HP SCANJET 4890: HP SCANJET 4890 does not not after update of November 1511 10 Windows

Similar Questions

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Fullsceen Slideshow works does not after update (2015.2)

  Hi-

  Since the upgrade to the latest version, I note that the slideshow widget full screen does not work. He works within the Muse app (although that it crashed Muse sometimes when using), and although it will display with the built-in preview of Muse, as soon as you try to make an overview of the slideshow browser does not at all, it's all white.

  To make sure that it wasn't a problem in conflict elsewhere on my site, I tried to create a new site of the Muse and the only thing that I add to the page is a slideshow full screen and leave all the default settings (photo galleries and everything) and still nothing loads at all except for the next/previous/counter options.

  Hi BLSMagazine,

  As I suggested above, have you tried to view your site on another browser?

  Kind regards

  Ankush

• Flash still does not after him to do so on windows 8.1?

  I followed the instructions on the help and compatible flash section, but it still does not. Then I tried to download it and the page takes me to the procedure to follow to activate it.

  I just bought a new laptop and it is completely up to date with 8.1.

  Any help would be appreciated.

  Flash Player is actually integrated in Internet Explorer on Windows 8 and 8.1.  There is nothing for you to download or install it from Adobe.

  After the description of the problem, looks like you're going to a Web site and send a message that Flash Player is not found.

  On most sites, there is JavaScript that determines which version of your browser and Flash are installed, so that it can determine what content to show you.  In Internet Explorer 11, Microsoft has changed the string that identifies Internet Explorer for these scripts, and it is very likely that the Web site you are visiting needs to make adjustments to account for the change.  There will probably be a chaotic transition period, as web properties major pointed out the problem and fix it.

  Meanwhile, Mike's suggestions are good.  Use Compatibility Mode or another browser.  You can also contact the website (especially if they have a small shop) to make them aware of the problem.  You are on the end at the beginning of the adoption curve, and they may need up to a leader.

  Thank you!

• App update work does not after updating IOS 10

  Hi guys,.

  After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

  Tried via 4G and Wifi but no difference.

  Help much appreciated.

  Thank you

  TBirdGarage

  Restart your iPhone, and then try again.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Phone no ID number does not after updating ios 10, showing "unknown"

  Hi, I have recently updated to ios 10 on my iPhone 5s, after which my phone in the tab displays "unknown". Also I am not able to change a put my number inside. How to solve the problem? Asked me again activate Facetime and iMessage.

  Hello Milan_Mumbai,

  I think I understand your unknown phone number display in your settings. Also, you are being invited to activate new iMessage and FaceTime. These two issues have started after the update to iOS 10. I know not when it can be on your iPhone is not behave as expected after an update. I'm happy to help you.

  If there is a problem with your phone number in the settings, it could impact the iMessage and activations of FaceTime. First of all, I recommend you restart your iPhone. Restarting may solve many unexpected behaviours. Please use the steps below to restart if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, follow the steps below.

  1. Make sure that you are connected to a Wi-Fi network or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
  2. Go to settings > general > Date & time and make sure you have properly configured your zone.

  If you get an error when you try to activate FaceTime or iMessage

  Have a wonderful day!

• Add-ons - works does not after update

  Since the update to Firefox 42, I had to refresh it and among a long list of other problems my modules do not work. When I click on tools > Modules I get the error message "cannot find server".

  How to solve this?
  Thank you.

  • 1 Download Firefox for all languages and systems v42 {web link}
  • 2 Uninstall Firefox on your computer {web link}
    DO NOT REMOVE your profiles.
  • 3 after that, restart the computer. Then, run the full installer.

• Pavilion G6 2342dx, Wifi works does not after update driver recommended

  Hello. I have Pavilion G6 2342dx running Windows 8. Yesterday, I used HP support assistant to perform some recommended driver updates. Among the things to day was the device of Qualcomm Atheros Wifi driver and the driver of HP wireless button. Peripheral installed WIFI was 10... 222, 10... 212.

  After the update, my laptop cannot detect any wifi network. This shows simply 'no detected networks.' I also noticed that the light on the button wifi (F12) is always white If yes or no I activate flight mode or not. I get a message on the screen of property on the change in status of airplane mode. However, it doesn't seem to be actually toggle the wifi because of the sidebar, it looks like wifi is on but with the message "no media detected" persistent. In addition, wifi on the status bar icon is grayed out with a red x.

  I tried deactivating and activating the adapter without success. I tried to download and reinstall the driver (10... 212) with no luck. I even tried to disable, uninstall and then reinstall the device in Device Manager. System restore fails whenever I have it try. Interestingly, the last driver on the HP support Web site is the 212, no mention of the 222 pilot.

  Everyone has experienced the same? I would really appreaciate help on what I am completely stuck.

  Hi @futoji,

  Thanks for all the help. I finally resorted when you run the upgrade to Windows 8.1 and that seemed to take care of the problem.

• iMessage works does not after updating iOS 9.2

  My wife has an iPad Mini 4 (Wi - Fi only), and since the iOS installed 9.2 update, she could not use iMessage. It has an Android phone, but use iMessage on his iPad to text me on my iPhone.

  Going to settings > Messages and turn off iMessage worked. We read that a possible fix was to try this, reboot the device and turn iMessage on IT. Well, iMessage cannot be turned on ('switch' is not in the on position). Go to the home screen Messages shows a dialog asking for the activation of FaceTime. She puts his user name and password, and it hangs on. Finally, it returns a message that I don't remember everything now (without the unit in front of me), but something along the lines of FaceTime cannot be enabled at this time. Keep in mind, this is when in the Messages, she has not selected FaceTime.

  If anyone else has experienced this?

  FaceTime & iMessage must be active.

  With the help of iMessage

  http://support.Apple.com/kb/HT3529

  IMessage activation troubleshooting:

  http://support.Apple.com/en-us/HT201422

• BBM BBM works does not after update

  I've been using bbm well before the last update yesterday, when I updated to the new version (1.0.0.72), messages are not sent more and BBM seems to not work, anyone having the same number or found a fix? Thanks in advance.

  I have it working again, just uninstalled and reinstalled BBM, everything is back to normal now.

• Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update

  Hello

  My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updated and I do, and I've looked through the settings of the mouse and can't find anything that will help you.

  Can someone help me please?

  Thank you very much
  Ian

  Hi Ian

  Why you n t trying to roll back the BONE to this early time?
  I mean the point OS before you installed the touchpad driver

  Usually, this should help to recover the functions first touchpad.

  Best regards

• For hp dv7 fingerprint reader works does not after updating to windows 8 pro

  I have improved my dv7 with windows 8 preview version and finger print reader perfectally well worked and when I have upegraded to pro it has stopped working. When I upgraded I lost a bunch of programs so can someone help because I loved using my fingerprint reader. Also I have upegraded of windows 7 to windows 8 Preview upegrading to pro version.

  Have you installed a driver of validity? It is necessary before the Simplepass software:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58900.exe

• Volume works does not after update

  I got a Sansa Clip + for a few years now and that you have never successfully updated the firmware.  A few weeks ago, I did.  Since then my volume isn't all set.  I tried to download the older versions, I can find no change in the result.  Any suggestions?

  I've never seen another example here of a disabling buttons firmware update. And if you have tried other firmware and formatted, you erased all traces of what might make the processor fool you.

  Since you have had for years, it may be something mechanical is exhausting, and it happened to coincide with the update of the firmware.  But it is a strange coincidence.

  You could post your problem to AnythingButIpod, where a different crowd tinker more tuners with mp3 players.

  http://AnythingbutiPod.com/Forum/forumdisplay.php?f=119

  It seems that you're fairly computer-savvy. If you feel geeky and experimental, you could install the firmware Rockbox alternative to www.rockbox.org, which is any other operating system made by dedicated open source DIY. Follow carefully the installation instructions you will be able to uninstall it without problem.   If the buttons don't always work with Rockbox, I guess it's just worn out.