HP Pavilion g6: need code bios crack please help

Similar Questions

• I need to unlock compaq mini code is CNU027599F, please help

  I need to unlock compaq mini code is CNU027599F, please help

  Try to ashes.

  e9l17xqoo8

  3rd letter tiny L.

  4th is number 1.

  7th letter lowercase Q.

  8th and 9th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• I forgot my bios password please help when 3 times hit the code 99470161.

  I forgot my bios password please help when 3 times hit the code 99470161.

  Thank you

  Hello

  Enter: 26558167

  Kind regards

  DP - K

• try to install vista keep an error 0xc0000135 msoobe.exe code get it please help

  tried loading the bios, upgrade please help

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine. Or support of incorrect installation, for example by trying to use an OEM brand (HP, Dell, etc.) of the disc in a different brand or generic computer.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty.
  MS - MVP - Elephant Boy computers - don't panic!

• CODE ERROR CNU9102B6Z please help

  password bios HP mini 1000?   CODE ERROR CNU9102B6Z please help

  Hello

  Try to enter: e9lo317pg0 (to be noted that the 3rd character is a lowercase L and the last is equal to zero)

  Kind regards

  DP - K

• HP G62 Bios 52991539 please help administrator password system

  HP G62 Bios 52991539 please help administrator password system

  @mal6

  Enter 43699519

  Kind regards

  DP - K

• put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  If you have xp, you can do system restore

• Hi there I need help with my laptop my code is 55385917 please help

  • Hi there, I need help wit my computer hp pavilion laptop it starts just to show enter them administration or turn on password after 3 times the disable password are 55385917 Please HELP ME because THAT ALL MY WORK IS IT ON please

  Groove

  Try: 40083339

  Concerning

  Visruth

• HP 14-b017cl: Bios locked, please help

  BIOS is locked on hp 14-b017cl, its projection code is [51389507]. Help, please

  Hello

  Enter: 44081529

  Kind regards

  DP - K

• HP Pavilion dv6-2190us Mediasmart Menu gone please help

  as indicated in the title menu mediasmart has essentially disappeared. Let me explain... before I updated the individual programs that were not on the menu... after that I've updated them disappear them icons in the menu mediasmart... this file, if any I need to change to get the icons on the menu... I can open individual programs via start, then programs, but I would like to put them on the menu... Please help

  Woo hoo, I have it set... Here's what I did...

  I first tried various updates smartmenu that they did not work...

  then I reinstalled my original smartmenu via the recovery media (without repeating any system... just the smartmenu)

  Then I found the location for the "buttons" or icons that appear on the smartmenu... they are located in C:\Program Hewlett - Packard HP MediaSmart\buttons

  Scroll to the bottom of the window, there are at least 7 button xml files... I edited those with XMLNotepad with admin privledges to point the "buttons" on the update locations

  This fix is for windows 7 64 bit

• HP Pavilion 17: need reset bios password

  Need bios password checksum is 2B65BB6A

  Hello

  Your laptop is to produce a code hexadecimal halt which is stored in the ram as a 'one stop' and is recalculated after a reboot.  This indicates that you have a FRIEND bios later and unfortunately none of the current code generators will work - surprisingly, you can always remove power on password of the machine by removing the cell RTC (leave the connected Power Board) then hold down the power button for 60 seconds before reinserting the RTC.

  The bad news is that the RTC is on the 'wrong' side of the system board, so it will take a lot of disassembly.

  The only other option would be to Contact HP in this regard.

  Kind regards

  DP - K

• Pavilion g6: disabled Code Bios

  My BIOS is locked by default and I do not know the password, I have disabled BIOS code 53185940

  Hello

  Try: 42883386

• OptiPlex 960 SFF, 1 & 3 problem code, would someone please help

  Hello

  I hope that everyone who reads that it is good and functional to become great.

  I asked if someone could help please.

  I have an Optiplex 960 SFF.  Food was abuzz very badly so I decided to replace it.  Found that they were very expensive, so looked for a cheaper, I'm not rich, or even ok now...    Found two units tested on ebay for $25 shipped, a lot, I thought, get two because they apparently know often fails.   However, didn't know that I needed units with card connection pico mother or mini ATX.  The ones I bought were from the Optiplex 380.

  After graduating from them, I thought I could cut the old pico or mini connector atx and old wire and reuse.  Use a voltmeter and formatted all the tensions of old vs new, wire colors, etc.  Got all doing just that in the last days, removed the pins with trombone tool, etc...  Welded to the top and narrowing of heat or saved the cable connections, tested the connections to ensure that all voltages were correct and match old unit, etc.

  Unit is installed again, son were a little long, but everything worked very well.  Summer update w7 64 from the microsoft site, had a lot of downloads that the os was recently re - install.  About 3/4 through the installation of 120 updates the computer just went poof (no noise or smoke) and just off black screen.  Thought that maybe something happened with updates, waited 2 minutes and turned the system back.

  Now the system does not start BIOS, get the codes error 1 & 3 with color flashing amber, repair indicates might be the motherboard, power supply or problem devices.  I tried re-booting etc, stirring 24 motherboard connections pins, once it has started up, but left shortly after.

  So, anyone got any ideas on what could have happened?  The LED on the back 'lights up' when you push the button ps, so the manual says motherboard might be bad.  Can any ideas on how I tell if it's the motherboard or something else?  I re-tested the motherboard 24 ps connector pins, all voltages are correct, and even all ground wires are works well according to Continuity test.  I'm just a beginner computer repairman, so any help would be greatly appreciated.  Thank you, Joe

  Hello

  Hope everyone is doing well this week, living longer.

  The new ps has seemed to work, went to post fine and then the operating system loaded correctly.  Ran that all updates to the os and the pass mark burn in test and performance of programs.  All of this work to the original specifications.

  Therefore, the solution = get exact dell p/n replacement or exact equivalent by technical support dell or knowledge of the forum.

  In this case an oR225m worked as replacement for R225m [235e-00] in a unit with the Core 2 quad processor T9600.

  Wouldn't try to rewire a new card connector mother atx mini/pico on another unit.   I pulled all the pins and welded the new connections of the cables, all the tension and tested as valid patterns, but still apparently failed ps.  Not sure if optiplex 380 ch output components are somehow different model 960 or if just one that I did not.   Spec on the 380 unit tensions were still with the exception of a different on an exit of a volt.  Including substitutes research of time spent, many hours reworking new unit, disassemble several times and others, he still do not finish work for a long time.  It worked well for 15 minutes then failed.  , Therefore, just try and find a new replacement unit or two units, as apparently these units fail ps are somewhat often become scarce.  PS units drawn never used 'new' units that have been taken to sell parts are available if you're looking for a lot.  I think that two of them would be enough to last you longer than the duration of the motherboard and associated components.

  In addition. the size of SFF has not really enough room for barely any son of length of ps to the motherboard.  The reworked unit I tried had only about 2-3 inches of extra wire and did not always easily or well.  Withdrawal of 20 pins (2 empty pin slots and 2 ground wire (black) needed no adjustment) and all the wires to solder connections took time.

  Thanks to especially Osprey and also rdunnill.

  quote of the day = A great tomorrow is created from good decisions today, so go like this!

• HP Pavilion t160.nl Desktop PC pilot, please help?

  I have HP Pavilion t160.nl Desktop PC and iloset the cd I need the ethernet controller driver and the bus driver

  It is integrated in the motherboard

  Please I need it is important

  & I findout that there this lan Realtek 8201BL card

  Gr. Tarek

  You can try install the following: http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

  They should install the drivers from nVidia nforce 2 and I hope that will fix your ethernet and sm bus

  (Details of your chipset computers are here: http://support.hp.com/us-en/document/c00027837)

  Hope this helps, let me know how you go.

• I downloaded the new version 25 times and it still saying I need to update it please help

  I have a problem with banking and paypal who say I need to update my browser went to feedback from firefox and the screen says I need to update. I get crazy and do not want to use chrome or using internet explorer, I was very happy with firefox pleasse me

  Your User Agent shows you Firefox 3.6.3 installed. Some add-ons can cause an incorrect to show User Agent. In strongly suspect BLNGBAR as indicated in your User Agent (click on "Details more system" to the right of your original question, scroll down to see your User Agent):

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 BLNGBAR

  BLNGBAR can be this: http://blingee.com/plus
  
  Uninstall it if you

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  Once which is uninstalled, follow the instructions in this article to reset your User Agent:

  • See-> https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent

  What is a User Agent: http://en.wikipedia.org/wiki/User_Agent

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox