, or the problem elsewhere?

    Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

    on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

    Any help, advice or general guidelines as to what should be done would be really appreciated.

    Thank you for your attention.

    Hello:

    The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

    In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

  • Pavilion dv6-6c14nr: launch of the browser and redirecting on several occasions

    For the last two days, I had a problem frustrating with my browser/computer - the browser will be repeated launch or redirect to the home page.  To be more precise, if the focus is on an active browser window (in other words, if this is the app that I use or this is the last application, I clicked on), the browser will redirect to the home screen.  If, however, the emphasis is on another application, a new browser window will be launched.  This problem occurs regardless of the browser that I use (and when a new browser window opens, it is my default browser, Chrome, and it opens to my home page, a new empty tab).  When I was working in Visual Studio, it opens the browser which belongs to VS, then repeatedly redirected to the home page by default for this browser. The frequency with which this happens varies, once every few minutes, at most of the time (more than once per second) - I got 40 + windows browser in less than a few minutes. I removed all of the Add-Ins and Extensions, under the assumption that one of them could be the cause of the problem - no luck.

    I read similar messages on the HP Board by people who appear to have been able to solve this problem, despite the attempt of everything, including the relocation of the browsers and even reformat the hard disk!  Someone suggested that fixing file hosts worked for her, but I checked my and it seems to be as it should.

    In fact, I wonder if this could be a hardware problem any. Seems not intuitive for me, of course, but here's the thing... a few days previously, when booting, I saw some kind of error about my fan works not properly.  I installed Speccy (by Piriform) to monitor the conditions of my system and noticed that my computer has been running hot from time to time. So, I know this sounds nuts, but I put an ice pack under my laptop (well, two trays full of ice in an oversized Ziplock bag) and the problem seems to have slowed down a bit.  Also, I noticed that this problem seems quite widespread on HP Pavilion machines.

    Is it possible to fix this? Or will I stuck buying a new laptop? Although laptops are really cheap now, I really can't afford it. I suspect that the replacement of the fan would cost almost as much as a new laptop. But I can't work on it like that! Any ideas or suggestions?

    Thank you!

    Traci

    Hello and thanks for your advice and comments.  After reviewing the comments posted to some old messages to people with similar problems, I think I understand the problem, but also a solution in the short term...

    Apparently a fan problem is originally the computer overheats a little, and the heat is initially somehow the computer thinks that the shortcut for 'WWW-Home' is pressed several times (not sure of the mechanics behind this, but the shortcut implies the F5 key, which is located in one of the hottest areas of the computer).  The warmer the computer becomes, is more frequently as she considers the shortcut key display press and more frequently a new browser is launched.  So, a quick solution to the problem - disable the shortcut key (by editing the registry or by using a software like KeyTweak - the code for the key is 144, btw). Of course, I'll replace my fan in the next few days (I have a bag of ice below pending), but it's nice to have the use of my computer until there!

    Based on the other posts, I've read, this problem seems quite common for my laptop model - a HP Pavilion dv6 - 6 c 14nr.  Most of the messages I read involved HP pavilions, and many of them were a HP Pavilion dv6 or similar.  Others with the same problem seem to have experienced worsening much more that what I have - many of them actually reformat the hard drive when nothing else worked - and if this still does not solve the problem for them, they got rid of their HP laptop. Perhaps HP can save this information as a 'known problem' and view the Guide somewhere for support staff and users to easily find?

    Thanks again!

    Traci

  • Pavilion dv6-3151sf: Identification of the material ACPI\VEN_HPQ & DEV_0004 driver not found

    ACPI\VEN_HPQ & DEV_0004 driver not found pavillondv6-3151sf

    ACPI\VEN_HPQ & DEV_0004 can not find the driver for this.  HP pavilion dv6-3151sf

    Hello:

    You need this version of the driver ProtectSmart...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & productOid = 5273697 & sw_lang =

  • Pavilion dv6: looking to upgrade the processor in my laptop

    I was looking to upgrade my current CPU to an i7 which would be compatible with my motherboard are there?

    CENTRAL PROCESSING UNIT

    Intel Core i5 2450 M @ 2.50 GHz

    RAM
    16.0 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)

    Motherboard
    Hewlett-Packard 17FC (CPU1)

    Graphics
    Monitor generic PnP (1366x768@60Hz)
    Intel HD Graphics 3000 (HP)

    Hello

    Your laptop's card with Intel Dual core with UMA graphics card and the USB 3.0 version.

    The high processor upgrade possible, without changing the Board of Directors is 2640M i7 dual core (HP 666173-001 part number). Not much of a performance gain.

    If you want to upgrade to QuadCore i7 (i7 quad core 2860QM), you have to replace the Board of Directors. It'll be better buying a new laptop with the better than going to this costly upgrade card.

    Manual - Page 25-27: http://h10032.www1.hp.com/ctg/Manual/c03099531

    Source: http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5191856/model/5218555/manuals

    Data sheet: http://support.hp.com/us-en/document/c03127146

    Concerning

    Visruth

  • Pavilion DV6 3225dx: HP Pavilion DV6 gets slower on the withdrawal of the charger

    I have HP Pavilion DV6 3225dx. Every time I remove the laptop charger becomes slow and when I plug the new charger is fast. I have erased all only dust in the laptop, but it's always the same. What should I do?

    Hello:

    Unless you have already changed the power "on battery" mode, there are different eating patterns when the laptop is plugged in, and when he's alone on the farm.

    See this link for more information and where you can change some settings (for example the maximum processor state, etc.).

    http://blog.LapTopMag.com/Windows-Advanced-Power-Options-explained

  • HP Pavilion DV6-2106EA hangs after the insertion of son wired CAT5 (internet)

    HP Pavilion DV6-2106EA hangs after when inserting the cable wires CAT5 for wifi internet works fine

    or wireless works fine. Need help

    Hello

    Unplug your ethernet category 5 cable.

    Download the LAN driver from the link below and save it to your desktop.

    FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46504.exe

    Then, in the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.
     
    sfc/scannow               (Note that there is a space between sfc and /)
     
    Let the entire process, then the output type and press ENTER.

    Now, right click on the installer you downloaded and select "Run as Administrator" to launch the installation.  When finished, restart the computer and try to connect the cable again.

    Kind regards

    DP - K

  • HP Pavilion DV6-2090er CPU update

    Hello!

    Could you help me, please? I could change the CPU on my laptop HP Pavilion DV6-2090er for the best? What does not work on my PC?

    Hello:

    Yes, you can, but I don't think it would be worth the expense or effort to do so.

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c01860375.PDF

    We'll find taken processors supported in Chapter 1, page 1.

    You can upgrade to the processor i7-820-QM, 1.73 GHz.

    Paul

  • Pavilion dv6 - how to clean the fan

    HP Pavilion dv6-7029wm

    He did two years since I bought the laptop, and I finally realized that I have to open the computer to clean the fan properly. However, my laptop doesn't have access to the cooling fan Panel - so I tried to take it apart with the help of the manual.

    However, the procedure necessary to reach the fan itself is very long and complicated, as seen here:

    http://h10032.www1.HP.com/CTG/manual/c03582006.PDF

    Is there another way easier to reach the fan? I have to go through this everytime I want to clean the fan?

    Also, I am stuck at the part where the keyboard should be removed. The keyboard is supposed to be difficult to remove? Because when I try to remove it, it seems as if she can bend and break.

    I wish I could post pictures...

    Hello:

    I never take a laptop apart to clean the fan.

    Here's what I do...

    Disconnect the power adapter and remove the battery.

    Find a thin object such as a straight pin in place through the air intake fan and make sure it happens between two of the fan blades to avoid the fan turns.

    Get one of these cans of compressed air to dust and spray it in the fan intake and exhaust fan a few times, I look for dust to move on the vents.

    When I see more dust blowing, I consider the work completed.

    Reconnect the battery and a/c adapter.

  • HP Pavilion dv6 6080 ep: update of HP Pavilion dv6 6080 ep memory

    Hello

    I own a HP Pavilion dv6 6080ep. It came with 4 GB of RAM and it has an intel processor i5. In order to do an upgrade of RAM I get Manual HP on memory full capacity. It is said that for this model, with the i5 processor it could go up to 16 GB of memory. When I searched for the spare part of HP, he said that both the 621569-001, the 4 GB and the 634091-001, for the 8 GB, should be replaced by 641369-001 and 670034-001. Let me stress to you that these replacements have slightly different form of the original. I searched among the brands of memory there, specifically Kingston and crucial that said for this model I can get 8GB in mind. I think sincerely lost now. The amount of memory can my laptop really gets and there is no record of RAM I should know about off?

    Thanks in advance,
    Paulo

    PS: I was planning on getting a tp of Kingston KVR1333D3S9 / 8G add to my original 4 GB. (for a total of 12 GB)

    This is max 16 GB of DDR3 - 1333 PC3 - 10600 SO-DIMM aka. DDR3-1600 will downclock at 1333, and that's what you're probably see. I'd get 2 identical modules and not mix and match old and more recent memory. You prefer the modules with 8 blocks of black memory on each side (low density) as the HPs like the better guy.

    This works, for example:

    http://www.Amazon.com/G-skill-204-pin-so-DIMM-laptop-F3-1600C11D-16GSL/DP/B00HHDUEDG/ref=sr_1_14?ie=UTF8&QID=1427144332&SR=8-14&keywords=DDR3-1600+so-DIMM

    Even though it says 1.35 volts it will work also to 1.5 volts if necessary. memory of 1.35 volts is a better product because they choose only the best RAM for low voltage memory chips.

    Manual

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion DV6-6B26US completely crashed the month after warranty

    The month after my warranty was up (January 2013) my laptop started getting blue screens that would freeze the laptop.  He has never published a journal of the accident.  I ran the recovery disk and restored to factory condition.  He worked for a few weeks then happens again.  I've tried everything.  Test drive are good after restoring to factory State, but after a blue screen, I can no longer run test.  I have restored at least 4 times.  Now my laptop is not working even in safe mode, and it will not work the recovery.  I read to try to install windows 7 from a windows disk, but that will not work without the driver for the hard disk, that I can't go anywhere.  With all the problems that I have just read on this laptop, why HP does not solve this or making it right?  I have a Toshiba laptop which has worked for 7 years. (touch wood)

    Anyway, if someone has a miracle in difficulty who does not buy a new one or pay for technical repairs, please let me know.

    Here's my info:

    HP Pavilion dv6-6b26us

    Windows 7

    Buy Jan 2012

    Seagate hard drive / model ST9750420AS / pilot was 6.1.7600.16385 / firmware 0003HPMi / series[personal information deleted]

    Thank you

    I had to replace the hard drive for this problem.

    Thanks for trying to help.

Maybe you are looking for

  • CVI executable causes an on update of Windows 10 anniversary 0xC0000005 Access Violation.

    Created executables always causes an Access Violation (0xc0000005 exception) to the closing period on Windows 10 RS1 (update of the anniversary). This problem occurs in LabWindows CVI 2015 and 2015 SP1. How to reproduce: simple program to create and

  • Functions of mixture for three simple trapezoidal profiles

    I'm trying to learn how to use the functions OR Motion Assistant, LabVIEW to create my own profiles, but I fight to get mix to work. In the attached VI, I take three simple trapezoidal profiles and try to mix them. The code is based on the example pr

  • Some basic questions on TestStand

    Hello I'm new on the test stand and I just finished my first sequence. I have some questions on how to do better. My sequence steps about 100 it is running. One of the steps that happen quite frequently is a break so that the previous output VI can t

  • Maximum number of EA4500 of port

    Hi all Background: currently have a WRT320N, think about upgrading to an EA4500, assuming a feature has been improved: Port Forwarding. Script: Currently, I have a router WRT320N, and while he "does everything we need" it presents a restriction that

  • wrt54 v.6

    I have a wifi router wrt54 and I was running through the Setup program on the cd but after that that it configures the settings of my computer and jumped to the top of the password box already filled. If you connect to this topic will be just configu