HP Pavilion g6-1371sa cannot connect wireless Internet

Similar Questions

• My HP Pavilion dv9720Ous laptop cannot connect to internet

  I installed a new Buffalo-G-CBOA router for home. My HP Pavilion dv9720Ous laptop connects to the router, but the HP laptop cannot connect to internet. Is there something that needs happeon on the PC to connect to the internet? Thank you

  How are you communicating on this forum?

  I suppose that from another PC, correct?

  Download you the driver on the PC that you are using, and you glitches the file on a CD, or copy on a USB key.

  You transfer the driver file that you copied to a flash drive or a CD into the computer that needs the update of the driver, then run.

• Satellite L300D - cannot connect wireless Internet

  I just bought a Toshiba Satellite L300D-202 and can, t connect to wireless internet. When I try to connect it only gives me not a wireless option, I only get cable or dial options. We have not seen all the wireless devices.

  When we passed by Toshiba assist/connect/conective doctor and pressed the radar message was peripheral wireless network is disabled please turn on the device.
  The wireless switch is active, the light is orange.
  Our other laptop is fine.

  Can you help me?

  Thanks for this info!

• Pavilion p7-1222: cannot connect to internet using stock card Broadcom WLAN

  I have a p7-1222, which has been recently updated to Win10 64 bit. Since the upgrade, I've known little or no connectivity using 46.0.1 Firefox or Internet Explorer v 11.0.31 so you use ipconfig, I can ping my router and receive a very quick response. I have the Broadcom WLAN stock adapt with an era of 2010 driver who seems to be the current driver when I do an update. Is there a more Win10 driver for this card? Do I need a newer adapter which is compatible with Win10? What can I do to connect to the internet with a certain type of regularity? Thanks for your suggestions!

  Hello:

  If your PC has network Broadcom 4313 wireless adapter, I believe that this does not work so well (if at all) with W10.

  The only suggestion I can offer would be to see if the W8.1 driver provides an improvement.

  This package contains the Broadcom wireless LAN drivers that are required to activate the integrated Broadcom Wireless LAN Adapter into laptop computers supported running a supported operating system.

  6.30.223.267 Rev.A (September 17, 2015)

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72931.exe

  If this does not work, the best thing to do would be to get an external usb wireless network card.

  I use it on my 3 HP of the PC business office.  Works very well on the W10.

  http://www.Amazon.com/Linksys-dual-band-Wireless-N-adapter-AE3000/DP/B007ZLGXA8

• My computer cannot connect wirelessly.

  I accidentally downloaded a windows vista edition family basic model of office on my laptop

  Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

  Dear, Mizzy2Fy4U

  Hello

   
  1. from which site you downloaded Windows vista home edition?
  2. what operating system is already installed on the computer?
  3. What is the exact error message about hardware and the floppy?
   
  You can also perform the resolution of the problems of Internet connection and check:
  See the link provided:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• A Wi - Fi connection does not have an IP address and cannot connect to Internet

  Here's my question:

  "Wi - Fi doesn't have an IP address and cannot connect to Internet"

  But he connects.  I use the model of airport Time Capsule ME182LL/A and the last OS.

  The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.

  Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'?  It doesn't have a green dot next to the Wi - Fi connection and it says connected.  I'm puzzled.

  Thanks for any idea that you can provide.

  Something wrong with the Setup program.

  After the airport utility screenshots of the configuration of TC.

  In particular this modem do you have? Actual spending brand and model please.

  Who is your ISP?

• Tecra M1 cannot connect wireless

  Hello

  This new but I hope someone can help me.

  I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

  I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
  I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

  Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
  No problem connecting via a direct cable.

  Thank you

  Hello

  have you tried to connect with another machine to check if it works?
  Otherwise, I suggest the following things:

  -Disable all security features
  -update the firmware on your router
  -dhcp instead of IP´s sets the value
  -read the manual of the router, sometimes they have weird parameters

  and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

  Welcome them

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• Adobe cannot connect to Internet

  Adobe cannot connect to Internet, but Internet works well. I have Adobe CS6 Master Collection for Windows.  I tried everything... ALL without any result. Please help me.

  Please see:

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  'Please connect to the Internet to continue' error keeps popping up.

  Error: "could not connect to the server.

  I hope this helps.

  Concerning

  Megha Rawat

• Win 7 cannot connect to internet, found wireless & LAN network but cannot access the internet.

  I've updated my laptop lenovo Y430 to Windows 7 Home Premium about 6 months ago, it has been working fine until last week, I just can't connect to the internet more. I used to use a wireless network, now it says that it is connected to the network, but 'no internet access', while the signal says it's just. I also try to always use the Wired internet, not luck, and worse yet, he says no 'identified Network/No access to the Internet.

  "I have troubleshooted, that is the message he gave me: 'Connection to the Local network' is not a valid IP Configuration.

  I run 'ipconfig' cmd and this is what gives me:

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e99e:3f78:35 c 3:7056 %11
  Autoconfiguration IPv4 address. . : 169.254.112.86
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  and I've run ' ipconfig/all', that's what I got:

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: salt - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-16-EA-DC-69-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1E-EC-96-77-04
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e99e:3f78:35c3:7056% 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.112.86 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 234888940
  DHCPv6 DUID customer...: 00-01-00-01-10-38-1C-FD-00-1E-EC-61-19-2C

  DNS servers...: 85.255.112.123
  85.255.112.234
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Please answer asap, HELP!

  Thank you.

  Sincerely,

  Evan

  

  Yes.

  Routers and switches are different types of network devices.  Routers are "smart".  Switches direct network traffic between computers on a single network, while routers can act as the interface between two networks (for example, the Internet and your Local network). There are many explanatory pages on the Internet about it. Here'sa .

  Actually, most "routers" sold for home use today incorporate both a switch and a router (and in the case of "wireless routers" also incorporate a wireless access point). Routers include usually a (NAT ) network address translator, also a DHCP Dynamic Host Configuration Protocol (), a proxy of domain name Service (DNS) server, and a hardware firewall to protect the local network from malicious intrusion on the Internet.

  Your provider of Internet service through your cable modem, "sees" the WAN port of the router, as a computer (which is) generally configured to automatically obtain its IP address.  The ISP's DHCP server assigns this port the only IP address that is allowed to you.  It is an 'external' or 'public' IP address, and this is the address that other computers elsewhere on the Internet use when they drive traffic to you.

  The router's built-in DHCP server assigns 'private' IP addresses for each of the computers connected to TI (no matter if they are connected by wire or wireless).  As a general rule, these are of the form 192.168.1.x or 192.168.0.x, where x goes from 1 to 254.  These IP addresses are not 'seen' by computers on the Internet.  Instead, the feature NAT on the router directs traffic to your public IP address to the correct of your internal computers (and vice versa).

  A switch can't do it all.  If your authorized service provider, you can connect to your switch directly to your modem and the ISP's DHCP server assign an IP address publicseparate to each computer connected to the switch.  Because your ISP does not allow more than one public IP address from your account, its DHCP server assigns such address to the first computer he sees connected to the switch.  If several computers are then connected to the switch, the ISP's DHCP server simply ignores them: too bad, computer #2, you do not get an address, and so you can't connect to the Internet.

• my laptop cannot connect wirelessly to the internet with the built-in wireless adapter

  G50-118NR my client specification identifies my network home qwest DSL WPA2 as public wireless whenever I connect wireless using the Atheros AR5007 802 wireless network adapter. 11 b / g WiFi and does not connect to the internet.  I can change the Private type, but it does not help.  I have restored the laptop using Vista Home Prem 32-bit recovery CD and that did not help.   The wired connection works perfectly and other 'g' and 'n' USB wireless adapters also work very well.

  Hello:

  Please read my post on the link below for the Atheros cards and newer routers, and see if you install the latest Atheros driver I posted on it works for you.

  http://h30434.www3.HP.com/T5/wireless-Internet-home/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

  Paul

• Cannot connect Bluray Internet

  Shows the signal from the router but cannot connect

  Hello Ellen,.

  Welcome to the community of Sony.

  Check in the manual of the player, if the LAN USB UWA-BR100 card is needed to connect the player to the wireless network.

  You can download the manual here.

  Test the speed of the Internet being used from the link below.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1013044

  Internet connection speed minimum of 2.5 Mbps or greater is required for streaming of videos from standard definition (SD) and 10 Mbps or higher is required for high definition (HD) videos.

  Follow the steps mentioned below to resolve this issue.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1018338

  If the problem persists, perform the steps on the below knowledge base article to configure the network manually.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1025439

  If my post answered your question, please mark it as an "accepted Solution".

• Printer cannot connect to Internet

  I need a claim code. To achieve this, I need to access ePrint of my Control Panel on my printer HP model 3512. Unfortunately, I like "Printer cannot connect to the Internet." Can someone help me understand this and correct the problem? Thanks in advance... M

  You don't need a code of request to connect to the internet. Your printer has wifi support? Connect the printer to your router wireless first, then you can access ePrint.

• Cannot connect to internet after upgrading to windows xp professional version 2002 service pack 1.

  Hello

  My labtop is hp nc6000. I have upgraded to windows xp professional version 2002 service pack 1 and I can't connect to the internet.

  I used another computer desktop to download service pack 2 and 3, but still cannot install these due to no internet connection.

  I also tried to upgrade the drivers of hp nc6000 obtained from another computer, but received a message that the package cannot be decompressed - another copy must be obtained.

  Please help with kindness.

  Thank you.

  Are you trying to connect wireless or ethernet cable? Have you checked your connections are enabled? If you use the wireless option, you use the hp or windows connection manager?

  I sugest you try to connect with an ethernet cable and go to the network connection in Control Panel and check if your local connection is enabled. If you connect through a router has the DHCP settings.

  If you use the wireless you will need to enter the connection as a new SSID and key details