HP XW6600 workstation: Question to replace ram on HP XW6600 workstation

Similar Questions

• Question of replacement for the hard drive MacBook Pro Late 2008

  Hello

  My MBP HD headed to the exit so I'll take the plunge and get a replacement SSD to install it.  Being not too tech savvie I'm trying to cover all the bases before starting the replacement so I think I'm OK to get to the old and a new one outside.

  I read that a clean install of Mac OS X is recommended.  The plan is to install the new SSD and connect the old HD the MBP for a speaker for the migration of files once the SSD has been formatted and installed operating system.  One of my questions is what OS can / should I install in the first place on the new SSD.  I have the Leopard installation disc that came with the MBP, I also have a Snow Leopard install disc I bought (this is the version 10.6.3).  Start with the Snow Leopard disc or do I have to install Leopard first?  I would get the new OS SSD up to version I'm currently on (10.7.5).

  My other question is around RAM.  As part of the upgrade, I plan to replace and max of RAM, I've seen is now 8 GB between the two slots.  I read what the maximum capacity to 8 as part of an update of the firmware.  So the question is: should I do all updates of OS before installing the RAM?  The MBP would difficult treat 8GB if the firmware update is not installed through the different software updates that will be needed once the OS is installed on the SSD?

  Advice/suggestions appreciated.

  See you soon

  J

  Replace the RAM can be done at any time. If you have already downloaded the firmware required, it has already updated your material and will not be lost when you replace the hard drive. However, according to Apple, your computer can manage only a 4 GB. I could be missing something...

  See here: MacBook Pro (15-inch, Late 2008) - technical data sheet

  As far as your OS issue, the best thing to do is get the updated software to match the information that you are migrating back (to make sure no problem with migration). The best way to do it, is to download recovery disk wizard and install it on an extra USB key. This allows you to install Lion without having to install Leopard or Snow Leopard first. This will also use disk utility to format the new SSD correctly.

  DOWNLOAD: OS X Recovery Disk Wizard v1.0

  How to: OS X: on Recovery Disk Wizard - Apple Support

• How to replace RAM on Tecra M9?

  Hello

  Anyone can help explain how to replace RAM on my Tecra M9L - 12K. Returning more I can see the most obvious place where the RAM would be installed but there is only 1 slot SODIMM here. The other is where and how can I access this? Sorry if this is a thread answered elsewhere, but I can't find the answer - maybe you could move me if this is the case?

  Help gratefully received

  Please download the user manuals of the Toshiba support page under http://eu.computers.toshiba-europe.com > Support and downloads and see page 59. You will find detailed how explanations do.

• Satellite A105-S4074 - Question on mixing RAM

  My phone comes factory with 1 x 512 MB stick with and additional empty slot.

  Here's my Question.
  I bought a stick of 1 GB for the empty slot, so if I always use the computer back to the slower RAM module (512 MB).
  I read on several post its OK to mix, but the computer will always return to the slower size, less for the performance.

  If this is the case it would be better to completely remove the 512 MB stick all together and replace with the 1 GB?
  Let me know your opinion.

  Hi mate

  Usually, you can mix the RAM modules.
  But all the modules will always run at the same speed that is supported by the slower module.

  For example, the 512 MB module supports 533 Mhz.
  Support for 1 GB 667 Mhz RAM
  In this case the 1 GB of RAM will run at 533 Mhz, because the 512 MB supports only this speed.

• Question of replacement HP Pavilion a6333w MoBo system # KC746AA #ABA (ECS MCP61PM-HM)

  I'm working on one of these AM2 Athlon 64 X 2 4800 + (Windows Vista Home Premium with Windows Media
  Critters Center (32 bit)) to a customer (slowdowns, BSOD, boots, hangs / freezes).

  After doing thorough hardware tests (PSU, CPU, RAM and HARD drive are all very well) and make a Visual examination very closer to the MoBo, I found that at least nine of the 1800uf TK 63 caps are slightly 'dished' to the Crown and while he has not failed completely, this isn't only a matter of time, if it fails.

  I came to the inevitable conclusion that it is not worth the time I put in, a lot less time and effort involved in recapping this beast, so I recommend that you replace the MoBo, preferably with an ASUS that can use its RAM, cards and CPU.

  I would like to make a restore of the system since the existing D partition, but makes the question of "HP image restore and sign up OK with a"big"change like MoBO make and model or is"indexed"to an Image type particular MoBo ID?

  NOTE: The customer has lost his recovery CD in a gesture!  Big surprise!

  TIA!

  Hi, if you install a card mother HP no you'll need another copy of windows.

• HP Pavilion x 360-11-n032nw: replacement RAM and HARD drive

  Hello

  I just want to replace

  -HDD at 7200 RPM

  -RAM for 1x8GB

  I can't find any specific info

  -If 8 GB works on this motherboard, or if she is DDR3/DDR3L (eg. L DDR3 KINGSTON 8 GB 1600 MHz CL11 SODIMM PC3-12800 is ok?)

  -where can I find HARD drive for this model adapter

  Could someone help me with this?

  See you soon

  Here is your manual that answers all your questions:

  Manual

  A single module of 8 GB of DDR3L-1600 will work and will downclock at 1333.

  Hard disk hardware Kit, number of spare 755740-001, includes support for hard disk, hard drive connection cable and screws.

  $57 HP kit

  This service model is not very easy and compromise security.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Novice replacement RAM. Can I do this?

  Hi, I've never tampered with any PC before, much less an iMac, but I want to increase the RAM in my iMac 2010 mid - I currently installed 2 x 2 GB strips, and now it is a little on the slow side. It seems pretty easy to make even for a novice like me. Would it not be better to:

  Replace the modules of 2 x 2 GB with 2 x 8 GB modules

  Replace the modules of 2 x 2 GB by 4 x 4 GB modules

  I've read about problems with iMacs does not begin after instillation so I'm a little worried to do this, it should be fine right? Can Apple if something is wrong?

  Thank you.

  Yes you can do it. Apple provides instructions: install the memory in an iMac - Apple Support

  Buy memory from a vendor who housed Macs. OWC / MacSales and Crucial are the only providers I have used and can recommend. Based on the PC vendors often sell RAM that does not meet the specifications of Apple and will not work on a Mac.

  Before you invest money you should first determine if the performance of your Mac is limited by available memory. For information about how to determine that please read use Activity Monitor system memory read and determine the amount of RAM is used (OS X Lion mountain and earlier versions). For later operating systems, please read Using Activity Monitor on your Mac.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Strange question after upgrading RAM on Tecra M10

  Greetings gurus,

  Pleeeaase help...

  I recently upgraded my M10-PTMB1E to 8 GB of RAM of 2 GB.

  My bios sees 8GB, Windows tells me I have 8 GB installed but 3.8 GB usable, it checked with a boot CD. Then, I pulled one of the external 4 GB chips and replace the 2 GB in. Windows detects the 6 GB.

  I tested the RAM with memtest and these two circuits passed (although memtest is only 4 GB)

  I thought it would be a case of updating the BIOS, but if I run the .exe files in 20091103164158-bios, bios-20091104152403 or the bios-20091104172541, I get an error saying "this computer is is not supported.

  Could someone please tell me: -.
  (1) this machine does really take 8 GB
  (2) if so, what changes should I do so that he can use all the 8 GB (unless of course the VGA)
  (3) what the BIOS update do I need

  Thank you for your help

  Hello

  I n t have this model of laptop, but I'll try to help.

  # Yes, this laptop model supports up to 8 GB of RAM
  # Perhaps this document will help you http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
  # In general you don't need to be. Just if you want to you can update the BIOS, but the old one should be OK. Just make sure that you are using compatible RAM modules.

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Why safari does not freeze when I erase a research question and replace it with another search?

  Hello. When I search on Safari, it freezes in the following situation: I have run a search by typing in the search bar. The search results I get, it's not what I wanted, so I erase the question of search and replace it with another question of research. Instead of a new search result that Safari freezes. What is going on?

  IOS 9.2.1 does not run on iMac, as shown in your profile. If you want to help, at the very least, we need to know that the version of Mac OS X installed. If you are not sure, please click on the Apple symbol in the upper left of the screen and select about this Mac.

• Question of replacement HP Pavilion M6 HD

  The HD in my Pavilion M6 is a failure; I want to replace it with something faster. Specifically, I'm looking at the Seagate 1 TB Solid State Hybrid Drive SATA 6 GB/s 64 MB Cache 2.5 ST1000LM014. Will this work for my laptop?

  I have replaced hundreds of hard drives of laptop and these questions are overthinking the issue, but there is no such thing as a bad question so I answer. Your computer has a GB/s SATA-III 6.0 interface. There is no maximum capacity. You can install any player portable SATA not thicker than 9.5 mm market, which I think are now available up to 2 TB. The original drive is 9.5 mm but 7 mm drives have SATA connectors and mounting holes in the same task and will run just below in the caddy. 7 mm discs works perfectly. You are looking at is 9.5 mm same as the original drive. The only problem is with thin ultrabooks which can take only 7mm readers; 9.5 will not match those. And finally, yes you can use an SSD and if you're inclined to spend premium dollars, I highly recommend it, but that you have chosen is a hybrid that is faster than a mechanical drive standard and not much more expensive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite P100-188: Question about upgrade Ram and CPU

  HELO everyone,
  I need a major update so I wanted to know if it is possible to upgrade the processor. I'm already playing Doom 3 ulra high with 4 X Ati and 1024 X 768.
  He sent me some 46 frames per second, with 2 GB ddr 533.

  Then I put the Satellite P100 - 188 T2400 T2500 or T2600 CPU and can I use ddr2 667 mhz Ram?

  Any suggestions how much performance increase if you upgrade hard drive 5400 RPM to 7200 RPM with 8 MB of cache?

  Thank you

  Hello

  The CPU cannot be replaced. But you can expand the memory with the modules:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)

  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  The maximum memory that you can use this camera is 4 GB.

  Good bye

• Question about upgrading RAM on Satellite U400-138

  Hello

  My laptop model is Satellite U400-138, part number: PSU44E-00500JG3

  Technology:
  type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
  Clock speed: 2.26 GHz
  Front Side Bus: 1066 MHz
  level 2: 3 MB cache

  Operating system:
  Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)

  System memory:
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  In intel webside one writes the following on my motherboard laptop specifications:

  "1.2 Intel GM45 Express Chipset supported feature
  All features supported by the Intel PM45 Express Chipset supported by Intel GM45
  Express Chipset unless otherwise stated below. Additional features are listed below. "

  1.2.2 memory system «»
  -Support to 667 MHz DDR3 then FSB 667 MHz isn't that. "

  "1.1 Intel PM45 Express Chipset supported feature
  1.1.2 storage system
  -Support for DDR2 and DDR3 SDRAM
  -Support for DDR2 667 MHz and 800 MHz
  -667, 800, and 1066 MHz DDR3 support
  -One SO-DIMM connector (or memory) per channel
  -Channel memory supported two Configurations
  -Double-channel symmetrical (with Interleaved access)
  -Dual-channel asymmetrical (with or without Intel Flex memory technology)
  -Support for 8 GB of maximum memory
  -scale 64 - bit per channel
  -Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
  -Support for DDR2 and DDR3, x 8 and x 16 devices
  -Support for DDR2/DDR3 termination on chip (ODT)
  -Supported partial written memory using data signals mask (DM)
  -No support for chip quick selection mode
  -No support for ECC
  -No support for operation 1N. "

  http://www.Intel.com/assets/PDF/datasheet/320122.PDF

  The question is...

  I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?

  Respect,
  enteoana

  Hello

  In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
  So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:

  Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
  Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
  Type of module - SO-DIMM

  So if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
  You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.

  If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
  Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).

• Equium A60 - question about replacement OEM DVD - RW

  Hi all

  The DVD - RW in my Equium A60-692 went faulty and reads discs input/output of windows is no longer.
  My Question is: can I replace the drive with any portable computer OEM DVD - RW drive, or should it be replaced with the drive from DVD - RW original it came with?

  Thanks for your time...

  See you soon

  You can replace it with any player, only with a compatible. I have no time to search the list for you and you can do it alone. Check it please s manuals for your model of laptop. Usually, at the beginning, you find a part on information in optical disc players. Should there have listed all the compatible optical disk drives.

  Choose the one that suits.