Drive hard RAID centrifuge prior to close of Vista 64

Similar Questions

• HPE 590 t: replace a drive hard raid 0

  My HPE 590 t has 2 hard drives, set up as a pair of RAID 0 disks. One is dead. I used the low level utility to remove the dead from the RAID 0 config reader. Good record is still listed as a disk RAID 0 member. How can I put a new disc, same model, same everything and re-config this new drive as long as the other half of the RAID 0 configuration on the disk is good?

  You can not. Once the disks are configured in RAID 0, the data is distributed through them. If a disk goes bad data on the other drive is gibberish. Unless the entire RAID-0 has been saved or put in mirror (in other words what RAID-5 is) then the data is lost. I'm sorry. It is even more important to backup when you have a RAID-0 because you the chance of failure is double what it would be with a single disc.

  If all you ask is how to restore the RAID 0 with the new command and the old disk, go into the RAID Ctrl-I utility to start and first remove a player from the table and then restore a RAID 0 with two drives.

  This might be useful:

  http://h10032.www1.HP.com/CTG/manual/c01330263.PDF

• Advice on which drive hard buy for Raid

  I'm going to buy http://www.newegg.com/Product/Product.aspx?Item=N82E16822136544 8 these hard drives, and I'll use a http://www.newegg.com/Product/Product.aspx?Item=N82E16816131004 raid controller to implement RAID 3. Western Digital know that these drives are not suitable for the raid, disk only I can find, is a http://www.newegg.com/Product/Product.aspx?Item=N82E16822136797. I was wondering if there is a difference actaul between these two that makes the difference. Also, I was wondering if anyone of you knows another hard drive that would be good for the raid which is less than $ 100.

  Your choice of reader and the controller look good for me.

  I have used a controller Areca with WD black for the past two years, and as long as you do not have a form any backup other than redundancy RAID 5 on your PC, you should be OK with the readers of 'consumer' (aka black WD, Hitachi sister, etc.) as opposed to "enterprise" drives for RAID (AKA WE RE3 RE4, Hitachi Ultrastar etc) systems.

  Records of the company are:

  -usually best parts - possibly some companies choose the best boards with defects less for their dearest readers

  -Sometimes a few features that help with vibrations caused by multiple drives in a PC working in tandem

  -almost always a feature that will keep the drive of the company to continue to try to correct any error while reading or writing beyond a certain number of seconds. WD calles this TLER (time limited error recovery);

  I've seen individuals suggesting that setting the spin-up time is increased from the default.7 seconds up to 1 second when you use consumer readers to help prevent consumer drives marked as bad. I did this and I have never had a car abandoned in two years.

  I have about 50% business (RE3 1 TB WD) and about 50% of consumer records (Black 1 TB 32 MB cache) that are very similar, with the exception of the firmware. In two years, I had a bad drive; No data has been lost, performance just the RAID and even that was pretty subtle. And by the way, it was one of the RE3 drives aren't infected, one of consumer readers! When I started with the WD drives, it was possible to download a software and to set the time on consumer drives TLER and gain many of the benefits models company without having to pay for more expensive readers. Then, a year ago WD changed their line WD Black to defeat this utility (it was a utility WD TLER!) to work with their readers of consumers; Yes, their were some upset users on this one!

  Jim

• cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  Watch 746,39 instead of 3000 GB GB SATA drive, I used Assistant seagate drive but you get an error when you try to use the 'extended capacity manager' - version not supported for nVidia disk controller driver

  where can I get a supported nVidia disk controller driver version if they are available for my system, or windows 7 home 64 bit should recognize the drive anyway?

  thanx

  I just installed a pcie sata II raid startech.com controller, after a slight problem installing the driver, on the third attempt, windows saw the full disk disk management

• My drive hard keeps opening on its own and remains open.

  As soon as I turn my computer on my hard drive opens and it does not close. If I close it manually it just opens again. I try to pop in a disc and it is not even trying to read, he appears just open back. any suggestions?

  Hello

  1 during how long have you had the problem?
  2. don't you make changes before the problem?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

• Embedded OS with additional disk drive using RAID

  Hello!

  I have a PowerEdge R420 with 1 TB of built-in hard drive (no RAID with SATA.) I had 3 additional 500 GB hard drive. I intend to use the entire hard drive 4 hard (1 to that comes with the server and 3 Extra ones I had) as a drive using RAID 5 without lose the OS on my 1 TB which comes with the operating system.

  Please advice kindly.

  You can only do in a RAID managed by OS configuration.

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• New drive HARD and OS upgrade on Equium A210

  I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

  Hello

  Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

• Toshiba T2000SXE - drive HARD work not correctly

  Hello

  Me, it's once again and needs help mine I only before the court it is however more also not drive HARD problems got can help me there is one
  Skype: benny24534
  MSN: benny_elfischnuffi@live
  East of Germany (Germany)

  has also no BACK or as

  Thanks to vorraus to aid

  Hello

  To be honest, I don't understand what you mean :) It would be better if you wrote in German he could understand.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die