HPE 590 t: replace a drive hard raid 0

Similar Questions

• Why can't replace my drive hard hp compaq 6200SFF 250gig with the largest disk

  I think I posted this in the wrong section earlier.   I want to replace my drive hard HP Compaq 6200SFF with a larger 250gig. I've done it before with other computers with no problems. I bought a 500gig drive at a local store and makes a picture of Symantec Ghost (option was image-boot) to my 250gig drive.    Then I installed the drive and started again with my ghost drive.  Normally I just launch the function of disk image restore to restore the image of the old drive to the new drive.  When I tried to do with the 6200, very well restored ghost image but as soon as I start on the new drive, I get an error message saying that "windows does not stop normally.   I never get to see the Windows Startup logo and welcome screen or something else than this black screen with white letters.  Windows did end normally when I was last using the 250 GB drive and it will power off.  I can't get the restart to go further - I just get the same error screen - there is no options or choice - all said the message is to call your service representative.  Is there something special about 6200 readers?  Do you need to do something instead of or in addition to making a ghost image?  Is it something in the bios that should reset itself?

  Thank you, Hanspuppa.  I think you have a more recent version of Acronis, I ghost.  However, I was able to solve my problem using the Windows repair disk.  I ghost a disk image (ghost - ib) of my drive hard old man and then did a ' local disk image - of ' put the image on my new drive.  I received the repetitive message "Windows 7 does not normally" but then inserted the windows repair disk and booted from it.  He finds that the boot image on the new drive was bad and repaired.  He did not cela easily - reboot/turn off many times before the finished repair disk, I had and the pc booted from the new hard drive properly.  Now, I can do this with windows 7 and the emulation of hard drive has been to AHCI.  Knit a friend and I tried to do this on an another HP6200 with an image of Windows XP. We did not have a handy XP repair disk, but we went in the settings of the bios under storage on disk and passed the SATA AHCI to IDE emulation.  When we restarted Windows message here once, we supported on enter and him went pc to boot normally.  So the problem revolved around the difference in the AHCI IDE and the boot image created by Ghost.

• Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

  You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

  # 11. https://forums.Adobe.com/thread/1714695

  If this isn't what you want to do, you have to reinstall.

  Gene

• Replacing a drive in RAID 5 PERC 5i

  Hello, I have a RAID 5 with three disks 10 k and a 15 k. I would replace the drive k 15 with a supplement of 10 k drive, so that I can use the drive k 15 on a different server.

  What is the best way to do it?

  Thank you

  Ken

  Force the 15K drive offline, remove, insert the replacement. If the 10 K drive is not automatically rebuild, assigned as a hot spare. If the player is "foreign", you must first CLEAR the foreign configuration before you can assign it as a hot spare. Remove and insert the drive should be made WARM (while the system is running).

• Replacing the drive HARD on Portege R700

  Hello

  I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.
  Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?
  What size hard disk will - 2.5 "or 1.8"?
  A SSD will be simply connect using existing connections, or something else there?

  See you soon.

  According to the specifications of the laptop Portege R700 has 2.5 HARD drive is HDD with SATA interface, so I think that you should order 2.5 SSD with standard SATA connectors.

  HARD drive is placed on the bottom side near the cooling vent and it is fixed with a screw only.

  Remove the screws and HARD drive. You will see how the HARD disc is placed and how it must be removed.
  It's very simple and you can do it alone.

• Replacing the drive HARD Satellite Pro 4280

  I have a SP 4280 and the original hard drive on it does not have earlier. I bought a Hitachi Travelstar 5K 100 40 GB replacement, but I can't seem to make it work. FDisk recognizes the disc as a 40 GB drive and seems to format the drive. However, attempts to write anything to generate results in an error message "invalid media".

  Installation using XP Pro format the drive gives me an error message in the sense of "Windows cannot format the drive.

  I have attached the drive to my PC via a cable of adapter 2.5 "and it seems to work fine. I also use the latest version of the BIOS on my laptop. It is not the settings of 'cable' rider select and 0/1 on the drive.

  Someone knows what the problem is, or that I couldn't do or have suggestions to raise my drive and running?

  Cheers in advance

  Hello

  Your device was shipped with a 6 GB HARD drive.
  In my opinion, the BIOS has a few problems with the recognition of the HARD drive because of the large size of HARD drive. Unfortunately, I put t see any possibility to solve the problem.

• Replacing the drive HARD on Satellite C850

  I found this Toshiba on Youtube video that shows how to replace the hard drive on the C850.
  http://www.YouTube.com/watch?v=0550V-181d0

  It helped me a lot, because there is NO entry in the user manual on how to replace it and where the hard drive can be placed.

  They show you where is the memory, but not where is the hard drive. WTF? so, this video tells you it's in the same slot for memory.

  Hello

  Yes, I also noticed that not all information can be found in single user manuals.
  However, there are many other sources to find essential details.

  Toshiba Europe youtube channel seems to offer a lot of useful videos to replace the HARD drive, memory or a drive CD/DVD in the different laptop models.
  http://www.YouTube.com/user/toshibaeuropesupport

• Replacing the drive HARD on Satellite C series

  Hello

  I want to replace and upgrade my hard drive internal sata, what is the maximum size that I can install which will fortunately be recognized by BIOS / chipset?

  Hello

  SATA controller isn't limited to a specific size of the HARD drive.
  Generally, you can use 2.5 SATA HDD support any size (250 GB, 500 GB, etc.)

  But have you considered using a SSD drive? I prefer SSD drive, even if these discs are more expensive. The performance is much better and believe me; the performance gain will be noticeable.

• Replacing the drive HARD on Portege R400

  HI people,

  Can someone point me to a disk for the R400 replcacement? Those listed on www.topazsupport.co.uk is horribly too expensive, of course, I'm looking for a drive 1.8 "standard that fits this model.
  I noticed that the current HARD disk has a female connector while the disks hard most seem to have a male (I say "appear" because nobody seems to actually have real pictures of their readers for me to know)!

  Thank you

  Ferg.

  According to specification for laptop, your laptop has 80 GB 1.8 inch PATA HDD.

  To be honest I don't know what to do, you mean with standard HARD disk. The fact is that you must use compatible HARD drive for your laptop model. According to the specifications of the laptop, you can use disk TOUGH MK8007GAH. In my opinion, you need replace HD with the same model. So you can be sure that everything will be OK. I think also a capacity of 80 GB is sufficient.

  I found nice pictures for you:
  Here is the image of HARD drive
  Here you can see connectors

  At the end, I must say that replacement of HARD drive seems easy but these hard drives 1.8 are more sensitive and pressure on the wrong spot can damage the HARD drive and data may be lost.

  Do you want to replace one?

• Replacing a drive HARD on Satellite L40

  All greetings!

  Replacing a hard drive! Greetings broke a hard drive, before there are clicks.

  There is a 120GB, 250GB hard drive in my laptop Satellite L40, I put.

  Operating system has created an applied Toshiba drive. Activation of Vista has not required. But she sees the volume of a 130GB disk where got more 120 GB?

  Your offers. Probably to fix this?

  Thank you

  Hello!

  First of all, what Satellite L40 do you have exactly?

  The BIOS recognize the 250 GB or only 120 GB under Windows?
  Check if you have the latest version of the BIOS.

  Maybe the Satellite L40 does not support hard drives of 250 GB, but in the user manual, you can find more information.

  Good bye

• Replacing the drive HARD on Equium M50-216

  Hello

  I'm looking into upgrading the hard drive in my M50-216, which currently has a MK4026GAX. The player that I am most interested is the MK8032GAX. Is this a suitable replacement, that is going to work?

  A few questions:

  1. I guess it's just a case of withdrawal of the current drive, mortising the new one and start using my Toshiba restore CD? This will reinstall the Norton junk as well?

  2. assuming I have remove the current without shape, i.e. I leave it as it is, I suppose that if I find the new drive does not work I'll be able to put the former back in and it will start like nothing happened? I'm not changing any other material.

  3. it will work as a trolley suitable for the old disk: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=414030

  4. the most important question will be affecting my current standard warranty, or assign an extension of warranty if I choose to buy a more this year?

  Thank you
  Baillie

  Old disk HARD 40 GB MK4026GAX
  New disk HARD 80 GB MK8032GAX

  The BIOS should recognize up to 100 GB HARD drive

  1.) Yes it should market. Also, it should be possible to install Norton ghost image files
  2.) Yes, it should be possible to put the old HDD and start the laptop.
  (3.) if the new HARD drive supports the IDE interface, it should be possible to use it in the external USB case
  4.) No, the upgrade of the HARD drive should t has no effect on the guarantee

• Replacing the drive HARD - Am I was scammed?

  Hello

  My HARD drive has failed on me (error 301). Bought a new WD Scorpio Blue 500 GB and gave it to an official HP Service Center for the recovery of the system. I currently live in Jakarta, Indonesia. Engineers then told me that they could not install/do the system recovery because I bought the laptop in the United States. Different region, they say, and the best they could do was just to install a clean Win 7 home.

  But a few days later they told me that they could not yet install Win 7, and my new WD HDD was damaged. They said that they have tried with their HARD disk, which is the same brand as the original HDD (Toshiba) supplied with the notebook. Gave me a quote for 3 million rupees (US $$317) for HARD drive not including service fees with an inexplicable discount of 1 Million rupees (US $$126). I refused and asked my laptop back. And when I turned it on, it was on the last step of the installation of Win 7 (PC name enter, password, cd key, etc...). The laptop works fine now, just, without the recovery partition. I ordered a HP.com recovery kit but it'll take a while to get here.

  Is it normal for a Service official HP Center replace a HARD drive for more than $200 USD?

  The recovery kit works on a WD Scorpio Blue 500 GB HARD drive?

  HP Pavilion dm4-1265dx.

  2 years - no guarantee

  Concerning

  Generally, the price HP or service provider will charge you for an item is much higher than in the retail channel. Also, a Service Center HP 'official' need not be owned and operated by HP... This could be a third-party provider approved by HP. And Yes, there are many questions for obtaining maintenance work in another region when the computer has been sold.

  You need to create your own personal when HP recovery disk you first set up your computer. This should have resolved most of your questions. Here are the specifications of your laptop HP Pavilion dm4-1265dx Entertainment. According to specifications, your original computer hard drive was 640 GB. A 500 GB drive should work with the HP recovery discs but noted problems with it installing to a drive that is smaller than the factory.

• my hp 5550 printer is not printing from a connection direct mac after replacing the drive hard * bleep * cause of

  my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall

  So, you have reinstalled the HP software after replacing the hard drive?

  What version of Mac OS X are you using?

• Drive hard RAID centrifuge prior to close of Vista 64

  I have a Windows Vista-64 system business two table that uses an Adaptec 2820SA (8 ports Serial ATA RAID) controller. One is a RAID 0 with 4 Western Digital 500 GB SATA disks, and the other is a RAID 5 using 4 of the same readers. As soon as Windows, all 8 hard drives are closed at the same time, and you can hear a click hard when this happens. I think that this could be detrimental to all readers in the near future. Is it possible within Vista to force readers to go down gradually until Windows finishes actually stop? So far, I was unable to find a Microsoft solution to this problem. "Power Option" settings of Vista don't have no effect will not spin down of the 8 disks in the system either (I put the downtime of HDD in 1 minute without effect). This situation is complicated by the fact that I have based on Adaptec tables /-not only simple volumes of hard drive based and logical volumes. It would seem that this problem would be better solved on the Board and/or disk hard unit level physical control, via the Vista driver for the 2820SA). Please advise me on any solution party OR Microsoft who can be available to resolve this problem. I'll post this topic at the site of Support of Adaptec as well. Thank you.

  Hi Na-PaliUSA,

  Thank you for posting.

  Wow, I remember there is 1 million years we could 'buffers Park' on the hard drive.

  But it was probably a mainframe order.

  However, I can't find a single mention about this in my favorite search engine.

  It could have been 70 years when it was happening.

  Unless the manufacturer of your HARD drive can provide you with a way to do this, I don't see any way to do it on Vista.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please, how do I replace the drive hard envy 15-k112nl

  Hello everyone, I bought this model a few days ago and I would like to replace the hard drive with an SSD, but I can't find any instructions for disassembly.
  Can you help me?

  I also add a software problem, whenever you launch the module IGFX not gives more a mistake, how can I do to solve?

  Here is a video that will help you:

  Remove the top cover

  Replace the hard drive with an SSD, it will remove the top cover and the hard drive located in a high bay following the motherboard. It is not as easy as other models that have a door for easy access to the hard drive. While you're there, consider upgrading the memory as it is the same moiré to a chore.

  Replace the SATA drive with the SSD. You should do the recovery HP using HP restore disks and backup utility installed on the computer. Since it's so new a factory reload probably not lose much if any of your data, but you also have the ability to save that, too '

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.