HP PSC 1500 works only when I print the first automatic test.

Similar Questions

• Hi, I own a first Professional CC Production - full license for windows7 (use it to work). When I installed the first time I had also installed Cloud creative office. Now, since I had to move on to another workstation, I uninstalled

  Hi, I own a first Professional CC Production - full license for windows7 (use it to work). When I installed the first time I had also installed Cloud creative office. Now, since I had to move on to another workstation, I uninstalled then reinstalled and complete the old workstation to the new but creative cloud has not been reinstalled, and I can't find a way to do.

  It works... Thank you very much!

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• When I print, the photo viewer rises and am OBLIGED to print from that program. The problem is, that it does not work - the colors are inverted and incorrect. All attempts to correct in the color management failed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • When I print, the photo viewer rises and am OBLIGED to print from that program.  The problem is, that it does not work - the colors are inverted and incorrect.  All attempts to correct in the color management failed.  Some images are color reversed negatively. and others not when the print window picture viewer options are increasing. and every time I print a normal color on the picture he reverse out come.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  didn't work :/

  ==============================================
  It may be interesting to try to remove all color profiles in the color management.

  Windows 7 - change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  If this does not work... update or just reinstall your printer driver may be worth a try.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Lightroom works only when online?

  Lightroom works only when I'm online?   I have to be online to deal with or work on files?   If I can't be online, for example, when, in a remote area without service, how to treat my photos?

  You can easily test this by cutting off all access to the network to your computer (turn off wi - fi or unplug the network cable). You will find that you can still get stuff done if there is no Internet. Especially if you use the version without subscription of Lightroom, which didn't need archiving at all once it is first licensed.

  If you use Lightroom via a subscription to creative cloud, the annual plan has a limit of 99 days offline (more than 3 months); the limit is 30 days offline for the monthly plan. And if you stop your subscription, you always have access to your images and some features of Lightroom.

• Dynamic links works only when the AE project is open

  Whenever I start my project to create, all my images load, but where there is a dynamic linked after effects composition I just get the yellow "media Meanwhile chart» If I try to recreate a link to these compositions to the original after effects project (there is only 1 project with comps about 7 inside), first simply freezes, and my only option is to force quit it.

  If I try to reimport that after effects project that it freezes and I have to force to leave. I tried to create another after effects project with just a simple piece of text in 1 composition and then import and sometimes with the dialog "Import after effects compositions" but then there is simply nothing but show progress who never does anything bar a "connection to the server of dynamic links".

  On other occasions, when I try to make a shape any dynamic link import first just freezes and I have to force quit. It seems to be a problem for me with dynamic link, which has happened recently. This may be due to an After effects Scripts, I recently installed? Can they affect dynamic links?

  SOLUTION: I found a solution, but it is not ideal in case I've had several after effects in the first projects. I can open the 1 after the effects of the project first, and then when I opened the first links to the project and the individual compositions seamlessly. BUT if I close after effects project while still in first, first freezes and I have to force it to quit. If something is terribly wrong with this project.

  Okay, I think I found the solution.

  First of all, I went through and deleted a third after effects scripts/Script UI panels/third party plugins to see if that was causing problems. I then tried again and found that it still had the same problem, so it wasn't because of that.

  I then found someone in a forum that said deleting the folder Adobe containing positioning preferences and other things found in the documents of the user. I deleted it and as I forced quit 2 process of "aselflink" which seems to be running in the background. I also deleted my preferences AE holding Option-shift on the after effects startup and launch of the first.

  A combination of all that, now a dynamic link is working smoothly again. I go to a time not so crucial for my current project finished, reinstall the scripts etc and make sure that it was not caused by them.

• HP Pavilion x 2: computer hp laptop pavilion x 2 works only when the Tablet is removed from the keyboard

  Hello

  My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard.  It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.

  Pat

  Hello @pmm25,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• When you print the playlist in itunes TI overtyples causing garble

  When I print the playlist in itunes, it overtypes but when I print any where else on my computer, it works fine. Apple has just made an update a week ago.

  If you cannot print from itunes, but all the rest print well? then try to contact apple support team

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• All-in-One printer, V313 All in One Printer, W7 only prints the first Doc.

  Hello

  My apologies if this has been answered in the past (but I'm not).

  I just swapped from a Win XP machine on a W7 machine and now my AIO Printer Printer Dell v313 only prints the first document.

  The second honored document Mile makes the hiccups of the printer, but nothing happens.

  I have uninstalled and installed the software from the Dell website, and I'm at a complete loss as to why the pilot does not print the second document.

  Fortunately, I still have the XP machine and it has no problem printing of any document sent to the printer.

  I thought I'd be cleaver and tried to copy the folder I thought that contain the driver files anywhere in the W7 machine but that no longer works.

  Help, please.

  Stephen,

  IE11 withdrawal is the best solution.

  The other solution is to disable the ToolTips for the printer, but then you can't see if the printer is printing, ink status, etc..

  Start, Control Panel, devices and printers, click with the right button on your printer, left, click Printing Preferences, advanced, more options.

  Click never see the.

  Rick

• Use layers only when reading in the plugin file format

  Hello

  without specifying

  FormatLayerSupport {doesSupportFormatLayers}

  Photoshop flattens a file somehow, when several layers are present. When I didn't support layers everything worked. I got the alpha the alpha form and additional layers have been flattened.

  How photoshop flatten these files;

  I ask because I had to implement support layer for my playback format. Got it work thanks to this

  How a multi-layer image in reading/writing a format Photoshop plugin?

  Unfortunately now my writing code does not work. When you remove the {doesSupportFormatLayers} FormatLayerSupport, his works again.

  How can specify to support only layers to read and not write;

  I tried setting ps.formatRecord-> data = 0; in the ReadPrepare function but it does not work.

  Thanks in advance

  DiMI

  I see that there is no relevant response from the list or Adobe Tech.

  I'm reproducing the AdvanceState() feature. Instead of letting Photoshop give me the buffer I access to the

  ps.formatRecord->-> mergedCompositeChannels, alphaChannels, mergedTransparency directly documentInfo and fill my image buffer.

  It seems to work. Keep yo posted if it turns out ok.

  Photoshop has simply different behaviors when {doesSupportFormatLayers} FormatLayerSupport is active. For example, when I have a picture of the alpha layer and fill planes to get all 4 plans using AdvanceState() it crashes with an internal message. It's one thing to photoshop, if you remove the FormatLayerSupport, or get just 3 shots and not the 4th (Alpha) then its ok...

  All this is to avoid if you use AdvanceState() and fill the buffer of yourself...

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• When I print, the left side of the page is faded or unclear

  Original title: print printer print

  When I print, the left side of the page is faded or unclear

  Hello

  Uninstall and reinstall your printer by using the drivers and the information at your printer manufacturer's Web site.

  Equip your printer model and operating system it for this information and it should also be troubleshooting steps for her also.

  See you soon.

• His error when I enter the first ('1') character in password wifi to printer MX470

  When I try to enter the wifi password to connect my MX470 to my wifi router, I get an error sound when I get the first character, which is be a '1 '. All other characters are accepted silently, but of course the password won't work without the '1 '. SO frustrating!!

  I found in the manual how to set the manual online how to set the keyboard entry