HP T520: Screen blue T520 with error code 805D 0070

Similar Questions

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

• Blank screen, no beeps or error codes.

  HI I have a HP 2000 nopebook PC and its gives me a black screen no beeps or error codes. I can hear the sounds of start-up and see the screen illuminates upward and then darkens. When I plug in an external moniter happens.  I tested the memory, the inverter, I tried to drain the battery and even tried to update the graphics card and still nothing.

  Help, please!

  Yes! You are right. The laptop did work normal without any problems, but your laptop screen has gone bad and needs a replacement. HP will provide a screen for your laptop of replacement if warranty is active, you can check your warranty here to check the status

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10)

  Hello

  We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10) on windows server 2003 please suggest solutions for this problem

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Xbox it comes up with error code 0 x 80070102

  Original title: Xbox one

  My profile worked fine until today. I used, put a game on hold so that it loads and then it asks "who are you? And I select my profile and enter my password. Then, he thinks for a while and recharge the profiles and said nothing. So sometimes it comes up with error code 0 x 80070102, and I came here first of all she says to do is restart.

  My ordeal to live could be out of date?

  Ask here as Xbox has its separate forums:

  http://forums.Xbox.com/

• Windows 2008 SP2 installation failed with error code 0 x 80041002

  Hello

  I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

  I tried the steps in http://support.microsoft.com/kb/947366:

  1 uninstalled antivirus.

  2. install KB947821 analysis tool

  3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  Without success. What should he do next?

  Thank you

  Frank

  Hi Frank_673,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot download kb978886 with error code 80070570__

  Cannot download kb978886 with error code 80070570

  yogiyogi,

  0 X 80070570 - ERROR_FILE_CORRUPT

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt. Right click on command prompt and select "Run as Administrator"http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token >

  and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  See if that solves the problem. If not, run the updatehttp://support.microsoft.com/kb/947821system tool >

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this - > unfinished Validation: ActiveX error with error code [0 x 80080296] .__What can do? Thank you n God bless.

  Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this---> Validation incomplete: ActiveX error with error code [0 x 80080296].
  What can I do? Thank you n God bless.

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What problems do you think that reinstalling Windows can solve?

  Did you do a repair installation, or you format and do a clean install?

  =================================

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab, and then click the copy button (on the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Unable to recover the TCP/IP connectivity & corrupt Winsock keys with error code 11003

  After being unable to solve the problems created by the McAfee download causing failure DComm and lost connectivity I uninstalled SP 3 and reinstalled.

  I have a corrupted Winsock2 registry and auto config proxy TCP/IP keys and detect the proxy appear as 'not available '.

  I tried to reset TCP/IP using netsh int ip reset c:\ reseting.txt and also the use of the patch tool.  The error code is the function IntHelper.dll in IPMONTR. DLL could start with error code 11003.

  I am able to visual determine that the winsock keys are corrupted, as described in kb/811259. I tried to reset the winsock2 registry keys by using the netsh winsock reset command. The error code is the IntHelperDll function in IPMONR. DLL could start with error code 11003.

  I would like any suggestions or ideas that anyone can have for the restoration of connectivity.

  Oh, and I'm not going to use McAfee products in the future.

  Thank you.

  Hi there nzcleman,

  Download and run LSPFix from here: http://www.cexx.org/lspfix.htm
  Read the instructions on how to use LSPFix carefully here: http://www.bleepingcomputer.com/tutorials/tutorial59.html

  Once executed, restart your system.

  Now download and run WinsockXPFix from here: http://majorgeeks.com/WinSock_XP_Fix_d4372.html
  Restart your system once again WinsockXPFix finished (even though it should restart for you).

  I hope this will help :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643

  A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.

  He did this repeatedly over and over again all week.

  How can I fix it?

  Hello

  Method 1: download and install the update manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294

  Method 2: Perform the steps from the link below and see if it solves the problem.

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  Hope this information helps.

• KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  Run the automatic fix here and try again once the update manually by downloading it from HERE

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads