HP Slate 7 How do I record voice with the microphone

Similar Questions

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• I hear my own voice through the microphone. How do I stop this

  I hear my own voice through the microphone. How do I stop this

  Sort problem... I increased the sound level of the speakers microphone.

  Thank you.

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• How can I sync lightning with the iphone calendar?

  How can I sync lightning with the iphone calendar? I saw online that I need to use a google calendar? I added google calendar as they described, but I have no idea where from here

  To synchronize with the iPhone (also known as iCalendar) schedule you must use a calendar based on a cloud. If you already have the lightning, install the addon Google provider and Setup Google Calendar. If you have already done so, go to settings on your iPhone. In the e-mail box, Contacts and calendars, add your Google account and turn on the calendar. This will synchronize your Google Calendar with the iPhone.

• How to install firefox last with the custom network home page

  I'm trying to figure out how to do a network with the latest firefox installation, but suitable for the bringing into default homepage for the intranet portal of companies. I have several thousand computers that require installation and pushing by network is the only realistic method, but I can't find a solution on how to change the homepage for this. Help, please!

  See:

  • http://Mike.kaply.com/2012/08/29/setting-the-default-Firefox-homepage-with-AutoConfig/
  • https://addons.Mozilla.org/firefox/addon/CCK/

• How to drag a desktop with the magic trackpad icon?

  How to drag a desktop with the magic trackpad icon? It is coupled with a Mac Mini El Capitan 10.11.4 running.

  Thank you.

  Place the cursor on the icon then press on and hold and drag your finger across the surface of the touchpad.

  If problem, then check your trackpad preferences.

  Note also you maybe isn't able to move them they will break again) if other that None is selected in the sort by if you hold with two fingers and choose

• my audio syestem of beats went when I choose windows 8, how can I return it with the full version?

  my audio syestem of beats went when I choose windows 8, how can I return it with the full version? I have hp pavilion dv4 5110tx

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59882.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8.

  After reinstalling, restart the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again before checking if the Beats Audio is now listed in the windows control panel.

  Kind regards

  DP - K

• How to take a photo with the Acer Iconia W 4 820

  Hello

  Anyone know how to take a photo with the Acer Iconia W4 820 Tablet and get it back on my pc?

  hans0919

  Easiest is to copy the files with a USB key, but the most elegant (IMHO) is across the network. Just join each machine to your homegroup, and you can copy back.

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• How a microwave oven interferes with the WIFI signal?

  MICRO-WIFI INTERFERENCE

  Please explain THAT HOW A MICROWAVE actually INTERFERES with the laptop WIFI signal...  How to turn off the oven microwave takes the PC adapter, for example?  When the microwave oven is off and don't use it, should also be disconnected? In the equipped cafes in WIFI, are microwave ovens, degrading the quality of the signal?

  I thank very you much for your comments.

  Joe

  This is caused by the fact that both microwave and most wifi routers operate at a frequency of 2.4 Ghz, there is a setting on some wifi routers that allow you to operate at 5 GHz, but this frequency moves not by walls well, insofar as they interfere, the microwave should not disseminate its frequency outside the oven microwave and most of the routers wifi broadcast in all the directions, radio waves can bounce off the walls and envelope the room and other areas as well, this isn't a line of site, so unless you have your computer very close to the microwave you should not receive any interference at all. or course, if you stick the router inside the microwave.

  Hope this helps,
  -Ray

• How to open a file with the extension .odg using Vista?

  How to open a file with the extension .odg using Vista?

  Hi Defiant503,

  Thank you for visiting the forums of answers.microsoft.com.

  I did some research and a file ending with .odg is an OpenDocument Document OpenOffice/StarOffice (Ver 2) of graphics by Sun Microsystems, Inc.    This means that in order to open this file, you will need this program to open it.  You will not be able to open this file with Vista.

  I hope this information helps.

  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Hi Purple % 20Lambs,

  Please contact Adobe support:Contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  In case you can't reach Adobe support, please see:

  Contact the technical support FAQ: Impossible to reach support via the link "contact us".

• I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to animate a line with the pen tool to give the impression that it is plotted?

  How to animate a line with the pen tool to give the impression that it is plotted?

  Or you can choose the pen tool (g), set the padding to zero and the race to what you want, then draw a path, then press U twice to reveal all of the properties that have been changed for the layer, and then click Add (top-right) and select Connect the tracks.

  To make the race work just animate the start or end point and sent to paint on original or reveal original or normal.