HP Pavilion laptop 2210sa g6: replace g6 computer 2210sa Pavillion laptop original with SSD hard drive

He currently has a hard drive of 1 TB, I want to replace it with an SSD of 256 GB I don't have a lot of space. This laptop has 10 Windows upgrade and currently active on that. I don't want to clone any data on so I intend to make a gain of 10 DVDs or usb Microsoft Web site installation media. I am told by someone at HP who. This will activate active Windows of the info of the motherboard is NOT disk hard someone else it tells me I have to buy a new copy of details of them, I think that this information is incorrect, please someone could confirm. Also, the procedure with the bios, I know that I have to disable secure boot and enable legacy while booting from the installation media I do need re secure boot activate after or not to worry. I would like to have clarification on this thank you.

Put the 256 GB SSD in your laptop and use the 10 Windows install media. My understanding is that when your equipment has enabled with Windows 10 on an upgrade of active Windows 7 or 8, you can reinstall a clean installation and activation servers will recognize your hardware and activate.

You are not limited to hard drives listed in the service manual. This is what HP sold. Just as you can put any tires on a car, not just those offered Chevrolet.

Tags: Notebooks

Similar Questions

  • Pavilion g6-2330ee: SSD hard drive

    Hi all

    I have HP laptop Pavilion g6-2330ee.

    My quastion is: my laptop supports the SSD hard drive?

    Thanks to you all.

    Hello

    Yes, he does. Nothing can stop it. Please use ONLY know brands.

    Kind regards.

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • HP Pavilion 17-e186nr: SSD HARD drive and optical drive with HDD switch

    I have a
    HP Pavilion 17-computer e186nr laptop running Windows 8.1
    Product model: http://support.hp.com/nz-en/product/HP-Pavilion-17-e100-Notebook-PC-series/5401229/model/6617177/pro...

    Processor: AMD A10 - 5750 M APU with graphics Radeon (TM) HD

    CD-ROM: hp DVD a Beltway. DU8A5SH SATA CdRom

    I have 2 questions about my laptop which I couldn't find answers to on the HP product model page or the Device Manager in Windows

    1 > I know it's still backward compatible for best performance on my SSD, I want to know if my laptop supports SATA III - 600 GB/s of speed?

    2 > I buy a caddy optical Bay for my current 2.5 "SATA HDD, what is the size of the optical drive on my laptop (12.3 or 9.5) mm?

    @Neoplasm

    Hello

    To answer our questions:

    (1) the laptop must support SATA III 6 Gb/s transfer rate.

    (2) it is not made on the replacement of the optical drive with a HARD drive dad. Where this caddy is available from?

  • Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

    Satellite L50 - A - 1 DG

    I would put my SSD in the PC and install win7 on it. But it does not work.

    I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

    I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

    Someone knows what's the problem?

    > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

    This does not work with all models of laptops.
    As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

    One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

    You said that you are not able to access the BIOS after these updates.
    Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

    The comments appreciated.

  • 17i wanted to replace SSD HARD drive

    I just bought a new screen Envy 17 t tactile image with a 1 TB HARD drive 5400 RPM. At the same time, I bought a new Samsung 840EVO 500 GB SSD with the intention to replace the slower HARD disk with the fastest SSD. I thought it would be a simple switch (I replaced the older drive in my laptop with no problems). I thought it would be a few screws and a small sign removed from underneath the laptop and everything would be made.

    But after I got the new machine, I got everything install and running and left information for the SSD HARD drive, I have everything off and returned the machine and unfortunately... There are no signs (as described in the documentation) that I expected. She only siingle piece!

    How to HARD drive to replace it? Am I supposed to remove all the screws and remove the bottom or top (where the keyboard is) does jump off and you have access from above?

    Help!

    This model requires the removal of the top cover to the hard disk:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04339451&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0007

    This is not a procedure authorized user and will jeopardize the warranty if something is wrong in the process.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • If your computer comes with a hard drive of 32-bit pc will work better by adding another hard drive of 60 bits or transfer all files on the hard drive of 60 bits?

    The pc is a hp pavilion a706n and windows vista ultimate.

    Hello

    You confuse the version of Windows with the hard drive.

    A hard drive is a physical device for Windows (operating system)
    are the programs installed. When the data is created and saved which are written in the
    hard drive. A hard disk is analogous to a wardrobe as a storage device.

    Hard drives are not little dependent, which means that you can run Windows 32 or 64 on them
    If the rest of the system is compatible with every version.

    Windows can be 32-bit or 64-bit. But not all hardware systems can run both.
    Many 32-bit systems cannot run 64-bit Windows.

    Your computer came with at least a possible hard disk to add possibly
    internally, and certainly outside.

    WiKi - hard disk drive
    http://en.Wikipedia.org/wiki/Hard_disk_drive

    As TrekDozer said that your computer cannot run as 64-bit Windows if you need to stay
    with 32-bit Windows. However, you can add additional hard disks of extra disk space.

    Check with HP support, their books online and the drivers, diagnosis, and
    their forum are good sources of information from others with the same or similar
    systems.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive. What are the steps to achieve this?

    original title: can you help me?

    My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

    My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

    Go to computer stores, get an external hard drive of 1 TB capacity. Ask for one that you can just simply copy and paste to transfer files.

    I have a. Digital WD Elements. 1 TB vapacity. It works very well. No action of fancy, complicated to transfer, just copy and paste or drag and drop files.

    I also use it to make Sysytem Image backup.

  • Pavilion G-6 2209au: Pavilion G - 6 2209au exchange for SSD HARD drive

    Hello I have this have upgraded with 6 GB ram and now want to replace the disc for one SSD HARD drive, I read in the forms some how you need to change the bios when you do so, what measures are necessary for the ssd to function? I don't like about backing up files, I'll use as an external HARD drive. Also I have the apu a4 4300 m and would like to get 10 4600 m cpu is this hard to replace or should I pay someone? Thanks for the support

    That's what you have:

    http://support.HP.com/us-en/document/c03551667

    It is the repair:

    Manual

    From the outset I see that you only have 2 GB of RAM. Very easy and inexpensive to spend at least 4 GB. See page 46.

    The motherboard is the motherboard. There is no upgrade available. However, you have the CPU AMD A4 and you might fall into a 10 - 4600M. See page 83. It would be a major update and only would no treatment faster, but would provide a slightly better video chip since it is a "APU" with processor and video on the same chip.

    Finally, you can exchange the mechanical drive to a SSD drive. The upgrade of the speed would be very noticeable.

    That @banhien meant, however, the cost of this can equal or exceed a new laptop. and almost certainly will if you need to pay a technician to do it. The first update I is the RAM, then the SSD and then the last would be the CPU. If you need any help post more come back.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Why my computer will not pick up my external hard drive?

    Why my computer will not pick up my external hard drive?
    using Windows 7 sp1

    Original title: usb

    Hello Fred,.

    Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

    1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

    2 do a reset power coercive.

    1. Unplug the power cord. Then (on a laptop) remove the battery.
    2. Unplug all USB devices.
    3. Leave it alone - don't connect or reconnect the devices for several minutes.
    4. After several minutes plug the power supply cord.
    5. Then install the battery.
    6. Turn on the computer and restart as normal without plug any USB device.
    7. Connect your devices one at a time and let them install as usual.

    The external hard drive works now? If not, go to #3.

    3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

    I would like to know if one of these methods works for you. After back here with your results.

    Kind regards

    BearPup

  • My computer crashed and I restore my my hard drive recovered Thunderbird email, how do I restore my old emails (stored emails and accounts)?

    My computer crashed and I restore my my hard drive recovered Thunderbird email, how do I restore my old emails (stored emails and accounts)? I found 2 folders (a local sub) & another under roaming which appear to contain my email stuff. How in Thunderbird set up again to access my old emails/files? Also, I have three accounts/email configuration in my old email. Thank you!
    -Erwin

    Create a new profile and copy the one above him. See this article for instructions.
    http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it

    Your old profile is located under "roaming."
    For Thunderbird there is nothing that you need to restore from "local."

  • iMac mid-2010 for one SSD HARD drive replacement

    Hello

    After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

    The iMac in question is a model 27 "2010.

    Here's what I have on order:

    I also ordered suction cups and relevant screwdrivers.

    I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

    Cheers in advance

    Ian

    Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

    The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

    Good luck

    Sam

  • How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

    How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

    See this support article:

    http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  • Y480 - laptop does not start with attached hard drive enclosure.

    My laptop started clicking and will boot LAN, so I opened it and looked at the hard drive. All seemed well, it wouldn't be fair to start. Then I removed the metal casing around it and stuck the drive in. Everything started normally. Chkdsk shows nothing wrong with the hard drive, and I'm not sure why remove the dressing would affect startup. All the thoughts/solutions?

    Blue... temporarily parts of the sponge to keep the HARD drive in place.

    and if your Y480 is still under warranty, can consult a Support technique Lenovo...

    http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

    Good luck... Zehn

  • Replace T420s with a new SSD HARD drive

    Hello

    I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

    And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

    This SSD model will be compatible?

    Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

    Thank you very much

    Guy

    Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

    The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

    With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

    Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

Maybe you are looking for

  • Constantly check addon compatibility on new install v32

    Since I updated to the latest FF v32 it always checks the compatibility of the addons whenever I start it. It was really boring, so I went back to a previous version and everything worked well, all the addons worked and there was no question but this

  • Failure of system recovery - hangs on check for support in drive E

    Currently, I install a new hard drive on my Satellite P300 laptop (running vista Home premium service pack 2). I installed the new hard drive and insert the first disc of recovery and the recovery process starts well. The following text appears on th

  • Missing Windows Media Player plug-in

    When I am trying to play web videos on my nsx40gt1 get the error message "Missing Windows Media Player plugin" on many sites... Is it possible on the browser chrome on my sony internet tv to run this plugin?

  • Driver Manager

    I uninstalled 'driver manager' option 'programs and features' on the Panel in error. I confused this is the source of a ToolTip that kept appearing on my screen and cause irritation. As you can gather I'm no computer expert, and now I like the driver

  • OfficeJet pro 8500 a print only if first been disabled then

    I am using a HP Officejet Pro 8500 has connected to a Mac running OS X 10.6.8 version - the printer will run only jobs if I unplug the power to the printer and turn it on, allowing him to warm up to print - any ideas on how I can get the printer to r