Upgrade - unable to boot (probably error classpnp.sys) RAM

Similar Questions

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s

• Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.

  Last month, I had a series of blue screens.  The problem points to the files Volsnap.sys or Classpnp.sys.

  I have a Dell Precision T3500, running 64-bit Windows 7 Prof.  The system is configured with RAID.

  Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that.  It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.

  No idea on how to stop this would be really appreciated!  Thank you

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  TrendMicro is most likely part of this question, as it is known to have caused or
  make these problems worse. Uninstall it and run the removal tool to prevent
  remains of troublecausing. The following recommendations to use during the test,
  even better all the time.

  TrendMicro removal tool
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ==========================================================

  The Bug_Checks were D1 (19 long happened if he should really
  do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
  Components of Windows, which means something else led in error.

  1. Uninstall TrendMicro as it has a role - is not enough to just disable
  such that it will still load chunks of itself in memory.

  2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
  or other corruption could be at stake. Classpnp.sys is the SCSI class system
  dll checking and disk problems will affect the it. Run SFC/scannow, and then
  Checkdisk (chkdsk /f r).

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =========================================================

  Other troubleshooting methods:

  BCCode: D1 0x000000D1

  Check these KB

  Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
  from sleep or standby extended: "STOP: 0x000000D1".
  http://support.Microsoft.com/kb/978982

  Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
  system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
  http://support.Microsoft.com/kb/2320550

  Those 7 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  --------------------------------------------------

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop hangs at startup - (stop classpnp.sys)

  I have a laptop of 8943 G old Acer of 10 week who couldn't start about 2 weeks after the purchase, the problem solved startup repair, but he returns a week later. This question is the same as that experienced other users in that, once trying to boot in safe mode, the system stops at classpnp.sys. Now, nothing less than a full factory reset solves the problem, but he returned in a few days to a few weeks.

  Here are the repair startup error report:

  Problem event name: repair startup in offline mode
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the problem 4:-1
  Signature problem 5: Autofailover
  Signature of the problem 6:4
  Signature of the problem 7: corrupt and registry
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  Here is what I tried already solve the problem, such as recommended by other users with this issue:

  Reset factoy - problem returns.
  Disable write-behind caching on all drives - runs very slowly and finally does not start.
  Pass BIOS sata AHCI mode on IDE - blue screen on startup.
  Update all the drivers of devices - no effect.
  BIOS update - no effect

  I am at a loss to know what to do then short it to try to get a new card mother or HARD drive. Any ideas would be appreciated as much info as to whether a new HDD or MB would help or not. The laptop is still under warranty Acer so this isn't a problem.

  Thanks in advance.

  Hello

  You need to work with the support of Acer. Do more you the more they tell you it's something
  you did it. Added that the issue should be documented if there is down the road issues.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -------------------------------------------------------------------------------------------------------------------

  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
  boot order to CD/DVD to use disks of Vista. Be sure to set in when.

  With a Windows 7 disc or try Startup Repair - repair (possible patches are the same as these well)
  the titles are named differently.)

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  It's not your mistake, but the difficulty might work.

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ==========================================

  These "help":

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  SFC/scannow
  Press enter

  and after that runs away

  Chkdsk /f /r
  Press enter

  (Spaces between C and / k and / and f and /)

  Retry After Chkdsk startup repair.

  If after those you can try the system restore from the recovery or Windows 7 disk.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Or from the command prompt:

  C:\Windows\System32\rstrui.exe

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• kernel data inpage error spaceport sys

  Hey

  I just got a new pc, and whenever I stopped and it starts up again, I get an error: kernel data inpage error spaceport sys

  and the computer just start windows normally.

  What to do / how to fix it?

  Good morning Martine.

  For more information, see the error below:

  -+------------------------------------------------------------------------------------------------------------------

  7 has error checking, {fffff6fc40009b08, ffffffffc0000185, 1 c 2042860, fffff880013617ec}

  GetPointerFromAddress: unable to read from fffff80151b76170
  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  Follow-up: memory_corruption
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc40009b08, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc0000185, error state (state code of e/s normally)
  Arg3: 00000001c 2042860, the current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff880013617ec, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc0000185 - peripheral of e/s reported an IO error.

  -+------------------------------------------------------------------------------------------------------------------

  It seems that you have a bad hard drive or RAM module in your new system (ran 6 hollow landfill WinDBG), since it is a new system, I would bring her to the store you bought and let replace it.

  Read this guide on how to test your RAM Modules: http://www.pcadvisor.co.uk/how-to/pc-upgrades/3432631/how-check-for-bad-ram-modules-in-your-pc/

  Read this guide on how to test your hard drive: http://pcsupport.about.com/od/toolsofthetrade/tp/tophddiag.htm

  Personally, I'd suggest to return the computer to the store and allow them to correct the problem, apparently not driver related to me (especially if you updated all..), it seems that you have a malfunction of the equipment.

  You can try and run CHKDISK (http://windows8themes.org/how-to-run-chkdsk-in-windows-8.html), but I suggest you RMA your system and let check the RAM and hard drive.

  If however, you want to ensure that it is not Windows, then reinstall Windows and see if the problems come back, but I bet they will be.

  I know this answer might not be what you want... but...

  Yuri

• BlackBerry Z10 unable to boot my BB Z10

  Hello

  Several times Z10 unable to boot after restart of my BB, I removed the battery and switch on
  It shows only the process of loading with logo and off.

  Help, please.

  Concerning

  Follow the instructions in this thread:

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  You'll need to know the specific model your Z10 is... probably the Z10 STL100-1 model of you bought this unit through Airtel.

• Master boot record error

  My HP PAVILION desktop w5050 BE, necessary maintenance, apparently due to a virus problem (screen user shows no icons or ACS bar).

  I also tried to make an image of c:, which always failed on "cannot read disc" on some points.

  Then the pc cannot load windows.

  I made a recovery from disk recovery, made on this pc.

  Now, it goes as follows:

  1 HP Invent screen

  2 black screen by wite concerns underscore.

  02:03 minutes 'Master Boot Record Error - press any key'

  4 windows start normally.

  How can I get the normal starting procedure again? I read about a feature of "fixmbr" on the recovery console, but it does not appear to exist on my machine.

  Thanks for the help!

  Hello

  According to what you have posted, it seems to me that the problem is hardware related.

  the value 7 (realized with the elemnt of the test reading has failed).

  Your drive HARD is not OK and would probably fail soon. It may need to be modified or replaced

  I suggest that to contact the Service Center authorized HP closest. If you don't know where it is located, please contact HP for more information:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  or

  http://WWW8.HP.com/us/en/store-Finder/find.do?BS=SR4&type=authorized

• ERROR 1904WINDOW, SYS, WOW64, ACTSKN43. OCX.

  When you try to download a program for online t.vv I get an error message: ERROR 1904WINDOWS, SYS, WOW64, ACTSKN43. OCX.  Then I continue the installation and click the icon I get an error message: Runtime Error 339 actskn43.ocx.  Can you help me

  It SAYS it works with any version of Windows, but it does not detail these versions (and I doubt that this is really true - probably, this does not work on versions really old and they may not be thought to test for 64 bit systems).  I went on the site and test it myself but I don't have a 64 bit system (and I won't buy the package).  It is not in the http://www.microsoft.com/windows/compatibility/Search.aspx?type=Software&s=watch-football-now&page=1 Vista Compatibility Center, which simply means that it has not been tested - not that it is certainly not compatible (even if it is often the case - but he has worked on the PC of your daughter, so that we know it is compatible with Vista 32 = bit at least).

  I didn't Kow what else to try.  Perhaps shoule you post your question in the pictures and video forum (with a link to this topic) and see if someone there can help you.  Here is the link: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Laptop hangs at Classpnp.sys file.

  So I installed Windows 7 the other night on my laptop.  I did the driver updates and installed Norton.  Also, I installed Office 2007.  Then I stopped it for the night.  The next day, I turned it back to install more than a few things.  A friend recommended that I have installed Ad-Aware, so I did and it ran.  I used it on some of my machines before without any problem.  I installed a couple more programs (SANDRA & CPU - ID), and then I stopped it for the night.  He got away.  I don't think anything, and after about 20 minutes, I did the strength.  I started up the next day and now it hangs at the windows startup screen.  I have tried the following to all the same results:

  -Repair System - hangs at the screen repair
  -Start normally - hangs at the windows startup screen
  -Start in safe mode - crashes the classpnp.sys file
  -Start in SafeMode with command prompt - crashes the classpnp.sys file
  -start in SafeMode with network - crashes the classpnp.sys file

  I even tried to put in the windows 7 disc to do a re-install and it hangs at the windows startup screen.

  It seems that no matter what I try I lift the block to the windows splash screen.

  Someone help please!

  So the other night, with that I tried a few more things all the same results.  Here is what I tried:

  -J' bought a second GB of ram, so I tried exchanging a stick, and then another - same results.
  -J' have bought a box hard drive, removed the formatted hard drive with another computer, ensured that I could save things he re-installed hard drive, booted from the CD - same results.
  -J' I bought a new hard drive, installed, booted from the CD - same results.
  -Replace the old hard drive with the 2 sticks of RAM - same results.

  After reviewing a number of things, I found that when Windows gets to "Starting Windows" screen, it checks your hardware to make sure that things are OK.  Well, my hard disk, RAM, CD player and video card are OK (I get all the right stuff video), so there are only a few things left, and one is the motherboard.  So, I think that there is a hardware problem which does not Win7 load completely.

• Loads of Boot Up Error Messages: "CLR error: 80004005 ',"the program can't start because LPK.dll is missing on your computer.

  I get a number of error messages when I try to start my Windows 7.  Initially, I just got a black screen or a screen frozen at the point of "Welcome".  I was unable to boot into safe mode and the only options were 'valuation' or 'normally', which none worked.  I was finally able to start in safe mode.  It is a VERY slow process, and once it finally loaded, I get 3 error messages.  It was noted that "the program cannot start because LPK.dll is missing on your computer.  I got the message "GfxUI has stopped working" as a "CLR error: 80004005".»  Once I click OK on all this, windows Explorer tries to restart and stop eventually.  I tried to find solutions, but it seems that I can't in the control panel to check the settings.  Although I can click on the Start button and I don't see the control panel option, it will not be open.  How to solve this problem would be greatly appreciated it's super frustrating!

  If you have a real win7 dvd, you can try to boot from this dvd and run a repair (disconnect external devices first)

  If you don't have that a recovery of certain system-makers, depends on its options on the question of whether you can fix or do a destructive restore (the latter will destroy everything on the disc)

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• Crash blue screen with error 1gdpmd64.sys

  I have a Pavilion dv7-6b78us laptop.  He started to crash to a blue screen with an error 1gdpmd64.sys.  I tried just reboot and it hangs just still a little later after use.  I searched the web and found a site that recommended upgrading the graphics drivers and chipset.  I did and it still broke to blue screen after a short use.

  I decided to do a system restore then after performing a backup.  The restoration went well past (disk formatted and reinstalled to restore a minimum of software.)  I then reinstalled all the upgrades of Microsoft (with the exception of IE 11) and then installed Norton Security Suite.  I then installed Microsoft Office & Student 2007.

  I fell for the same system error blue screen again.  Is it time to tight teeth and get a new hard drive?

  Thank you.

  Finally, I did a restore to the factory settings that formats the c: / partition and reinstall the PC to factory settings and original software.  I then reinstalling all other software.  So far so good.  I did most of the upgrade of Microsoft (there are more than 130 of them) and that is brought back up to 10.  However, I see there are updates more that need to be installed, so maybe I have have not yet hit bad.  I think I'll install the rest one at a time and see what happens.  Perhaps in this way I know that we're causing problems.

  Have you tried upgrading your graphics and chipset drivers?

• Unable to boot computer after several attempts

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.  Recently, I was unable to boot my computer.  I restored to factory settings, updated it, restored to an earlier point, and now it does nothing.  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  Sunday, September 14, 2014 00:51:23 + 0000, BK_81 wrote:

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.

  Almost certainly, it came with none. Instead it came with a recovery
  partition.

  Recently, I was unable to boot my computer.  I restored to factory settings.

  Using the recovery partition?

  refreshed, restored to an earlier point, and now it does nothing.

  Unless you are having a hardware problem, you probably screwed
  something in these steps upward. Exactly what you were doing and how?

  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.

  That looks a lot like a hardware problem. Maybe overheating.
  supply failure, hard drive, motherboard, RAM or something else.

  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  He must still be under warranty, and you should probably get Dell to
  see what is the problem.

• error message "sys Page_Fault_in_nonpaged_Area_win32".

  Error message "sys Page_Fault_in_nonpaged_Area_win32".

  My machine runs 8 win and this message appeared and restarted my pc.

  Recently I downloaded a zip file and in the background the Win Upgrade Wizard 8.1 revolved too.

  the zip file has been one. Exe and I think it may be the reason or any other reason, because this way let me know.

  Please let me know how to avoid the problem in the future.

  I still believe win 8 OS for its finesse

  Thank you

  I make a new thread for the problem of update and mark my answer as answered because your original crash problem is resolved.

  Kind regards

  Patrick