HP Touchsmart G068CL: Install windows 7 on a laptop HP 15-G068CL AMD A8 6410
The laptop came with 8 windows pre installed and then I upgraded to 10. Since then, the processor has become much slower (not the one he was very fast), but still, want to downgrade to windows 7 and all format. How can I do? Thank you
We will check the BIOS again. There should be a secure boot startup option / legacy perhaps under Security. This is where the facilities of Windows 7 can be a problem. Windows 7 does not support secure boot and you must turn it off and enable legacy start. What your boot menu looks like... are devices described as UEFI in the start menu?
Tags: Notebooks
Similar Questions
-
Does anyone has installed Windows 7 on a laptop Pavilion DV2175
If anyone has installed Windows 7 on a laptop Pavilion DV2175 and if so it is 32 or 64 bit
Hello:
There is an unofficial update guide to windows 7 for the series dv2000.
Given that the maximum amount of memory, that you can install on your laptop is only 2 GB, I'd go with W7 32 bit, as a 64 bit OS requires more memory and disk space to run a 32 bit OS only.
Not double, but more.
-
Please
I want to re - install windows xp on my laptop but I don't have the resource cd. only I have the key to product label I can do?
also my frist question is that if I install this version (xp sp3) with my product key, it will be legal?
The downloaded file CANNOT BE USED TO INSTALL WINDOWS.
It is not a question of legal or non-legal. The file you download is not complete. The downloaded file will update an existing installation of Windows XP Service Pack 1 or Windows XP Service Pack 2 for Windows XP Service Pack 3.
Right click on my computer, then select Properties. The screen say for your version of Windows, including Service Pack?
Re-installation of Windows may or may not be the right solution for your problems. If you want to re - install Windows, read this article on the Toshiba site--> http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=restore+windows+xp&x=7&y=9 in particular the section titled "using the recovery partition Toshiba HDD recovery utility '
-
I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.
Hello
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
Here's how to do a clean install of Vista:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
See you soon.
-
Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .
original title: Wireless problems after install.I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help
Question... You have whatever it is listed in the "Network adapters" section of "Device Manager" now?
While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.
You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included. This could be a hardware problem PURE.
-
I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Mick Murphy - Microsoft partner
-
Cannot install windows 10 on my laptop because of Windows Family Safety Filter.
I can't install windows 10 on my laptop because of Windows Family Safety Filter. I tried to uninstall this app but still no luck.
Original title: upgrade Windows 10
Try to upgrade manually:
If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
need to install windows 7 but the laptop has initially windows 10
Hello
I need to install windows 7 but the laptop has initially windows 10.
I'm not very satisfied with windows 10 because we need to separately purchase MS office.
can someone guide me pls the process...
Option 1:
How Downgrade Windows preinstalled 10 for Windows 7/8.1
Option 2: (recommended)
How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first
Buy Microsoft Office
Office of 2016 for the House, students and professionals - Microsoft Store
-
Clean install windows 7 on my laptop EasyNote LM85 error "starting windows."
Original title: installation of windows 7.
I try to clean install windows 7 on my laptop than easynote LM85 DVD or USB, but it won't go beyond the screen when he say "s windows startup".
After that appears a few seconds later, my computer restarts automatically and start again, I cannot access the menu facility
help please I have had this problem for weeks the only OS it install me is winxp pro
Hi Aurélien,.
Thanks for the reply.
Did you run the assistance of upgrade of Windows 8 on your computer?
Upgrade Wizard: FAQ
http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ
Let us know the result of the upgrade wizard.
-
I installed windows 7 on my laptop, I lost my product key, I want to see my product key in the system although kindly help me on this.
because of your offensive and derogatory terms in another post I'll do indicate to search for a program of keyfinder. F bombs are not allowed here.
-
HP Touchsmart 15R017dx: install windows 8.1 on new SSD from the recovery disk
Hello
I recently bought a 275 GB SDD to replace a Go 520 crushed SATA HDD. Because I don't have a recovery disk created, I ordered the HP Win 8.1 recovery disks. I followed the instructions and the Disk 1 formatting process completed successfully and I was prompted to insert disk 2. At this stage the process crashes after the dvd player starts rotating. Nothing I o will cause the process to continue. The problem is the size of different readers?
Thanks for any help.
Hello:
See if, by your own plain W8.1 installation media, you can reinstall Windows 8.1.
https://www.Microsoft.com/en-us/software-download/Windows8
The only downside is the OEM product key in the BIOS.
However, there are workarounds like the one shown below to find out how to get the product key in the BIOS to work on your new installation...
http://superuser.com/questions/697253/clean-install-Windows-8-1-or-Windows-8-from-OEM-key
-
Install Windows 7 on a laptop HP 255 G2
Hello
I want to install Windows 7 64 bit on an HP 255 G2
but I think that it is the AMD ACHI drivers installtion to ask for the drivers.
on the download page on HP Support, there is no, only the chipset / graphics driver.
I downloaded the graphics driver found the ACHI sp64331\Packages\Drivers\SBDrv\hseries folder,
copy on a USB key, but with luck, windows does not find the drivers.
Try it with all the files, but nothing.
Any ideas?
Thank you
John
Hello
Thank you for your quick response.
The problem is the USB 3 port, I connect the Flash of USB Intsalltion Windows 7 on USB 3 port and installation has been requested for drivers USB 3.
Changed the port and everything works well.
Found the solution here:
3 USB is on the left next to the HDMI port, so the case is SETTLED.
Thanks again
John
-
How can I clean install windows 98 on a laptop without a floppy drive?
I reformatted but I have my laptop but I don't have a floppy drive to a windows 98 Startup disk. I can do by cd-rom or USB key?
Hello
You can install Windows 98 using a CD ROM
Check out these articles in the KB for help.
How to reinstall Windows 98
http://support.Microsoft.com/kb/250928
How to install Windows 98: suggestions and useful tips
http://support.Microsoft.com/kb/188881Kind regards
Afzal Taher
Microsoft technical support engineer -
I can't install windows xp on my laptop why?
I can, t install windows xp on some portable which was the prob?
I can, t install windows xp on some portable which was the prob?
Please describe your problem in more detail. Tell us what means "I can, t install. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.
-
How am I supposed to install windows 7 on a laptop computer that is not a hard drive
Well, I just got Windows 7 for my laptop, but it's not a hard drive. How do I get there for free?
Hello
· What is the number and the model of the computer?
· Has the operating system installed on the computer it pre-installed?
If the operating system came pre-installed on the computer then you can contact the computer manufacturer if they provide for the free upgrade to Windows 7.
See also the link below which has options on how to install windows 7 on a computer that has no DVD player. Link: Install Windows 7 on a netbook: http://windows.microsoft.com/en-US/windows7/installing-windows-7-on-a-netbook
-
I'm tired of no support for vista and xp or windows 7... any tips?
Hello
Yes, you can use this disk to install Windows XP, if the manufacturer of the computer is the same.
Maybe you are looking for
-
When I select a favorite web page, it will put the web address in the address bar and it works perfectly. Thank you
-
MacBook 08 R2 server connection problem.
I have a MacBook with OS X 10.6.8 I need to connect to a VPN running Server 2008 R2 by using L2TP IPSEC. All credentials and all the settings are in place, but my server still does not work.
-
SE2500 &; E3000 does not connect to another
I had a little wireless switch to a port that I just put in the SE2500. The problem is my audio receiver House and squeezebox will not connect to my network now that I upgraded. The E3000 is not see the SE2500 at all, nor is it see the devices conn
-
K8T57PA #ACJ: recovery
I am tring to make a collection on DVD, but while the 3rd DVD works that he failed twice. It is too late at night and I have more than one DVD in my hand. Recovery, to 5 DVD. Is the beginning of the process where collapsed or early? What should I do?
-
I received this error 252 times according to Event Viewer
This error came from 252 in my event viewer. What is - this, and how to solve? Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could