HPE - 410t unable to boot for win7
HPE - 410t running Windows 7
About a week ago, I was listening to music on iTunes while helping my daughter get ready for her NAP. Without warning, the computer restarted and the window popped up with the option start options "fix." I chose this option. The 'Starting Windows' screen came and stayed for about 5 hours, before decide me that nothing really happening. I pressed the power button and it stopped. I turned the computer back and got an error message:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."
If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is not accessible.
I tried to start the recovery option of the system on the partition recovery using F11. The computer displays "loading windows files" then proceeds to a "starting windows" screen where it remains indefinitely (I have enabled him to spend 12 hours on this screen). I did a win machine windows recovery disc 7 to a friend, who has the same result as the f11. I don't have an installation disc, because HP does not understand.
Any thoughts? I ran the diagnostics and everything tested ok, so I don't think it's a matter, even if her children of seems that way. I also used my Hiren's bootCD to begin his Mini Win XP, and I can access all parts of my hard drive in this way, too, which seems to indicate that the HARD disk itself is correct. It is maybe a problem of record start or something. I would like to run fixmbr and fixboot, but I did find a way to get to a c prompt.
Any ideas would be appreciated.
According to specifications, the HP Pavilion Elite HPE - 410 t CTO desktop PC is about 3 years old. Hard drives are more prone to failures now than in the past. About a year or two is that all the much more recent hard drive will last. Anything in three years and you're really lucky.
For more information regarding the location of the 'SMART Support' in the BIOS option to test the hard drive, see for the Iona motherboard BIOS settings . These tests will be progressively longer;
(1) verification of the SMART State
(2) SMART short self-test
(3) Extended SMART self test (this test can take more than an hour)
You can also download a 'Linux Live CD' or diagnostic software the manufacturer of hard disk bootable CD to test the drive. This should confirm if the drive is bad.
Please see "How to install Windows 7 without the disc" Download Windows 7 SP1, create the Windows installation media and install Windows. You can also use this disc to 'fix' an installation of Windows 7. If you are unsuccessful repair or installation of Windows 7 using this disk, your hard drive is likely bad.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
Tags: HP Desktops
Similar Questions
-
ProBook Crash/unable to Boot by using a recovery disk
The title explains it well enough. My computer crashed after getting the blue screen of death. I was unable to boot after that. I ordered the HP recovery discs. And now I am unable to boot from the recovery disc. I also gave a screen that says device not found Boot please install an operating system on your hard drive. I did the thing any escape goes in the boot, it I also did the F11 thing, nor have borne fruit. If it's important I use a ProBook s 4530 on Win7 64 bit.
Then I ran another test drive, then tried to install windows again, it worked. You'll love PCs. thanks for your help.
-
24 b017c: 24 - b017c dual boot with Win7 possible?
The b017c is capable of running WIN7 pro in anyway shape?
I really need to do a system dual boot with WIN7 If Yes. WIN10 is not be nice to some specific software Attorney that I need to have to work for a client. Win7 is the latest OS, this software is compatible with before an upgrade of expensive software can't be compatible with Win8 or higher (we're talking $1000-2000 range).
I tried to install WIN7 on this computer after the partitioning of the disk space, and put out several settings in the bios (I had error btw), but WIN7 keeps hanging in the first screen after loading the drivers (language selection screen). Something happens where ports USB closing killing all connections to the mouse and keyboard. I have tried many changes in the bios settings and a retry of the WIN7 Installer (from an installation disc) but no dice.
Is there a certain combination of settings that must be disabled in the bios to get the win7 Installer right or I'm screwed?
Thanks for any help
What an adventure!
As you discovered, you must completely format the drive as one or the other (GPT or MBR). You cannot format a GPT partition and the other in the MBR.
I wonder if you had back and disabled the legacy mode, if W7 would let you install on the GPT - or partition if the disabling legacy mode would also have permitted secure boot.
In any case, it's water under the bridge.
Drivers... Here are some that may work...
First install the driver from the Intel chipset and restart the PC. A 2nd on the left is the automatic installation file.
See if this graphics driver works... 3rd one down on the left is the automatic installation file.
Audio: Accept the agreement. Download and install the 2nd driver on the list.
Ethernet: Download, unzip and install the 2nd driver on the list.
Card reader: download, unzip and install the driver from the 1st on the list.
Wireless: 2nd pilot down on the left.
Bluetooth: 2nd one down on the left.
-
Satellite P100-347: blue screen at startup - unable to boot volume
Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.
During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).
I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.
Can I do other than take it to a technician?
Hello
Well, for the most part the BSOD appears due to hardware problem or serious software.
In your case, the software problem is possibleUnfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD diskI think, now, you know that regular backups are important and necessary!
-
Decommissioning of Pavilion 15-n287cl for Win7
Wife got a new Pavilion TouchSmart 15-n287cl and she hated Windows 8. I told him that I him downgrade to 7 after she has spent some time with her and hated 8... disabled Smart Boot, got Win7 installed just fine. Starts in 7 for the first time and I tried to install the drivers from the disk and a bootable USB key and got said that none of the drivers would work. Curious, because I've never had problems in the past. I went to the HP site and saw the drivers for my product:
Nothing of value is listed in the Windows 7 options. Did someone had a similar experience in decommissioning/when trying to find the Win7 drivers on a computer that is preinstalled with Win8?
Hello:
Give these a try...
First, you must install the AMD chipset driver and restart.
You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
Graphic design is the fun part. You can first try running AMD beta driver to the latest version from the link below and maybe it will install the drivers if no, then let me know and I'll give you another method to install it using this driver.
http://support.AMD.com/en-us/download/mobile?OS=Windows 7-64
Audio: Accept the agreement. Download and install the second on the list.
Ethernet: Install the second on the list.
Wireless:
USB 3.0: Installing these drivers...
Card reader:
Webcam:
ProtectSmart:
-
HP ProBook 4520 s - dual boot between Win7 64 bit and Ubuntu 10
Hello
I just got my new HP ProBook 4520 s a few days ago and:
(1) there were 32 bit Windows7 professional pre-installed / pre-loaded
(2) it comes with the TWO 32-bit and 64-bit Windows7 professional DVD HP (I guess versions OEM HP)
(3) the HD have 4 partitions in the following order
score A 3 a) named SYSTEM
3 (b) the parition where Win7 is installed
(3 c) HP_RECOVERY partition
partition HP_TOOLS 3D)
I did a lot of dual-boot in the past years, but my question is really related to maintain the HP diagnostic tools that arise before even that any operating system is loaded... and diagnostic tools are those of the HP_TOOLS partition. For example, when I ran some diagnostic tests, after completing the tests and the boot of Win7, I see in the HP_TOOLS partition, in one of its directories, a .log file recently updated with the results of diagnostic tests. I want to assure you that I can still run powered on the laptop even after dual-boot diagnostic tools.
Now, since I have the DVD 32 - bit and 64 - bit, I decided I want to dual-boot between Linux and 64 bit Windows7 professional. So here's what I've done so far:
(A) has reduced the volume of Win7 Windows computer management disk management
(B) install Win7 64 bit on top of the existing 32-bit Win7 partition, format this partition during the installation. So no more HP utility and on the installation of 64-bit programs.
So now I have Win7 64 bit installed and professional pre-activated since it's the same notebook. Then, I realized that I really need to delete the HP_RECOVERY partition since you can have up to 4 primary partitions. So by deleting the HP_RECOVERY partition, I will be left with 3 primary partition, then I can create an extended partition to contain other partitions for Ubuntu, etc...
But before I delete the HP_RECOVERY partition, I want to know:
*) When starting, before even that any operating system is loaded, HP you shows options like "Diagnostics" and "recovery". How is the computer HP laptop knows that diagnoses are in the HP_TOOLS partition? How the laptop HP ProBook 4520 s knows that recovery is in the HP_RECOVERY partition?
*) Since I have the DVD of Win7 HP (32-bit and 64-bit), I don't really have the HP_RECOVERY partition. If I delete the partition, what will happen to this start screen which gives you the possibility of "recovery"? Of course the recovery option won "t work and I don't like, but will remove the partition HP_RECOVERY won't let me boot into Win7, or any OS besides? for example it does not validate there HP_RECOVERY partition to a place before loading Win7?
*) Then, I want to install Ubuntu, and preferably Ubuntu (or Grub also) overwrites the MBR. I prefer Grub on EasyBCD. I can easily change the configuration of grub so I can dual-boot with Windows7... But again, my question is, where does HP maintains information about diagnostic tools that they are in the HP_TOOLS partition, like the option of the diagnostic tool loading via BIOS before even any OS is loaded. Is that information in the MBR, or is it in the partition named SYSTEM?
Summary of the questions are therefore:
(1) where HP keeps its information that diagnostic tools are in the HP_TOOLS partition? It is in the MBR, or the SYSTEM partition, or is it stored in the BIOS hard coded to load more precisely from the location of the partition? I want to keep the ability to run Diagnostics even after you have a dual-boot installation with grub in the MBR.
(2) deleting the HP_RECOVERY partition will prevent the workbook from loading correctly before moving to Win7, Ubuntu or any other OS?
Just find the answer to my original question:
He uses the EFI interface and seeks a partition named HP_TOOLS, which means overwrite the MBR will not affect the operation of the HP diagnostic tools.
-
I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?
original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM
If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:
1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.
2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.
3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.
-
STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.
Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please
Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.
Solution:
1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.
2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)
3. type: BATCH spuninst.txt
4. type: exit
Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.
-Tom Steele
http://www.hawkandtom.com Tom Steele -
Windows recovery disc 32-bit error code meaning version question
Hello
I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?You don't give any info on what was the original problem with the computer.
You have set the Bios Setup to boot from the CD/DVD drive?
At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.
And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?
Use up arrow key to do this, press on enter.
Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.
See you soon.
Mick Murphy - Microsoft partner
-
Upgrade - unable to boot (probably error classpnp.sys) RAM
Hi all
I have an acer aspire 5742G with windows 7 Home premium Edition and 3 GB of RAM.
I bought a Corsair Valueselect 2 x 4 GB RAM together. When I replaced the original/3 GB with the corsair, I was unable to boot windows.
Problem mentioned here: http://www.tomshardware.co.uk/answers/id-1888966/windows-boot-memory-upgrade.html
Basically, I get an infinite loop of "unable to start Windows. A recent hardware or software change might be the reason for this... »
1 start windows normally
2 start windows in recovery
These two options are responsible and we're back to the same loop.
After trying to boot into SafeMode (via F8), I could see the start-up hung at classpnp.sys
I put the original RAM dos and windows started without any problems.
Googling has revealed that this problem was already previously, but no solution has been put forward except: put the old memory.
(http://forum.crucial.com/t5/Standard-DRAM-Memory/Windows-7-boot-failure-after-memory-upgrade/td-p/129972)
I've updated BIO to the latest version, BIOS recognizes the 8 GB (in original and updated updated version).
Any ideas / suggestions are welcome.
Kind regards
Update and closing:
I went to the shop of pc and we tried the RAM from another manufacturer, ICUDU (2 x 4 GB 1333) and the pc started without any problems. I'm surprised that the manufacturer of the RAM has this impact it could work or not.
I hope that this problem is not encountered by others, it was quite an experience.
However, my conclusions are added below. As I mentioned in the first post, the problem has been experienced before and the 'solution' was a status quo, do not level. This experience taught me that not all RAM is created also. Even the best-known brands may be sometimes inconsistent.
Summary:
Upgrade of RAM 8 GB on an Acer aspire 5742G with i3 - 370 M processor:
Upgrade memory ICUDU (2x4gb) Kit works,
ValueRAM Corsair (2x4gb) - sorry to say - did not work.
Kind regards
-
Hey guys
I need help, in my company trying to learn switches I flashed my switch all :(
I now get this error
The system is unable to boot automatically. The BOOT
environment variable must be set with a bootable
image.I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only
switch: dir flash:
Directory of flash: /.3 - rwx 269
env_vars 7739904 bytes available (1536 bytes used)
switch: start
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...
switch: start
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...
switch:C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
Updated Tuesday 22 July 02 17:18 by antonino
WS-C2950-24 from...
Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
XMODEM file system is available.
Initializing the Flash...
flashfs [0]: 1 files, directories 1
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 7741440
flashfs [0]: used bytes: 1536
flashfs [0]: available bytes: 7739904
flashfs [0]: fsck flashfs takes 4 seconds.
.. .done boot flash.
Boot sector file system (bs :) installed, isfd: 3)
Setting Filesystem block (pb :) installed, isfd: 4)
Loading ""...: permission denied ".Error loading «»
Interrupt within 5 seconds to cancel the startup process.
Boot process failed...The system is unable to boot automatically. The BOOT
environment variable must be set with a bootable
image.switch:
switch:
switch: flash
Initializing the Flash...
... The flash is already initialized.
switch: dir /.
Unknown cmd: dir /.
switch: dirList of currently registered file systems:
Flash [0]: (reading / writing)
XMODEM [1]: (read-only)
NULL [2]: (reading / writing)
BS [3]: (read-only)switch: 0
Unknown cmd: 0
switch: flash_init
switch: load_helper
switch: dir flash:
Directory of flash: /.2 - rwx 269
env_vars 7739904 bytes available (1536 bytes used)
switch:Hello
It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.
Thank you
Garrett
-
HI, I have vm with 2008r2, want to format it, I've attached the os image, but am unable to boot form cd, whenever vm restarts it's hard drive startup form
Hi, open vm definition go options tab--> select option to start the list and check mark the setup of Bios of the Force.
WHT he will, it will enter in the setup of the BIOS of the virtual machine at the next startup. In the BIOS configuration, you need to focus on 1 CD/DVD boot rom drive. now, save the bios and restart the virtual machine. you are finished.
Now it will boot the CD or DVD what ISO image for evever etc.
-
Alienware X 51 R1 unable to boot from the CD
I've noticed lately that my x-51 R1 running Windows 7, is unable to boot from the CD/DVD drive using the UEFI. I tried with a CD of Linux for the class, and I'm trying to reset my HP MediaSmart Server old ancestors via a disk recovery and in two attempts, the computer will boot directly from the HARD drive.
Installation boot is CD/DVD, USB, CD/DVD or HARD drive.
UEFI BIOS is
Computer is running that Windows 7 Home Premium, Intel i3-2120 3.3 GHz bought in December 2012.
Any help would be appreciated, I will try to answer all questions as well.
Calling Customer Service would be good, but they try to charge me...
The UEFI boot sequence does not take too kindly to optical drives. It is best to make a USB bootable using Rufus:
For an example, see here:
If you make a recovery media using the latest version of Respawn Alienware be sure to use USB (USB key or external hard drive USB) and not a DVD media:
http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/
-
I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not occur.
Please help on this issue.
Since there is no integration PAM for ESXi, you cannot authenticate to ESXi itself using active directory. -What are you talking about? You can always have virtual machine with windows and active directory.
-KjB
VMware vExpert
-
Find the Audio driver for HP dc7600 convertible minitowers PC for Win7
Dear all Member,
I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.
Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.
You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?
Thank you very much.
Chinh_Ng.
Hello:
For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.
Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.
I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.
I used the one on the link below.
Maybe you are looking for
-
I can't turn off the sound of the camera.
even if I turn on mute, his camera is always strong. Mr. have an iPhone 5
-
migration wizard to set up the new mac
Did a time machine at the top on an old mac and want to transfer only files in my documents folder, but not the Apps on a new machine. Two use of machines, OS ElCapitan which of the three options I have need to select Migration Wizard to minimize tra
-
App Store is muestra pero so to load.
El App Store to me carga, pero no lo muestra, porque puedo buscar una application, por internet y open el el link me what leads has the App Store y me carga perfectly. Pero cuando abro app como usually not self me carga. I have an iPad 2 Air con iOS
-
Upgrade hard drive hybrid on m7-1015dx
I want to spend my hard drive on my laptop 1015dx m7. Installing the new hard drive and try to install windows, I get the error saying "Windows Setup could not configure windows to run on the hardware in the computer." According to me, the issue is t
-
I accidentally deleted C:\ drive during the installation of windows xp
I have Intel Pentium 4It's a desktop PC2.80 GHz512 MB RAMA week ago, when I turned on the PC, I saw the message "DISK BOOT FAILURE", INSERT SYSTEM DISK AND press ENTERI inserted the Windows xp Sp2 disk and press enterIt load files, has agreed to the